Transition Networks

Transition Networks · S8TB

Transition Networks Unmanaged Switch 8-PORT Gigabit Ethernet - S8TB

Transition Networks · M/E-ISW-FX-02(SC)

Transition Networks Industrial Mini Converter 10/100BTX to 100BFX SC MM 2km - M/E-ISW-FX-02(SC)

Transition Networks · XSDR22000-01

Transition Networks XSDR22000-01 10-Port 10G Unmanaged Switch

10-port 10G single-mode fiber switch, unmanaged, DIN rail mount

• All 10 ports run 10G single-mode fiber, eliminating copper distance limits on backbone runs.
• Unmanaged, fanless design enables deploy-and-forget installation with zero configuration overhead.
• 35mm DIN rail mount and industrial temperature rating suit field panels and outdoor enclosures.

Transition Networks · XDT2321002-01-S

Transition Networks XDT2321002-01-S Serial Device Server

RS232-to-Ethernet converter for legacy serial devices on IP networks

• Bridges RS232 serial devices to IP networks via a single managed Ethernet port.
• Supports baud rates up to 921.6 Kbps, handling alarm events and config updates cleanly.
• Remote management via SNMP, HTTP, Telnet, and TFTP eliminates on-site console access.

Transition Networks · UD2100002-01

Transition Networks UD2100002-01 Serial-to-Ethernet Device Server

Serial-to-Ethernet gateway for 2 legacy devices on modern networks

• Two independent serial ports (RS232/RS422/RS485) gateway two legacy devices per unit.
• SNMP, Telnet, and HTTP support enables remote config without proprietary management tools.
• DIN rail mount simplifies installation in control cabinets and industrial enclosures.

Transition Networks · UD2100001-01

Transition Networks UD2100001-01 2-Port Serial Device Server

2-port serial device server with DIN rail mount for IP network access

• Two independent RS232/RS422/RS485 ports consolidate legacy serial devices under one IP.
• DIN rail mount fits directly into existing industrial enclosures with no shelf rework.
• Telnet, HTTP, and SNMP management enable NOC integration with lifetime warranty coverage.

Transition Networks · UD1100IA2-01

Transition Networks UD1100IA2-01 Industrial Device Server

10 Gigabit industrial switch with single-mode fiber for DIN rail

• Ten Gigabit ports over single-mode fiber eliminate copper distance and EMI limits.
• Unmanaged operation removes VLAN and spanning-tree complexity from serial-to-Ethernet bridging.
• DIN rail mount installs directly in control cabinets alongside PLCs with no custom fabrication.

Transition Networks · UD1100002-01

Transition Networks UD1100002-01 One-Port Device Server

Serial-to-IP gateway bridges RS232/422/485 devices to Ethernet networks

• One-port RS232/RS422/RS485 multi-protocol serial device server
• Single unit covers all three serial standards from one chassis
• DIN rail mount managed via SNMP, Telnet, or HTTP at the cabinet

Transition Networks · UD1100001-01

Transition Networks UD1100001-01 Serial Device Server

Serial device server converts RS232/422/485 equipment to Ethernet

• Supports RS232, RS422, and RS485 in one unit, eliminating per-protocol converter stocking.
• UL864 certified for direct integration into fire alarm and life safety serial networks.
• DIN-rail form factor installs into standard control cabinets without additional mounting hardware.

Transition Networks · TN-SFP-TX

Transition Networks TN-SFP-TX SFP Transceiver Module

100Base-TX copper SFP module for standard slot compatibility

• Adds a 100Base-TX copper port via standard SFP slot—no chassis replacement needed.
• Hot-swappable design allows live insertion/removal with zero downtime or reboots.
• Lifetime warranty backs deployment in door controllers, intercoms, and edge sensors.

Transition Networks · TN-SFP-T-MG

Transition Networks TN-SFP-T-MG SFP Transceiver Module

1 GbE SFP transceiver module, 328 ft reach, hot-swappable form factor

• Delivers 1 Gbps throughput over copper—no fiber or media converters required.
• Hot-swappable Mini-GBIC form factor allows field replacement without system downtime.
• TAA-compliant design supports federal, state, and municipal procurement workflows.

Transition Networks · TN-SFP-SX

Transition Networks TN-SFP-SX Multimode SFP

1 Gbps multimode SFP transceiver for campus fiber links up to 2 km

• Delivers 1 Gbps line rate over multimode fiber for campus and intra-building links.
• Hot-swappable SFP installs into live switches and routers with zero downtime.
• TAA compliant, supporting U.S. federal and GSA procurement requirements.

Transition Networks · TN-SFP-OC3M

Transition Networks TN-SFP-OC3M Fast Ethernet SFP Transceiver

100 Mbps multimode fiber SFP for campus links up to 1.2 miles

• Delivers 100 Mbps full-duplex over multimode fiber via duplex LC connector.
• Reaches up to 1.2 miles on existing OM1/OM2 fiber without media converters.
• TAA compliant with lifetime warranty; drops into any standard SFP slot.

Transition Networks · TN-SFP-LX1T

Transition Networks TN-SFP-LX1T Gigabit SFP Transceiver Module

1 Gbps multimode fiber SFP for plug-and-play network expansion

• Delivers 1 Gbps throughput over multimode fiber for dense IP camera deployments.
• LC duplex interface integrates with existing multimode cabling without fiber upgrades.
• TAA-compliant design with lifetime warranty reduces long-term procurement risk.

Transition Networks · TN-SFP-LX1

Transition Networks TN-SFP-LX1 Gigabit SFP Transceiver Module

1 Gbps SFP transceiver for multimode fiber runs up to 6.2 miles

• Delivers 1 Gbps over multimode fiber up to 10 km, eliminating campus repeaters.
• 1000Base-LX at 1310 nm fits existing OM2/OM3/OM4 fiber without cabling upgrades.
• TAA-compliant design meets federal and enterprise procurement policy requirements.

Transition Networks · TN-SFP-GE-S-C

Transition Networks TN-SFP-GE-S-C Gigabit SFP Module

1 Gbps multimode fiber SFP for network switches and routers

• Delivers 1 Gbps over multimode fiber with reach up to 550 m per segment.
• Hot-pluggable SFP form factor fits any compatible switch port—no chassis swap needed.
• Lifetime warranty reduces long-term replacement risk in permanent infrastructure runs.

Transition Networks · TN-SFP-25G-SR-S

Transition Networks TN-SFP-25G-SR-S SFP28 10G Multimode

10G multimode SFP28 transceiver for short-reach datacenter links

• Runs 10G over OM3/OM4 multimode fiber, avoiding single-mode infrastructure costs.
• LC duplex interface fits existing patch panels, minimizing recabling on upgrades.
• Cisco Catalyst and Nexus compatible; verify SFP28 slot support before ordering.

Transition Networks · TN-SFP-10G-SR

Transition Networks TN-SFP-10G-SR 10G Multi-Mode SFP+ Module

10G SFP+ module for multi-mode fiber up to 300–400m

• Delivers full 10 Gbps line rate over existing OM3/OM4 multi-mode fiber.
• Reaches up to 300m at 850nm, covering intra-datacenter and campus backbone runs.
• Hot-swappable SFP+ form factor enables live insertion without powering down the switch.

Transition Networks · TN-SFP-10G-LR

Transition Networks TN-SFP-10G-LR 10GBASE-LR Sfp+ Module

10G single-mode SFP+ module for 10 km metro and data center links

• Delivers 10 Gbps over single-mode fiber across 10 km spans without repeaters.
• DMI provides real-time monitoring of optical power, temperature, and bias current.
• Hot-pluggable SFP+ form factor installs into Cisco, Arista, Juniper, and HPE ports.

Transition Networks · TN-GLC-SX-MM-RGD

Transition Networks TN-GLC-SX-MM-RGD Gigabit SFP Module

Gigabit multi-mode SFP for managed switches in industrial temps

• Delivers 1 Gbps over multi-mode fiber for campus and inter-building uplinks.
• Industrial temperature rating keeps optics stable in unconditioned or outdoor cabinets.
• Hot-pluggable SFP form factor allows live swap without switch downtime or reconfig.