UISP Service Provider Equipment | Ubiquiti ISP/WISP Infrastructure

Q: What is UISP and who should use it?

UISP (Ubiquiti Service Provider) is a platform of managed networking equipment designed for Internet service providers (ISPs), wireless service providers (WISPs), and large enterprise networks. It includes routers, switches, GPON access equipment, and monitoring software. Use UISP if you operate a multi-site network with high uptime requirements, need carrier-grade redundancy, or deploy FTTH/FTTB fiber services.

Q: How do I choose between UISP GPON and traditional Ethernet backhaul?

GPON is cost-effective for large subscriber counts (100+) per fiber run, because passive splitters eliminate the need for active equipment at each subscriber. Ethernet backhaul (point-to-point fiber links) is simpler for small deployments (5–50 subscribers) but requires more fiber pairs and amplification. UISP supports both—model cost per subscriber and fiber availability in your service area to decide.

Q: What PoE power budget should I allocate for UISP edge equipment?

Calculate total watts per access point or CPE (typically 15–30W per device), multiply by subscriber count at each aggregation point, then add 20% overhead for voltage drop and switching losses. Undersizing PoE supply causes intermittent outages during peak usage. UISP managed switches report per-port PoE draw via SNMP—monitor real-time consumption to validate your budget model.

Q: How do I ensure 99.99% uptime with UISP routers and switches?

Deploy redundancy at every layer: dual routers (active-standby or ECMP), dual switches in ring topology, and multiple WAN uplinks (ISP + backup). Use hot-standby power supplies and battery backup (UPS) at central sites. Enable SNMP and syslog alerts so your NOC detects failures in seconds. Redundancy only works if each component is tested under failure conditions—run regular failover drills.

Q: What transceivers and optics are compatible with UISP equipment?

UISP routers and switches use SFP (1GbE), SFP+ (10GbE), and XFP (10GbE) modules. Verify compatibility with your equipment's port type and wavelength (850nm multimode, 1310nm/1550nm single-mode). Purchase modules from the equipment vendor's qualified list to avoid signal degradation or incompatibility errors. Stock spares for critical links—optic failures are often cause of unexpected outages.

Q: Can I mix UISP equipment with other brands on the same network?

Yes, UISP routers and switches use standard protocols (BGP, OSPF, 802.1Q VLAN, SNMP) compatible with industry-standard gear. However, consistency in management, monitoring, and firmware update cycles is easier within a single vendor platform. If you must integrate third-party equipment, test inter-operability thoroughly—ensure matching MTU sizes, spanning tree settings, and QoS policies to avoid hidden failures.

Plan Your Deployment

Design subscriber density and bandwidth allocation per node
Plan tower or rooftop equipment for backhaul and last-mile delivery
Evaluate UISP management platform for subscriber provisioning

Showing Results for UISP Service Provider

Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-BOX

Ubiquiti UISP-BOX Outdoor Management Enclosure

Outdoor enclosure for UISP management controllers at the network edge
- Weatherproof housing protects equipment from rain, dust, and temperature swings
- Mounts on pole, wall, or mast with minimal hardware at 1.32 lb
- Integrates with Ubiquiti UISP software for distributed deployments
In stock · Ships same business day

$66.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-BOX-PLUS

Ubiquiti UISP-BOX-PLUS Weatherproof Management Enclosure

Weatherproof enclosure for outdoor UISP management hardware
- Protects sensitive electronics from rain, dust, and environmental contaminants
- Lightweight at 1.32 lbs for flexible pole and wall mounting without reinforcement
- Compact form factor fits distributed outdoor sites with space constraints
In stock · Ships same business day

$149.00 $107.99 Save $41.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-CABLE-CARRIER

Ubiquiti UISP-CABLE-CARRIER Industrial Ethernet Cable 1000 ft

1000 ft industrial Ethernet cable with 24 AWG for outdoor broadband
- 24 AWG conductors withstand installation stress and vibration better than consumer Cat5e
- Industrial ESD protection prevents transient voltage spikes in outdoor deployments
- UV and moisture-resistant jacket rated for outdoor conditions and PoE 802.3af/at/bt
In stock · Ships same business day

$253.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-CABLE-PRO

Ubiquiti UISP-CABLE-PRO UISP Management Device

1000ft cable spool for UISP backbone and long-distance runs
- 1000-foot length supports extended fiber or copper network deployments
- Cable spool form factor designed for UISP infrastructure installations
- Compatible with Ubiquiti UISP-series network components and frameworks
In stock · Ships same business day

$135.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-CONNECTOR-GND

Ubiquiti UISP-CONNECTOR-GND Grounding Wire Connector

Grounding connector for UISP tower and cabinet deployments with surge protection
- Earth bonding for outdoor installations to prevent lightning strike and surge damage
- Standardized UISP family interface eliminates custom fabrication and cross-sourcing
- Lightweight 0.85 lb form factor fits dense cabinet and pole-mount layouts
In stock · Ships same business day

$19.00 $15.99 Save $3.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-CONNECTOR-SHD

Ubiquiti UISP-CONNECTOR-SHD Shielded RJ45 Connector

Shielded RJ45 connector for UISP ecosystems with EMI protection
- Shielded design reduces electromagnetic interference in dense deployments
- Standard RJ45 form factor compatible with Cat5e, Cat6, and Cat6A cabling
- Indoor and outdoor rated for UISP management device installations
In stock · Ships same business day

$34.00 $22.99 Save $11.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-CONSOLE

Ubiquiti UISP-CONSOLE UISP Management Device

9-port gigabit managed switch for UISP network deployments
- 9 gigabit ports at 10/100/1000 Mbps for access and backhaul
- Web GUI, CLI, and SNMP management for remote configuration
- Compact 5.95 lb form factor for distributed PoP installations
In stock · Ships same business day

$387.75 $280.99 Save $106.76

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UISP-DISH

Ubiquiti UISP-DISH UISP Management Device

Centralized management hub for UISP wireless infrastructure deployments
- Multi-site management from single interface scales small to carrier-class networks
- Real-time visibility into device health, bandwidth, and network performance metrics
- Dish form factor with field-hardened construction for indoor and outdoor mounting
Special Order · Ships in 2-3 weeks

$178.99

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UISP-DISH-MINI

Ubiquiti UISP-DISH-MINI UISP Management Device

Centralized UISP management device for multi-site wireless networks
- Dish-integrated form factor aligns with Rocket Dish antenna family
- Lightweight 7.5 lb design for tower and rooftop installations
- Single-platform configuration and monitoring across distributed sites
Special Order · Ships in 2-3 weeks

$171.99

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UISP-FIBER-OLT-XGS

Ubiquiti UISP-FIBER-OLT-XGS UISP Management Device

8-port XGS-PON OLT with 100 Gbps aggregate uplink for fiber networks
- 10 Gbps per port across 8 XGS-PON ports for concurrent subscriber connections
- 100 Gbps aggregate uplink capacity for core network integration and backhaul
- 1U rack-mount form factor with native UISP management integration
Special Order · Ships in 2-3 weeks

$5,472.32 $2,707.99 Save $2,764.33

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UISP-FIBER-XG

Ubiquiti UISP-FIBER-XG UISP Management Device

10 Gbps fiber ONU with 24V PoE for GPON/XGS-PON networks
- 10 Gbps downstream / 2.5 Gbps upstream on single optical port
- 24V PoE powered—no separate power infrastructure required
- GPON and XGS-PON compatible for fiber-to-premises deployments
Special Order · Ships in 2-3 weeks

$132.99

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UISP-FIBER-XGS

Ubiquiti UISP-FIBER-XGS UISP Management Device

10 Gbps fiber OLT for UISP-managed FTTP network aggregation
- 10 Gbps symmetrical throughput with 1x XGS-PON + 1x 10GbE port
- Native UISP platform integration for centralized provisioning & monitoring
- Compact 0.49 lb form factor fits tight telecom cabinet deployments
Special Order · Ships in 2-3 weeks

$259.87 $184.99 Save $74.88

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-HORN

Ubiquiti UISP-HORN UISP Management Device

Centralized UISP management hub for distributed wireless ISP networks
- Native device provisioning and firmware deployment across airMAX ac/ad infrastructure
- Cloud-connected or on-premises operation with integrated billing and analytics
- Compact 14.2 lb form factor fits NOC, colocation, or regional deployment sites
In stock · Ships same business day

$189.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-P

Ubiquiti UISP-P Management Device

Centralized management appliance for hundreds of distributed UISP devices
- Bulk provisioning and firmware updates across hundreds of endpoints simultaneously
- REST API integration with existing billing, NOC, and provisioning platforms
- Active/passive and active/active HA modes with isolated management VLAN
In stock · Ships same business day

$451.80 $228.99 Save $222.81

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-P-PRO

Ubiquiti UISP-P-PRO Management Device

Centralized management for 50+ UISP Wired devices across sites
- Single interface for provisioning, configuration, and firmware deployment
- Real-time dashboards aggregate performance metrics and device status
- Automated onboarding workflows reduce day-one setup time at scale
In stock · Ships same business day

$499.00 $356.99 Save $142.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UISP-R

Ubiquiti UISP-R UISP Management Device

Centralized UISP management appliance with 8 Gigabit ports
- Eight Gigabit ports for direct connectivity to multiple network segments
- Desktop form factor weighing 3.1 lbs fits NOC and server room deployments
- PoE-powered operation simplifies integration into existing installations
In stock · Ships same business day

$124.99

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Subscriber Aggregation & Oversubscription

UISP service provider switches and routers support high-density subscriber connections with configurable oversubscription ratios. Plan your backhaul bandwidth carefully—core network bottlenecks occur when throughput is underprovisioned, and the same principle applies to ISP aggregation nodes.

PoE Budget & Power Distribution

Many UISP access points and edge devices run on PoE; verify total power consumption across your subscriber base. Proper PoE budget allocation prevents cascading failures, and service provider networks are no exception—underestimating power draw leads to brownouts during peak demand.

Redundancy & High-Availability Design

Service provider networks must maintain 99.99% uptime. UISP routers and switches support dual-boot images, hardware failover, and ring topologies. Network failures during critical events reveal hidden design flaws—build redundancy into switching fabric and WAN links from day one.

GPON Scalability & OLT Capacity Planning

UISP GPON OLTs aggregate subscribers per fiber pair; each splitter ratio (1:32, 1:64, 1:128) impacts per-customer bandwidth. Calculate total subscriber count, service mix (residential vs. business), and future growth—overloading an OLT port starves downstream subscribers of throughput.

Layer 2 & Layer 3 Switching Strategy

Determine whether your network requires edge L2 switching for VLAN isolation or core L3 routing for inter-region traffic engineering. Multi-site deployments benefit from consistent switching hierarchies—mixing managed and unmanaged equipment creates blind spots in traffic visibility.

Fiber Plant Integration & Module Selection

UISP equipment supports diverse transceiver types (SFP, SFP+, XFP). Verify module compatibility with your fiber plant (multimode vs. single-mode, distance, wavelength). Incorrect optics selection causes intermittent packet loss—plan module inventory and validation into your deployment timeline.

Technology Stack

The specs and acronyms that actually affect uisp service provider performance.

GPON (Gigabit Passive Optical Network)

Fiber-based access technology using passive optical splitters to serve multiple subscribers from a single fiber. OLT (Optical Line Terminal) at the headend communicates with ONUs (Optical Network Units) at subscriber premises. UISP GPON equipment scales FTTH deployments cost-effectively while maintaining per-customer QoS and security isolation.

Layer 3 BGP Routing & Multi-WAN Failover

UISP routers support dynamic border gateway protocol (BGP) route advertising and weighted equal-cost multi-path (ECMP) routing across multiple WAN links. Enables service providers to balance traffic, fail over to backup uplinks, and optimize peering agreements—critical for SLA compliance and subscriber experience.

802.3at/bt PoE & Power Over Ethernet Budget

UISP edge devices use 802.3at (30W) and 802.3bt (90W+) PoE for powering access points, CPEs, and field equipment. Aggregate PoE draw across access ports and trunk capacity to prevent power starvation. Managed UISP switches report per-port PoE consumption via SNMP for capacity tracking.

SFP/SFP+ Transceiver Optics & Wavelength

Small form-factor pluggable (SFP) modules support 1GbE; SFP+ supports 10GbE. Wavelengths (850nm multimode, 1310nm/1550nm single-mode) determine fiber type and distance. UISP platforms support hot-swappable optics—stock compatible modules per fiber plant to avoid deployment delays.

VLAN Tagging & Service Segmentation (802.1Q)

UISP switches perform 802.1Q VLAN tagging to isolate subscriber traffic, management VLANs, and multicast streams. Enables per-customer traffic steering, QoS enforcement, and security policy application at the switching plane—essential for multi-tenant service provider networks.

SNMP & NetFlow Monitoring for Capacity Planning

UISP routers and switches export SNMP counters (interface traffic, CPU, memory) and NetFlow records (per-flow statistics). Enables real-time visibility into link utilization, subscriber bandwidth consumption, and anomaly detection—data-driven planning prevents overload scenarios.

Typical Deployment Scenarios

Regional WISP with 500 Subscribers Across 3 Sites

Deploy UISP core router at hub site with dual WAN links; branch sites run UISP managed edge switches for local aggregation and PoE injection for access point clusters. Use fiber-to-copper media converters for last-mile hand-off to customer CPEs. BGP route redistribution ensures failover to backup ISP uplink.

FTTH Deployment: 2,000 Residential Subscribers, Single Fiber Ring

Install dual UISP GPON OLTs at central headend for redundancy; fan-out 1:64 passive splitters in neighborhood vaults. Each ONU (subscriber terminal) receives isolated VLAN; UPS-backed power supply at headend ensures OLT uptime. Monitor aggregate downstream/upstream traffic per splitter group to forecast density upgrades.

Multi-WAN Business ISP Edge Router with Carrier-Grade Availability

Deploy pair of UISP routers in active-standby or active-active configuration; connect to 3+ ISP uplinks + private MPLS link. Run BGP with AS-prepend and local-preference tuning to load-balance. Redundant power supplies and battery backup ensure continuous operation during utility failure. SNMP traps alert NOC to link failures in <5 seconds.

Backbone Ring for Regional Provider with 10+ PoPs

Link 10 UISP managed switches in physical ring topology; each PoP runs RSTP (Rapid Spanning Tree) or similar protection. Use SFP+ 10GbE optics on trunk ports for 10+ Gbps capacity per link. Network monitoring appliances track ring health; if backbone link fails, traffic reroutes within 100ms. Plan distributed power redundancy at each site.

Frequently Asked Questions

What is UISP and who should use it?

UISP (Ubiquiti Service Provider) is a platform of managed networking equipment designed for Internet service providers (ISPs), wireless service providers (WISPs), and large enterprise networks. It includes routers, switches, GPON access equipment, and monitoring software. Use UISP if you operate a multi-site network with high uptime requirements, need carrier-grade redundancy, or deploy FTTH/FTTB fiber services.

How do I choose between UISP GPON and traditional Ethernet backhaul?

GPON is cost-effective for large subscriber counts (100+) per fiber run, because passive splitters eliminate the need for active equipment at each subscriber. Ethernet backhaul (point-to-point fiber links) is simpler for small deployments (5–50 subscribers) but requires more fiber pairs and amplification. UISP supports both—model cost per subscriber and fiber availability in your service area to decide.

What PoE power budget should I allocate for UISP edge equipment?

Calculate total watts per access point or CPE (typically 15–30W per device), multiply by subscriber count at each aggregation point, then add 20% overhead for voltage drop and switching losses. Undersizing PoE supply causes intermittent outages during peak usage. UISP managed switches report per-port PoE draw via SNMP—monitor real-time consumption to validate your budget model.

How do I ensure 99.99% uptime with UISP routers and switches?

Deploy redundancy at every layer: dual routers (active-standby or ECMP), dual switches in ring topology, and multiple WAN uplinks (ISP + backup). Use hot-standby power supplies and battery backup (UPS) at central sites. Enable SNMP and syslog alerts so your NOC detects failures in seconds. Redundancy only works if each component is tested under failure conditions—run regular failover drills.

What transceivers and optics are compatible with UISP equipment?

UISP routers and switches use SFP (1GbE), SFP+ (10GbE), and XFP (10GbE) modules. Verify compatibility with your equipment's port type and wavelength (850nm multimode, 1310nm/1550nm single-mode). Purchase modules from the equipment vendor's qualified list to avoid signal degradation or incompatibility errors. Stock spares for critical links—optic failures are often cause of unexpected outages.

Can I mix UISP equipment with other brands on the same network?

Yes, UISP routers and switches use standard protocols (BGP, OSPF, 802.1Q VLAN, SNMP) compatible with industry-standard gear. However, consistency in management, monitoring, and firmware update cycles is easier within a single vendor platform. If you must integrate third-party equipment, test inter-operability thoroughly—ensure matching MTU sizes, spanning tree settings, and QoS policies to avoid hidden failures.

UISP Service Provider

Plan Your Deployment

Showing Results for UISP Service Provider

Ubiquiti UISP-BOX Outdoor Management Enclosure

Ubiquiti UISP-BOX-PLUS Weatherproof Management Enclosure

Ubiquiti UISP-CABLE-CARRIER Industrial Ethernet Cable 1000 ft

Ubiquiti UISP-CABLE-PRO UISP Management Device

Ubiquiti UISP-CONNECTOR-GND Grounding Wire Connector

Ubiquiti UISP-CONNECTOR-SHD Shielded RJ45 Connector

Ubiquiti UISP-CONSOLE UISP Management Device

Ubiquiti UISP-DISH UISP Management Device

Ubiquiti UISP-DISH-MINI UISP Management Device

Ubiquiti UISP-FIBER-OLT-XGS UISP Management Device

Ubiquiti UISP-FIBER-XG UISP Management Device

Ubiquiti UISP-FIBER-XGS UISP Management Device

Ubiquiti UISP-HORN UISP Management Device

Ubiquiti UISP-P Management Device

Ubiquiti UISP-P-PRO Management Device

Ubiquiti UISP-R UISP Management Device

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for UISP Service Provider

Frequently Asked Questions

Related Categories

Engineering Reading