i-PRO WJ-NX400/3000T3 64-Channel Network Video Recorder
Overview
The i-PRO WJ-NX400/3000T3 is a 64-channel network video recorder built for multi-site retail, banking, educational, and hospitality environments where you need simultaneous recording from dozens of IP cameras on a single appliance. It ships with 3TB of pre-installed storage and supports H.265 compression—a codec that cuts storage overhead roughly in half versus H.264 on identical footage, meaningful when recording 24/7 across dozens of channels. The unit supports native 64-camera capacity with future expansion to 128 channels, and total storage reaches 324TB across internal and supplemental drives. Remote access via mobile and web interfaces enables monitoring and playback from any internet-connected endpoint, essential for multi-location security operations where on-site review isn't always practical.
Compatibility
The WJ-NX400/3000T3 is ONVIF Profile S compliant, meaning it integrates with any ONVIF-capable IP camera regardless of brand—Axis, Hikvision, Uniview, Hanwha, and others require no proprietary gateway hardware. The recorder supports integration with major VMS platforms for centralized management across multiple NVRs or sites; confirm specific VMS compatibility (Milestone, Genetec, etc.) with the system manual or manufacturer before deployment, as integration breadth varies by firmware release. Automatic camera configuration simplifies initial setup but does not replace per-camera tuning for resolution, frame rate, or quality settings. Legacy or proprietary systems may require manual IP assignment rather than ONVIF auto-discovery.
Installation Notes
Standard rack or shelf mounting with 12V DC power input. Verify your network switch can deliver sufficient bandwidth for simultaneous recording streams—a 64-camera system running H.265 still requires adequate uplink capacity, particularly at higher frame rates or resolutions. Pre-installation, confirm your camera lineup is ONVIF-discoverable; some older systems need manual provisioning. Allow for thermal management in enclosed racks—the recorder generates measurable heat under continuous 64-channel load.
