Altronix

Altronix · NETWAYSP41BTWPX

Altronix 4PT CON/NO LINQ/2SFP/LGNEMA4 - NETWAYSP41BTWPX

Compact, managed 4-port PoE+ Ethernet switch designed for deploying IP devices in environments where extended network reach and reliable power

Altronix · WP5

Altronix WP5 18x16 NEMA-Rated Steel Enclosure

18"×16" NEMA steel enclosure for outdoor security equipment

• NEMA-rated steel construction shields electronics from rain, dust, and corrosion outdoors.
• Wall and pole mount options suit perimeter gates, facades, and space-constrained sites.
• 18"×16" interior with 24.9 lb steel body resists tampering and dissipates heat from power loads.

Altronix · WP4

Altronix WP4 NEMA 4/4X IP66 Stainless Steel Enclosure

Stainless steel NEMA 4/4X IP66 enclosure for coastal & corrosive sites

• NEMA 4/4X and IP66 rating blocks windblown dust and water spray from any direction.
• Stainless steel construction resists corrosion in coastal, salt-air, and chemical environments.
• Five integrated network ports connect up to five devices; wall or pole mount supported.

Altronix · WP3

Altronix WP3 NEMA 4/IP66 Outdoor Power Enclosure

Weather-sealed outdoor enclosure rated NEMA 4/IP66 for power distribution

• NEMA 4/IP66 rating blocks dust and direct water jets for reliable outdoor deployment.
• Compact 13.3"H × 11.3"W × 5.6"D body fits wall or pole mounts with minimal site impact.
• Corrosion-resistant construction and lifetime warranty reduce long-term maintenance overhead.

Altronix · WP2

Altronix WP2 NEMA 4/IP66 Outdoor Power Enclosure

NEMA 4/IP66 sealed enclosure with 5 network ports for outdoor power and PoE

• NEMA 4/IP66 rating blocks rain, dust, and water jets for reliable outdoor deployment.
• Five built-in RJ-45 ports eliminate external switches, cutting cable runs and labor.
• Lifetime warranty backs consolidated power, battery backup, and networking in one enclosure.

Altronix · WG1

Altronix WG1 NEMA Rated Wire Gland Inlet

NEMA-rated sealed wire gland inlet for outdoor enclosures

• Maintains NEMA 3, 4, 4X, and 12 ratings so cable entries don't downgrade enclosure protection.
• Sealed gland design blocks moisture and dust ingress at outdoor, dock, and plant installations.
• Lifetime limited warranty reduces replacement risk on long-deployed enclosure systems.

Altronix · VR6

Altronix VR6 24VDC to 5VDC/12VDC Voltage Regulator

24VDC to 5V or 12V regulator, 2A output, PoE-compatible

• Selectable 5VDC or 12VDC output at 2A continuous simplifies mixed-voltage deployments.
• Accepts 24VDC PoE input, reducing dedicated panel-mounted power supplies at remote nodes.
• Built-in fire alarm disconnect enables safe isolation during emergency shutdown sequences.

Altronix · VR1T

Altronix VR1T 24V to 12V Conversion Module 1A

24V to 12V converter, 1A continuous, accepts AC or DC input

• Accepts 24VAC or 24VDC input, eliminating rewiring in retrofit deployments.
• Regulated 12VDC output at 1A continuous protects sensitive peripherals from over-voltage.
• Compact 2.375"×1.625"×1" form factor mounts inside standard enclosures without extra space.

Altronix · VR1M14

Altronix VR1M14 Voltage Regulator 24VAC/VDC To 14VDC 1A

Compact 24V to 14V regulator, 1A output for security systems

• Accepts 24VAC or 24VDC input, eliminating rewiring when mixing AC and DC infrastructure.
• Fixed 14VDC regulated output at 1A prevents nuisance resets on auxiliary and legacy devices.
• 2.375" × 1.625" × 1" footprint with pigtail leads fits tight enclosures without junction boxes.

Altronix · VR10

Altronix VR10 10A Voltage Regulator

10A voltage regulator converts 24VDC to 12VDC for security systems

• Delivers stable 12VDC at 10A from a 24VDC backbone, eliminating per-device supplies.
• DIN rail mount (5.375"×3"×1") drops into existing cabinets without special hardware.
• Suppresses input ripple and transients that cause relay chatter and solenoid wear.

Altronix · VR1

Altronix VR1 24VAC/VDC to 12VDC Conversion Module

Converts 24VAC/VDC to regulated 12VDC with AC fail monitoring

• Accepts 24VAC or 24VDC input, eliminating separate modules in mixed-voltage installations.
• Regulated 12VDC output at 1A keeps readers, strikes, and sensors stable under load variations.
• Built-in AC fail supervision signals power loss or brownout to your access control panel.

Altronix · VERTILINE48M

Altronix VERTILINE48M 56VDC 6.5A 8-Output Rack Supply

56VDC rack supply with 8 fused outputs for access control and security systems

• Eight independently fused outputs isolate load faults, preventing cascade failures.
• Delivers regulated 56VDC at 6.5A continuous for access control and security loads.
• 2U rack-mount form factor integrates directly alongside switches and controllers.

Altronix · TS112

Altronix TS112 Plunger Tamper Switch

Mechanical plunger switch detects cabinet access with dry-contact relay output

• Dry-contact relay output integrates directly with any alarm panel or BMS input.
• Requires no power source, so cabinet intrusion alerts fire even when the network is down.
• Compact 1.22 × 1.19 × 1.05 mm footprint fits tight enclosure frames with included bracket.

Altronix · TROVE3M3

Altronix TROVE3M3 Integrated Access Power Enclosure

Modular rack/wall enclosure for centralized access control power distribution

• Centralized 24VDC power delivery eliminates per-door supplies and reduces installation labor.
• Wall or rack mount flexibility adapts to equipment room or secure closet deployments.
• Lifetime warranty backs a US-manufactured chassis rated for multi-circuit access control loads.

Altronix · TROVE3AM3

Altronix TROVE3AM3 Access Control Enclosure With Backplane

Compact unified backplane for multi-module access control systems

• Integrated TAM3 backplane eliminates point-to-point wiring across control modules.
• Rack-mount form factor suits space-constrained IDF closets and control rooms.
• Lifetime Limited Warranty reduces long-term lifecycle risk on critical infrastructure.

Altronix · TROVE3

Altronix TROVE3 Large Enclosure For Backplanes

Modular enclosure for centralized power and access control integration

• Modular design accepts Trove3 Series backplanes for flexible power and access configs.
• Consolidates power distribution and access control into one enclosure footprint.
• Lifetime warranty supports long-term deployment reliability in professional installations.

Altronix · TROVE2PX2

Altronix TROVE2PX2 Access Control Integration Enclosure

DIN-rail integration enclosure for access control power and I/O consolidation

• Integrated backplane eliminates custom wiring between power, relay, and control modules.
• Hot-swappable card design allows module replacement without powering down the enclosure.
• Wall or rack mountable chassis consolidates access control I/O into one 27.25"×21.5" unit.

Altronix · TROVE2M2SX

Altronix TROVE2M2SX Secure Enclosure with Mercury Backplane

UL Listed secure enclosure with pre-integrated Mercury backplane and tamper switch

• UL Listed construction delivers immediate code compliance documentation at project closeout.
• Pre-integrated Mercury backplane eliminates 2–4 hours of bench assembly labor per unit.
• Hard-wired tamper switch provides real-time intrusion alerts for unattended access control nodes.

Altronix · TROVE2M2

Altronix TROVE2M2 Access Control & Power Integration Enclosure

24VDC access control & power in one UL-listed enclosure

• Integrated backplane eliminates external harnesses, cutting per-door wiring labor significantly.
• UL Listed enclosure supports 24VDC power with wall or rack mounting for flexible deployment.
• Lifetime warranty covers Mercury module and Altronix power supply integration in one chassis.

Altronix · TROVE2KH2

Altronix TROVE2KH2 Access Control Integration Enclosure

Kantech access control integration platform with internal backplane

• Internal backplane eliminates point-to-point jumper wiring, cutting commissioning time.
• Supports wall or 19-inch rack mounting to fit telecom closets and security rooms.
• Lifetime warranty on a US-made enclosure reduces long-term replacement risk.