Infrastructure
Sub categories
Showing Results for Infrastructure
-
GRI
SKU: 2600
GRI 2600 Water Sensor with Relay
Passive water sensor with relay for 12V/24V alarm systems, no power needed
- Water sensor with built-in N.O. relay - no intermediate switching
- Conductive moisture probe distinguishes water from humidity
- 12V/24V alarm system compatible for direct panel zone wiring
$44.00 $28.99 Save $15.01 -
GRI
SKU: 4561
GRI 4561 Tilt Sensor
Miniature tilt sensor detects 13.3mm displacement for tamper detection
- Compact 2.0 x 0.75 inch tilt sensor for covert equipment monitoring
- Detects panel, cabinet, or display rotation away from secured position
- 25A switching capacity, 5VA max for direct alarm zone wiring
$18.99 -
GRI
SKU: 4561R
GRI 4561R Tilt Sensor with Relay
Tilt sensor with relay output for door and window monitoring
- Tilt sensor with integrated N.O./N.C. relay output to panel
- Switches clean contact closure - no software parsing needed
- 5VA max switching capacity for direct alarm zone integration
$25.99 -
GRI
SKU: DPARM
GRI DPARM Closed Loop Pool Access Alarm
Closed-loop pool perimeter alarm with integrated access control
- Closed-loop pool access alarm with continuous circuit monitoring
- Detects tampering or line cuts immediately - no silent failures
- 9V battery operation - drop-in for residential pool perimeter
$163.99 -
GRI
SKU: GR3045
GRI GR3045 Panic Switch
Hardwired panic switch with 80A relay capacity for emergency response
- Finger-tip panic switch handles up to 80A direct alarm relay loads
- Deliberate-actuation lever prevents accidental triggering
- Operates 32 to 140 degrees F for unconditioned panic-button placement
$34.92 $24.99 Save $9.93 -
GRI
SKU: H8800
GRI H8800 Humidity Sensor
Precision RH sensor for HVAC, data centers, and facility monitoring
- Humidity sensor for HVAC, climate control, and facility monitoring
- 10VDC operation drops into standard sensor power buses
- Reliable output for commercial and industrial environment tracking
$239.58 $187.99 Save $51.59 -
GRI
SKU: PAA
GRI PAA Pool Access Alarm
Standalone pool perimeter alarm with instant visual and audible alert
- Closed-loop pool access alarm tuned for pool perimeter coverage
- Ultralife 9V lithium battery for multi-year unattended operation
- Filters wind, animals, and vegetation movement false alarms
$176.48 $175.99 Save $0.49 -
GRI
SKU: SG-2
GRI SG-2 ShockTec Vibration Sensor
Ground vibration sensor with 5–500 Hz detection for perimeter breach warning
- ShockTec vibration sensor detects climbing, cutting, and impact
- Standoff warning before intruder reaches the fence or barrier
- 12V DC or battery operation - relay contact closure to panel
$88.06 $62.99 Save $25.07 -
GRI
SKU: T8800
GRI T8800 Temperature Sensor
Industrial temperature sensor for HVAC control and facility automation
- Industrial temperature sensor for factory floor and server rooms
- 10VDC operation drops into standard environmental monitoring loops
- US-made 1 lb housing for outdoor equipment enclosure deployments
$156.92 $112.99 Save $43.93 -
GRI
SKU: WVS
GRI WVS Water Valve Shutoff
Automatic water shutoff controller stops floods at the source
- Automatic water valve shutoff triggers on flood or abnormal flow
- 55 mA draw at 12V DC - low alarm panel aux power impact
- Integrated battery backup keeps shutoff active during AC outage
$540.39 $426.99 Save $113.40 -
Allied Telesis
SKU: AT-GS970M/10PS-R-10
Hanwha AT-GS970M/10PS-R-10 8-Port PoE+ Switch
8-port PoE+ switch with 124W budget for IP camera deployments
- 8× Gigabit PoE+ ports (15W each) plus 2× SFP uplinks for fiber or copper
- 20Gbps switching fabric, 14.9Mpps throughput, non-blocking across all ports
- Fanless design runs silent at 33 dB in compact 210×275×42.5mm chassis
$972.00 $721.99 Save $250.01 -
Allied Telesis
SKU: AT-GS970M/18PS-R-10
Hanwha AT-GS970M/18PS-R-10 16-Port PoE+ Switch
16-port PoE+ switch with 247W budget for surveillance and access points
- 247W total PoE+ power supports 16 devices at 15W or 8 at full 30W each
- 36 Gbps switching fabric with 26.8 Mpps forwarding rate for low-latency performance
- Dual SFP fiber uplink ports for redundant long-distance trunk connections
$1,057.00 $846.99 Save $210.01 -
Allied Telesis
SKU: AT-GS970M/28PS-10
Hanwha AT-GS970M/28PS-10 24-Port PoE+ Switch
24-port PoE+ switch with 370W budget for IP cameras and access control
- 24 Gigabit PoE+ ports at 370W total—runs 24 devices @ 15W or 12 @ 30W
- 56 Gbps switching fabric, 41.7 Mpps forwarding for non-blocking line-rate
- 1U rackmount (440×290×44mm), 33 dBA quiet, 520W max power consumption
$1,438.00 $1,149.99 Save $288.01 -
Allied Telesis
SKU: AT-GS980M/52PS-10
Hanwha AT-GS980M/52PS-10 48-Port Gigabit PoE+ Switch
48-port Gigabit PoE+ switch with 740W power for enterprise surveillance
- 48 x Gigabit PoE+ ports deliver 15W per port or 30W on 24 ports
- 104Gbps switching fabric with 77.4Mpps throughput for low-latency performance
- Four SFP uplink ports and managed VLAN/QoS in compact 1RU rack form
$1,836.00 $1,655.99 Save $180.01 -
Allied Telesis
SKU: AT-IE220-10GHX-980
Hanwha AT-IE220-10GHX-980 Industrial PoE++ Switch
Compact fanless PoE++ switch with 240W budget for industrial edge
- 8 × Gigabit PoE ports (2 × PoE++ up to 90W, 8 × PoE+ 30W)
- Dual 1/10G SFP+ uplinks with 56Gbps switching fabric
- DIN rail, 37–57V DC input, 18.5W max draw, IP30 rated
$1,618.00 $1,223.99 Save $394.01 -
Allied Telesis
SKU: AT-IE220-6GHX-980
Hanwha AT-IE220-6GHX-980 Industrial PoE++ Switch
Industrial 6-port PoE++ switch with 180W budget for distributed camera systems
- 2x PoE++ (90W) + 4x PoE+ (30W) ports support PTZ cameras and thermal sensors
- 48 Gbps switching fabric with 2x 10G SFP+ uplinks for backbone connectivity
- Fanless aluminum chassis, IP30 rated, 37–57V DC input on compact DIN rail mount
$1,040.00 $862.99 Save $177.01
Infrastructure
Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.
Plan Your Deployment
- Total PoE power budget and port density requirements
- Switch throughput and uplink capacity planning
- Redundancy and failover design considerations
- Distance limitations and fiber conversion needs
- Power conditioning and voltage compatibility















