i-PRO · AGC20003GM

i-PRO Panasonic 3M Camera Head Cable FOR AG-MDC10G - AGC20003GM

When deploying modular camera systems with separate head units and processor boxes, cable length becomes a critical factor in installation

• 3-meter reach separates AG-MDC10G camera head from processor for tight-space installs.
• Factory-terminated connectors carry video, power, and control signals without field termination.
• NDAA compliant; integrates directly into i-PRO modular camera ecosystem architecture.

i-PRO · AGMDR15

i-PRO Panasonic AGMDR15 Full HD Portable Recorder - Clear

Portable evidence recorder designed for field investigations and surveillance operations requiring a self-contained mobile capture device

• Full HD capture preserves identifiable detail for evidentiary-grade footage.
• Self-contained battery operation enables field deployment without external power.
• Removable media supports direct evidence handoff with chain-of-custody workflows.

i-PRO · VITRAN-OSSPRT-INSTL

I-Pro Per Mile Travel Fee 1X Exterior IP - Vitran-Ossprt-Instl

When deploying exterior IP surveillance systems in remote or distributed locations, travel costs can erode project margins if not properly accounted

• Per-mile billing recovers travel costs precisely for remote exterior IP deployments.
• Compatible with i-PRO Arbitrator, VITRAN, and Investigator vehicle systems.
• Transparent line-item structure supports accurate bid scoping for multi-site rollouts.

i-PRO · MC-PIM400-1501-LC

i-PRO PIM400-1501-LC Panel Interface Module - MC-PIM400-1501-LC

• Extends I/O capacity for door hardware, sensors, and readers without new cable runs.
• Integrates legacy wired readers into i-PRO IP-based access control for unified management.
• Compact form factor fits space-constrained equipment closets and door frame enclosures.

i-PRO · MC-PIM400-485

i-PRO PIM400-485 Panel Interface Module RS485 TO - MC-PIM400-485

PIM400-485 panel interface module that bridges an RS485 serial bus to a Wiegand access-control panel input

• PIM400-485 RS-485/OSDP-to-Wiegand interface module
• Preserves legacy panel during reader bus upgrades
• Single conversion point per supervised reader channel

i-PRO · MC-150-B1002D8PM-1

i-PRO Powersupply: - MC-150-B1002D8PM-1

When you're deploying i-PRO camera systems, power delivery consistency matters as much as the glass you specify

• Eight fused 12V DC / 24V AC outputs deliver 150W total for mixed camera loads.
• Regulated 6A output prevents reboots and firmware corruption during 24/7 operation.
• NDAA-compliant enclosed cabinet rated to -20°C–+49°C suits harsh deployment sites.

i-PRO · MC-150-B1002D8PM-2

i-PRO Powersupply: - MC-150-B1002D8PM-2

When deploying i-PRO multi-sensor camera systems, reliable power distribution becomes critical to system uptime

• Eight fused 12V DC/24V AC outputs consolidate power for multi-sensor camera arrays.
• 150W / 6A capacity supports demanding i-PRO modular camera deployments from one source.
• NDAA-compliant enclosed cabinet operates from -20°C to +49°C for harsh environments.

i-PRO · MC-150-B100C82D8-1

i-PRO Powersupply: - MC-150-B100C82D8-1

150 W LifeSafety Power access-control supply, configured for multi-door access-control deployments

• 150 W output handles multiple maglocks or strikes simultaneously without rail sag.
• Selectable 12 VDC / 24 VDC output adapts to mixed lock and reader hardware on one supply.
• Battery-backed with AC-fail and tamper relays for continuous panel-monitored life-safety power.

i-PRO · MC-150-B100C82D8-2

i-PRO Powersupply: - MC-150-B100C82D8-2

LifeSafety Power-branded access-control power supply sourced through i-PRO for integration with the broader i-PRO/Panasonic security ecosystem

• Selectable 12 VDC / 24 VDC output supports mixed lock and reader hardware in one enclosure.
• Individually fused output channels isolate faults per device, preventing cascade failures.
• Form-C AC-fail and tamper relays feed status directly to your access control panel.

i-PRO · MC-150/250-2C83D

i-PRO Powersupply: - MC-150/250-2C83D

When deploying i-PRO surveillance systems across distributed facilities, power infrastructure determines uptime as much as camera quality

• Selectable 12V DC or 24V AC output at 10A supports mixed camera and access control loads.
• 250W enclosed cabinet supply centralizes power for multi-camera arrays beyond PoE range.
• NDAA-compliant design rated –20°C to +49°C suits outdoor closets and perimeter enclosures.

i-PRO · MC-150/250-2C83D-1

i-PRO Powersupply: - MC-150/250-2C83D-1

When deploying i-PRO camera systems across multiple zones or buildings, inconsistent power infrastructure becomes a liability

• Delivers 250W at 12V DC or 24V AC selectable, supporting diverse i-PRO camera loads.
• 10A output with overcurrent and short-circuit protection prevents cascade failures across camera strings.
• NDAA-compliant, rated -20°C to +49°C for reliable operation in demanding cabinet environments.

i-PRO · MC-150/250-2C83D-2

i-PRO Powersupply: - MC-150/250-2C83D-2

When deploying i-PRO cameras in locations without convenient PoE infrastructure or where local power is more practical, you need a reliable power

• Selectable 12V DC / 24V AC output powers mixed camera deployments from one unit.
• 250W / 10A capacity supports multi-camera loads without separate per-device supplies.
• NDAA-compliant, rated –20°C to +49°C for outdoor and commercial 24/7 installations.

i-PRO · MC-150/250-3D8P2

i-PRO Powersupply: - MC-150/250-3D8P2

When deploying i-PRO PTZ cameras or multi-sensor systems in locations where PoE++ budget falls short or midspan injectors create cable management

• Multi-output power supply for i-PRO cameras
• Selectable 12V DC / 24V AC output at 10A / 250W
• Powers PTZ and fixed cameras exceeding PoE budget

i-PRO · MC-150/250-3D8P2-1

i-PRO Powersupply: - MC-150/250-3D8P2-1

When deploying i-PRO camera systems across multi-building campuses or distributed locations, maintaining consistent power delivery becomes critical

• Eight individually fused 12V DC/24V AC outputs consolidate power for up to 8 devices.
• 250W capacity at 10A supports full i-PRO MC-150/250 series deployments from one unit.
• Enclosed cabinet form factor rack-mounts cleanly alongside switches and NVRs in IDFs.

i-PRO · MC-150/250-3D8P2-2

i-PRO Powersupply: - MC-150/250-3D8P2-2

When deploying i-PRO camera systems across multiple zones or buildings, centralized power distribution reduces installation complexity and improves

• 8 individually fused outputs isolate faults, protecting the full camera bus during failures.
• Selectable 12V DC / 24V AC output at 10A / 250W flexes across mixed camera and access control loads.
• NDAA-compliant enclosed cabinet rated –20°C to +49°C suits outdoor closets and rack deployments.

i-PRO · MC-250/250-3C85D-1

i-PRO Powersupply: - MC-250/250-3C85D-1

When deploying i-PRO camera systems across multiple zones or large facilities, maintaining clean, reliable power delivery is critical to system

• Selectable 12V DC / 24V AC output at 10A / 250W supports mixed camera deployments.
• Enclosed cabinet form factor mounts in equipment closets for centralized fault isolation.
• NDAA-compliant design rated -20°C to +49°C suits indoor and conditioned outdoor installs.

i-PRO · MC-75-B100C4D8PE

i-PRO Powersupply: - MC-75-B100C4D8PE

75 W LifeSafety Power FPO75-class access-control supply for small-to-medium door counts

• 75 W FPO75-class output supports small door counts without over-provisioning space.
• Selectable 12/24 VDC output and SLA battery charging simplify multi-door deployments.
• Individually fused channels plus AC-fail and tamper outputs enable panel-level monitoring.

i-PRO · MC-150-B100C8D8-1

i-PRO Powersupply: FPO150-B100C8D8PE6M 150W - MC-150-B100C8D8-1

When you're deploying multi-camera installations with PTZ units, high-resolution encoders, or edge recording devices, inconsistent power delivery

• 150W continuous output supports PTZ motors and multi-camera loads without voltage sag.
• Over-current and short-circuit protection prevents downstream equipment damage on faults.
• Compact form factor integrates cleanly into equipment closets, racks, or enclosures.

i-PRO · MC-150-B100D8PM8

i-PRO Powersupply: FPO150-B100D8PM8NL4E4M - MC-150-B100D8PM8

150 W LifeSafety Power FPO150-B100D8PM8NL4E4M access-control supply

• 150 W regulated DC output supports strikes, maglocks, readers, and accessories on one bus.
• Selectable 12 VDC/24 VDC output with individually fused channels protects each connected device.
• Battery-backed design with AC-fail and tamper outputs enables monitored, code-compliant deployment.

i-PRO · MC-150-B100D8PM8-1

i-PRO Powersupply: FPO150-B100D8PM8NL4E6M - - MC-150-B100D8PM8-1

150 W LifeSafety Power access-control supply with the FPO150-B100D8PM8NL4E6M configuration, providing battery-backed power for a multi-door

• 150 W LifeSafety supply handles simultaneous maglock/strike inrush without rail sag.
• Selectable 12/24 VDC output supports mixed lock and reader hardware in one enclosure.
• Individually fused outputs and Form-C AC-fail/tamper relays simplify panel monitoring.

i-PRO · MC-150/250-2C83D-4

i-PRO Powersupply: FPO150/250-2C83D8PE8M2 - MC-150/250-2C83D-4

When deploying multiple PoE cameras across a site without sufficient switch capacity or in locations where running data drops isn't practical, you

• Delivers up to 250W at 10A from a single enclosed cabinet, eliminating per-camera injectors.
• Selectable 12V DC or 24V AC output supports mixed access control and CCTV device deployments.
• NDAA-compliant design rated for –20°C to +49°C suits indoor closets and outdoor enclosures.

i-PRO · MC-1502502D8P28MN

i-PRO Powersupply: FPO150/250-2D8P2M8NL4E4M1 - MC-1502502D8P28MN

Redundant DC power supply module designed for mid-to-large surveillance recording and network infrastructure deployments

• Dual independent power paths with automatic failover eliminate single points of failure.
• Load-sharing across both channels reduces thermal stress and extends MTBF in NVR stacks.
• Integrated short-circuit, overvoltage, and thermal protection guards downstream equipment.

i-PRO · MC-75-B100C4D8PE-4

i-PRO Powersupply: FPO75-B100C4D8PE4M 75W - MC-75-B100C4D8PE-4

75 W LifeSafety Power FPO75-B100C4D8PE4M access-control supply for small-to-medium door counts

• 75 W output suits small-to-medium door counts without over-provisioning closet space.
• Selectable 12 VDC/24 VDC output accommodates mixed lock and reader hardware on one supply.
• Individual fused channels plus AC-fail and tamper outputs enable panel-monitored fault isolation.

i-PRO · MC-FPV4-E2M/4TX

i-PRO Powersupply: FPV4-E2M/4TX 4DR 6A/12V OR - MC-FPV4-E2M/4TX

When deploying multi-door access control systems, unreliable power distribution kills projects before they start

• Delivers 6A at 12VDC across 4 fused outputs for reliable multi-door power distribution.
• Per-output overcurrent protection isolates faults without disrupting adjacent access points.
• NDAA-compliant enclosed cabinet rated -20°C to +49°C suits mechanical rooms and IT closets.

i-PRO · TRTN-CAGE-IPS

i-PRO Protective Cage - TRTN-CAGE-IPS

Hardened protective cage built for the Triton in-vehicle platform

• Steel-reinforced enclosure shields the Triton DVR from impact and vibration.
• Tamper-resistant fasteners prevent unauthorized field access to the recorder.
• Pre-formed cable routing keeps power, GPS, and LTE leads under strain relief.

i-PRO · MC-6005-BGB00

i-PRO Proxp Wieg Classic GRY CBL Lead Free - MC-6005-BGB00

When integrating legacy proximity card readers into modern access control systems, cable compatibility and regulatory compliance become critical

• Lead-free construction satisfies RoHS compliance for regulated institutional deployments.
• Wiegand interface supports standard 26-bit and extended-format proximity card readers.
• Pre-terminated connections reduce field wiring time and minimize termination errors.

i-PRO · MC-6005-BKB00

i-PRO Proxpt Wieg Classic BLK CBL Rohs Prox DFM - MC-6005-BKB00

When you need reliable proximity credential reading for standard access control installations, stripping out unnecessary complexity saves both time

• Wiegand output connects directly to virtually any access control panel without adapters.
• Included cable reduces field variables and eliminates connector compatibility issues.
• RoHS-compliant black housing suits professional commercial and institutional deployments.

i-PRO · MC-923NPRNEK0000Q

i-PRO RDR RKCL40-P Pivclass SE E Cont LCD LF - MC-923NPRNEK0000Q

When you need to control access at entrances where contactless convenience meets stringent security requirements, credential readers that balance

• Reads both 125 kHz prox and 13.56 MHz smart cards, protecting existing credential investments.
• Wiegand, RS-485, and OSDP outputs integrate with virtually any existing access control panel.
• NDAA-compliant and PIV/iCLASS SE-ready for government and enterprise PKI deployments.

i-PRO · MC-920PHRNEK00004

i-PRO RDR RP40-H Pivclass SE E LF STD HF - MC-920PHRNEK00004

When you need reliable credential authentication for multi-tenant facilities or high-security zones without the complexity of managing proprietary

• Reads both 125 kHz LF and 13.56 MHz HF credentials from one unit, easing migration.
• OSDP, RS-485, and Wiegand outputs integrate with virtually any access control panel.
• NDAA-compliant and rated –30°C to +65°C for secure indoor or protected exterior installs.

i-PRO · MC-921PTNNEK00000

I-Pro Rdr RPK40 Multiclass Se Rev E Kpd Std - MC-921PTNNEK00000

When your access control deployment requires credential flexibility without sacrificing security, single-technology readers create unnecessary

• Reads 125 kHz prox and 13.56 MHz iCLASS SE/MIFARE in one device, eliminating reader swaps during migration.
• Wiegand, RS-485, and OSDP outputs ensure compatibility with virtually all commercial access control panels.
• Rated –30°C to +65°C with NDAA compliance, supporting exterior installs in regulated federal environments.

i-PRO · MC-6005-BKB

i-PRO Reader: Black Mini Mullion HID 125KHZ - MC-6005-BKB

• Reads HID 125kHz proximity cards, preserving existing credential infrastructure.
• Mini mullion form factor fits narrow jambs, glass doors, and aluminum storefronts.
• Wiegand output integrates directly with standard access control panels.

i-PRO · MC-5365-EKP

I-Pro Reader: Black Miniprox HID 5365 Mullion - MC-5365-EKP

When installing access control in narrow door frames, mullions, or space-constrained entryways, standard readers won't fit

• Mullion-mount form factor fits narrow door frames and aluminum storefront systems.
• 125 kHz HID Prox compatibility integrates with existing card credential infrastructure.
• Wiegand output connects directly to any standard access control panel.

i-PRO · MC-921-PTNN

i-PRO Reader: Black Wall Switch HID Multiclass - MC-921-PTNN

Wall-switch-form-factor multiclass reader finished in black, designed for visually clean access-control installations

• Reads iClass SE, iClass legacy, and 125 kHz Prox cards from a single reader.
• Wiegand output integrates with virtually any existing access-control panel.
• Wall-switch form factor fits standard single-gang boxes for flush, low-profile installs.

i-PRO · MC-921-PMNN

i-PRO Reader: Black Wall Switch HID Multiclass SE - MC-921-PMNN

i-PRO · MC-5395-CK100

i-PRO Reader: Black Wall Switch HID Thinline - MC-5395-CK100

Access control deployments demand readers that integrate seamlessly with existing infrastructure while delivering reliable credential management

i-PRO · MC-6005-BGB

i-PRO Reader: Charcoal Gray Mini Mullion 125KHZ - MC-6005-BGB

When door frame real estate is tight or aesthetic requirements demand a low-profile solution, standard-sized readers become a liability

• Mini mullion form factor fits narrow door frames and space-constrained mount points.
• 125kHz proximity with Wiegand output integrates with virtually all access control panels.
• LED and beeper credential feedback reduces user error at high-traffic entry points.