Comnet 24VAC 1 Amp Power Supply For Managed Switch - PS24-1A

Comnet PS24-1A 24VDC Switching Power Supply

Overview

The Comnet PS24-1A is a 24VDC 1.3A switching power supply rated for 30W continuous output, designed to power managed switches and networked infrastructure in surveillance and access control deployments. Input voltage range of 100–240VAC (47–63Hz) eliminates regional power supply concerns — standard US or international mains feed both work without reconfiguration. The unit is DIN rail mounted, fitting standard 35mm industrial enclosures alongside network gear, PLC controllers, and access panels. This is the right choice when you need regulated 24VDC delivery in a compact, rack-integrated form factor.

Compatibility

The PS24-1A outputs 24VDC at up to 1.3A (30W max), making it suitable for Comnet managed switches and industrial network devices rated for 24V operation. It is also compatible with auxiliary circuits in access control systems, door strike controllers, and alarm panel auxiliary power inputs that require 24VDC at currents under 1.3A. Verify the target device's voltage and current rating before installation — if the device draws more than 1.3A at 24V, or requires a different voltage (e.g., 12VDC), this unit is not a match.

Installation Notes

Mounting: DIN rail installation only — slides onto standard 35mm rail in any orientation. Wiring: AC input and DC output terminal blocks accept 14–18 AWG wire. Ensure input AC is protected by a circuit breaker rated for the supply branch (800mA max inrush). Environmental operating range: −40°C to +85°C, making this suitable for outdoor equipment cabinets and unheated storage buildings. Output stability: ±1% voltage accuracy with 50mV ripple and noise — clean enough for logic circuits and switching supplies, but verify ripple tolerance against sensitive analog or RF equipment if applicable. Protection: Overvoltage clamping set to 120–145% of nominal output (28.8–34.8V); output will be suppressed if input transients exceed this range. >83% efficiency reduces heat load in enclosed cabinets.

What's in the Box

• 1x Comnet PS24-1A 24VDC 1.3A power supply