Sensors & IoT
Showing Results for Sensors & IoT
-
Ubiquiti
SKU: USL-GATEWAY
Ubiquiti USL-GATEWAY Router/Gateway
PoE-powered UniFi sensor gateway for distributed network deployments
- 802.3af PoE at 3.4W max — single cable delivers power and 10/100 Mbps uplink.
- Bluetooth 5.2 (100m) and SuperLink (2km) aggregate edge sensors under UniFi Protect.
- NDAA-compliant; DIN rail or wall mount fits 159.3×81.9mm footprint in any enclosure.
$129.00 $128.99 Save $0.01The item has been added -
ACTi
SKU: NAS-10PBW
ACTi NAS-10PBW Network Surveillance Component
- Designed as network storage purpose-built for ACTi professional surveillance systems.
- Integrates with ACTi NVR platforms following standardized system architecture practices.
- Supports professional installation workflows requiring dedicated on-site storage components.
$2,000.00 $1,367.99 Save $632.01The item has been added -
ACTi
SKU: NAS-SWT
ACTI Nas-Swt
- Designed as a network storage unit purpose-built for ACTi surveillance deployments.
- Integrates with compatible ACTi systems to centralize video and security data storage.
- Network-attached architecture supports structured cabling and standard rack installation.
$175.00 $122.99 Save $52.01The item has been added -
ACTi
SKU: NAS-10CAT
ACTi Nuisance Alert System Catalytic Converter - NAS-10CAT
- Wireless detection module alerts immediately when a protected asset is disturbed.
- Battery-powered design enables flexible field placement on vehicles and pallets.
- Pairs with a central control panel to consolidate site-wide events for reporting.
$2,500.00 $1,836.99 Save $663.01The item has been added -
ACTi
SKU: NAS-10CAT-BAT
ACTi Nuisance Alert System Catalytic Converter - NAS-10CAT-BAT
- Mounts directly to catalytic converter to detect tampering before theft occurs.
- Triggers real-time alerts that correlate with ACTi VMS footage and event timestamps.
- Deploys in fleet yards, dealership lots, and outdoor asset areas with high theft risk.
$2,999.00 $2,485.99 Save $513.01The item has been added -
ACTi
SKU: NAS-CAT-BAT
ACTi Nuisance Alert System Catalytic Converter - NAS-CAT-BAT
- Purpose-built algorithms detect jacking, crawling, and cutting tool movements.
- Delivers real-time alerts via push notification, email, and VMS integration.
- Leverages existing ACTi camera infrastructure—no dedicated hardware required.
$275.00 $247.99 Save $27.01The item has been added -
ACTi
SKU: NAS-CAT
ACTi Nuisance Alert System Catalytic Converter Guard - NAS-CAT
- Detects under-vehicle tampering in real time, triggering alerts before theft completes.
- Integrates with ACTi NVR platforms and third-party VMS over existing IP network infrastructure.
- Logs events to network storage, generating documentation suitable for insurance claims.
$225.00 $183.99 Save $41.01The item has been added -
ACTi
SKU: NAS-10EBT
ACTi Nuisance Alert System Employee Badge - NAS-10EBT
- Wearable badge gives roaming staff on-body alert activation from any facility location.
- Eliminates dependency on fixed panic buttons for floor managers and security personnel.
- Integrates with ACTi nuisance alert system controllers; verify model compatibility before deploy.
$1,750.00 $1,119.99 Save $630.01The item has been added -
ACTi
SKU: NAS-EBT
ACTi Nuisance Alert System Employee Badge Transmitter - NAS-EBT
- One-touch activation triggers immediate NAS receiver alerts and VMS recording workflows.
- Unique transmitter ID pinpoints which staff member initiated the alert for precise dispatch.
- Wireless, wearable form factor supports full facility mobility with no cabling required.
$175.00 $122.99 Save $52.01The item has been added -
ACTi
SKU: NAS-PBW
ACTi Nuisance Alert System Push Button Transmitter - NAS-PBW
- Wireless battery-powered transmitter eliminates wiring runs on vehicles and pallets.
- Long-range RF link maintains connectivity across typical outdoor scrap yards and lots.
- Pairs with a central control panel to consolidate site-wide alerts for police reports.
$200.00 $136.99 Save $63.01The item has been added -
ACTi
SKU: NAS-10SWT
ACTi Nuisance Alert System Wearable Wrist - NAS-10SWT
- Wrist-mounted form factor keeps alerts on the operator without desk hardware.
- Silent alerting reduces audible fatigue while maintaining incident responsiveness.
- Pairs to ACTi NAS infrastructure via management interface—no manual provisioning.
$1,750.00 $1,119.99 Save $630.01The item has been added -
Add to Cart The item has been added
Axis
SKU: 03037-001
Axis D3110 Mk II Connectivity Hub - 03037-001
Rack-mount hub bridges analog sensors and audio into networked surveillance
- 8 supervised I/O channels detect faults and trigger alerts on door/motion events
- Built-in glass break, shouting, and alarm detection via AXIS Audio Analytics
- 2 audio inputs + 1 output with VAPIX, MQTT, and SIP protocol support
In stock · Ships same business day$489.00 $473.99 Save $15.01The item has been added -
Axis
SKU: 03069-001
Axis D6210 Air Quality Sensor - 03069-001
Inline air quality sensor for Axis cameras; TVOC, PM2.5, PM10, vaping detection
- Integrates via Portcast passthrough—no separate power or network ports needed
- Detects TVOC, PM2.5, PM10 particulates, and smoking/vaping in real time
- Triggers threshold-based alerts on Axis network cameras and strobe sirens
$429.00 $415.99 Save $13.01The item has been added -
Axis
SKU: 03202-001
Axis D6310 Indoor Air Quality Sensor - 03202-001
Indoor air quality sensor with smoking/vaping detection and real-time alerts
- Monitors PM, VOC, NOx, CO₂, temperature, humidity with IP network integration
- Detects smoking and vaping activity for policy enforcement without video surveillance
- PoE+ powered standalone sensor with two-way communication and visual alerts
$1,049.00 $1,017.99 Save $31.01The item has been added -
DMP
SKU: 1107
DMP 1107 Micro Window Transmitter
- Micro form factor fits narrow window frames where standard magnetic contacts cannot mount.
- 345 MHz wireless operation eliminates home-run wiring to perimeter windows and glass doors.
- Supervised DMP 1100 Series protocol alerts the XR panel on signal loss or tamper events.
$595.00 $458.99 Save $136.01The item has been added -
DMP
SKU: 1108
DMP 1108 Doorbell Module
Multi-door intercom module supporting up to 8 doors with wireless and wired
- Consolidates up to 8 door inputs into one wireless transmitter, cutting hardware count.
- 900 MHz FCC Part 15-certified radio eliminates dedicated annunciation cable runs.
- Accepts mechanical pushbutton and video doorbell inputs with no signal conditioning needed.
$53.00 $28.99 Save $24.01The item has been added
Sensors & IoT
Environmental sensors, I/O controllers, and IoT devices for monitoring temperature, humidity, door state, water detection, and other site conditions. IP-connected sensors integrate with VMS and BMS platforms for automated alerting.
Plan Your Deployment
- Define sensor types needed per monitoring zone
- Confirm IP connectivity and PoE availability at sensor locations
- Evaluate SNMP, MQTT, or API integration with your management platform
Sensors & IoT — Engineering-Grade Network Infrastructure for Commercial Deployments
This category covers 111 working models of sensors & iot sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Port count and PoE budget come first. An 8-camera install needs at least 9 ports (cameras + uplink), with PoE budget covering the sum of per-camera PoE class. Account for uplink speed: 1 Gbps uplinks bottleneck under heavy video load on switches with 8+ high-resolution cameras. SFP+ or 10 Gbps uplinks remove that bottleneck on growing sites.
Managed versus unmanaged switches affect troubleshooting and VLAN segmentation. Managed switches (HPE Aruba, Cisco, Netgear ProSAFE M-series) support VLANs, link-aggregation, port mirroring, and SNMP monitoring — essential for any deployment over 16 cameras or with mixed traffic. Unmanaged switches work for small isolated camera networks but limit growth and troubleshooting visibility.
Layer 3 capability (routing, VLAN inter-VLAN routing) becomes important when surveillance, access control, and corporate traffic share the same physical network. Surveillance VLAN isolation is now standard practice — segregate camera traffic from corporate Wi-Fi and guest networks to prevent broadcast storms and lateral attack paths. Confirm the switch supports the VLAN count and ACL complexity you need.
Outdoor/industrial deployments need ruggedized switches. ComNet, Antaira, and Moxa make hardened switches rated for -40°C to +75°C, vibration, and waterproof housings. DIN-rail mounting fits standard outdoor enclosures. Standard data-closet switches in outdoor enclosures fail within 1-2 years from condensation and temperature swings; spec the right environment rating up front.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, Thermal |
| IP Rating | IP66, IPX5, IP56, IP65 |
| Connectivity | Wired |
| Power | AC/DC, Battery, ON, PoE, 9VDC via alkaline battery @ 40µA (resting) |
| Type | Security Device, Accessory, Motion Sensor, Beam Sensor, Laser Sensor, Vehicle Sensor, Access Point, Switch |
| Durability | Indoor |
Top Brands in This Category
Frequently Asked Questions
What's the difference between managed and unmanaged PoE switches?
Unmanaged switches power-on and forward traffic without configuration — simplest deployment but no VLAN, no monitoring, no troubleshooting visibility. Managed switches add VLANs, link-aggregation, port mirroring, SNMP, and remote-management interfaces. For deployments above 16 cameras or those sharing infrastructure with other systems, managed is the right choice; the per-port cost is modest and the operational benefit is large.
How much PoE budget should I size for?
Sum the PoE-class budget of all PoE-powered devices, then add 20-30% headroom for growth. Eight 802.3at cameras at 30W max each is 240W minimum — but a 130W-budget 8-port PoE+ switch can't deliver that. Confirm both per-port budget and total PoE budget; many entry-level switches advertise PoE+ ports but cap aggregate budget at half the per-port maximum.
Do I need 10 Gbps uplinks?
For installations under 32 cameras with mid-resolution streams, 1 Gbps uplinks suffice. Above that, or when you need fast investigative playback for many simultaneous reviewers, 10 Gbps (SFP+) uplinks remove the choke point. NVRs writing to NAS over the network also benefit. SFP+ has become reasonably affordable on managed switches; opt for it on new installs over 16 cameras.
Can I run VoIP and video on the same switch?
Yes — modern managed switches use VLAN segregation to keep VoIP, video, and data traffic separated even on shared physical ports. Use QoS (Quality of Service) to prioritize VoIP for low latency and assign video its own queue. Avoid mixing untagged traffic types on a single switch port without VLAN configuration; broadcast storms and bandwidth competition cause both voice and video quality issues.
What's the right uplink between buildings on a campus?
Single-mode fiber for runs over 100 m, multi-mode for shorter runs (typically up to 550 m on OM3, 300 m on OM4 at 10 Gbps). Bidirectional SFPs (single fiber instead of pair) save fiber count when the run is already deployed. Avoid copper between buildings — ground-potential differences during lightning strikes destroy switch SFP modules even when surge-protected.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.