Proximity & Card Readers
Showing Results for Proximity & Card Readers
-
Camden
SKU: CV-WTX4H-H26
Camden CV-WTX4H-H26 Four Channel Wiegand Proximity Reader
Four-channel proximity reader for multi-door access control systems
- Four independent channels support simultaneous multi-door deployment
- OSDP and Wiegand protocols integrate with existing access control systems
- Reads HID 125kHz proximity credentials at 16VDC operation
$53.00 $32.99 Save $20.01The item has been added -
Camden
SKU: CV-WTX4H-H26SE
Camden CV-WTX4H-H26SE Four-Channel Wiegand Proximity Reader
Four-channel proximity reader for Wiegand and OSDP access control
- Reads 125kHz HID proximity cards and HID iCLASS SE smart cards
- Dual protocol output via Wiegand and OSDP for system integration
- Operates at 16VDC for standard power infrastructure compatibility
$57.00 $34.99 Save $22.01The item has been added -
Comelit
SKU: 909020110
Comelit 909020110 GS3-LF Mullion Proximity Reader
Mullion proximity reader with 4MP and PoE+ for access control
- 2560×1440 (4MP) capture supports forensic review and cardholder verification at the door.
- PoE+ (802.3at) delivers power and data over one cable, eliminating dedicated electrical runs.
- Mullion mount form factor fits tight door-frame geometry where face-mount readers won't clear hardware.
$232.27 $158.99 Save $73.28The item has been added -
Comelit
SKU: 909020111
Comelit 909020111 GS3-LF Proximity Reader
Proximity reader with 4MP video capture and PoE+ power
- 4MP (2560×1440) onboard capture ties visual identity to each RFID access event.
- PoE+ (802.3at) delivers power and data over one cable, eliminating 24V DC runs.
- IP65-rated polycarbonate housing supports sheltered outdoor and wash-down installs.
$232.27 $158.99 Save $73.28The item has been added -
Comelit
SKU: 909020112
Comelit 909020112 GS3-MT Mullion Proximity Reader
Mullion proximity reader with 4MP imaging and PoE+ power
- 4MP (2560×1440) sensor captures cardholder identity at credential presentation for audit trails.
- PoE+ (802.3at) powers the reader over a single Ethernet run—no dedicated 12V door wiring needed.
- Reads PAC RFID, PAC OPS™, KeyPAC, and 125 kHz LF/HF cards via one Wiegand interface.
$257.81 $175.99 Save $81.82The item has been added -
Comelit
SKU: 909020113
Comelit 909020113 GS3-MT Standard Proximity Reader
PoE+ proximity reader with 4MP for IP-based access control
- Handles PAC OPS™, KeyPAC, and third-party Wiegand credentials on a single reader.
- PoE (802.3af) consolidates power and data on one cable run; verify 13W minimum per port.
- IP65-rated polycarbonate housing supports indoor and outdoor deployments without covers.
$257.81 $175.99 Save $81.82The item has been added -
Comelit
SKU: 909020114
Comelit 909020114 GS3-MT Proximity Reader
PoE+ proximity reader with PIN entry for mixed-credential access control
- PoE+ (802.3at) power runs over Cat5e/Cat6, eliminating separate 12V supplies.
- PIN keypad plus proximity card in one unit standardizes hardware across mixed-credential sites.
- IP65-rated UL polycarbonate housing supports protected exterior and vestibule installs.
$403.68 $274.99 Save $128.69The item has been added -
Comelit
SKU: 909020116
Comelit 909020116 GS3-LF Vandal Resistant Proximity Reader
Vandal-resistant proximity reader with 4MP and PoE+ for secure access
- Grade 304 stainless steel with IP67 rating handles outdoor and wet environments.
- PoE+ (802.3at) at 15.4W eliminates separate power runs; single Cat6 cable suffices.
- Red/green LED indicators and audible sounder provide immediate credential feedback.
$355.38 $241.99 Save $113.39The item has been added -
Comelit
SKU: 909021017/2.00
Comelit 909021017/2.00 Keypac Proximity Card Reader
- Proximity card reader for Comelit Keypac access control
- Sub-second prox credential read at high-traffic access points
- Native Comelit Software 6 management platform integration
$66.78 $45.99 Save $20.79The item has been added -
DMP
SKU: 1301I
DMP 1301I USB Computer iClass Reader
USB iClass reader for desktop access control integration
- USB interface connects directly to workstations with no additional hardware required.
- Reads HID iClass credentials, enabling desktop-level identity verification at any PC.
- Desktop mount form factor suits reception desks and security checkpoints for fast deploy.
$705.00 $356.99 Save $348.01The item has been added -
DMP
SKU: 1301M
DMP 1301M USB MIFARE Prox Reader
USB MIFARE proximity reader for Windows access control, no network required
- USB connection removes network infrastructure requirements, simplifying multi-door deployments.
- Reads MIFARE proximity cards and tags, compatible with widely supported access control platforms.
- Plug-and-play USB enumeration enables rapid installation without additional software configuration.
$606.00 $297.99 Save $308.01The item has been added -
DMP
SKU: 1301N
DMP 1301N USB Computer Proximity Reader
USB proximity reader for desktop access control integration
- USB HID interface eliminates separate power runs and secondary wiring at the workstation.
- Reads standard proximity cards for contactless credential capture at desktop terminals.
- Desktop mount form factor integrates into existing workstations with no dedicated hardware.
$593.00 $299.99 Save $293.01The item has been added -
DMP
SKU: 1301P
DMP 1301P USB Computer Proximity Reader
USB proximity reader for desktop/workstation access control integration
- USB interface connects directly to workstations, eliminating external access control panels.
- Reads standard proximity card credentials for logical and physical access authentication.
- Compact desktop form factor supports plug-and-play deployment on existing workstations.
$580.00 $293.99 Save $286.01The item has been added -
DMP
SKU: 7463-W
DMP 7463-W Network Thinline LCD Keypad with Prox Reader
Network LCD keypad with dual PIN and proximity card access
- Network communication eliminates dedicated wiring runs, simplifying multi-keypad deployments.
- Integrated proximity reader supports dual-credential (PIN + prox card) access from one device.
- Built-in 4-hour backup battery maintains operation during AC loss without an external enclosure.
$452.00 $228.99 Save $223.01The item has been added -
DMP
SKU: P-500-H-A
DMP P-500-H-A Alps Proximity Reader
TCP/IP proximity card reader for distributed door-level access control
- 8-inch read range handles high-traffic turnstiles without precise card positioning.
- 5–16V input tolerance integrates with existing DMP keypads and control nodes.
- Metal-surface mounting maintains full read range on steel door frames and enclosures.
$334.47 $158.99 Save $175.48The item has been added -
DMP
SKU: P-640-H-A
DMP P-640-H-A Patagonia Proximity Reader with Keypad
Dual-credential proximity and keypad reader for DMP access control
- Accepts proximity cards, proximity tags, and PIN codes for flexible credential deployment.
- Wired connection to DMP panels enables real-time credential verification without network dependency.
- Single faceplate houses both 125 kHz proximity reader and keypad, simplifying door hardware.
$627.91 $298.99 Save $328.92The item has been added
Proximity & Card Readers
Proximity and card readers authenticate users at doors using credential-based access control. Select readers that match your credential format, security level, and installation environment to support consistent, scalable commercial deployments.
Plan Your Deployment
- Credential compatibility (frequency, format, encryption level)
- Indoor vs outdoor installation and vandal resistance
- Mounting type and door-side placement requirements
- Controller interface and wiring compatibility
- Standardization across facilities and sites
Proximity & Card Readers — Engineering-Grade Credential Reading for Commercial Deployments
This category covers 117 working models of proximity & card readers sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Credential technology drives reader choice. Legacy 125 kHz prox is easy to clone with off-the-shelf tools and should be retired wherever security matters. 13.56 MHz contactless (HID iCLASS Seos, Mifare DESFire EV2/EV3) uses encrypted mutual authentication and is the current standard. Multi-format readers buy migration flexibility but cost more per door and consume more current.
Form factor and mounting decide installation cost and aesthetic fit. Mullion-mount readers fit narrow door frames; wall-mount readers offer larger antennas and longer read range. Indoor versus outdoor (IP65/IP67) ratings drive housing choice. Backlit keypads, LED indicators, and audible beep volume affect usability — operator complaints almost always trace back to ergonomics, not the controller logic upstream.
OSDP support is now baseline for any new reader purchase. OSDP brings encrypted communication, tamper detection, and over-the-wire firmware updates. SIA OSDP Verified compliance (and OSDP Secure Channel) signals interoperability with controllers across vendors. Wiegand-only readers should be reserved for retrofit-only situations where pulling new cable isn't feasible.
Biometric and facial recognition readers add convenience but introduce template management, lighting requirements, and accuracy/false-rejection tradeoffs. Plan enrollment workflow, GDPR/BIPA compliance for stored biometric templates, and lighting upgrades at the reader site. Hybrid readers — credential + biometric — are common for compliance-sensitive environments where two-factor at the door is required.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 8MP |
| IP Rating | IP67, IP66 |
| Connectivity | Wired, Bluetooth, OSDP (Open Supervised Device Protocol) |
| Power | AC/DC, PoE, 100 mA (12 VDC) |
| Type | Reader, Access Card, Accessory, Controller, Printer, Intercom, Camera, Cable |
| Durability | Outdoor, Indoor, Indoor/Outdoor |
Top Brands in This Category
Frequently Asked Questions
How far away can a credential be read?
13.56 MHz contactless reads at 2-4 inches with standard antennas. Long-range UHF readers (433 MHz, 900 MHz) read at 5-30 feet and are common in parking, vehicle ingress, and hands-free entry applications. The tradeoff is security — longer-range reads create larger opportunities for relay attacks. Match read range to the use case and confirm reader-credential pairing before mass-issuing credentials.
Can I read multiple credential types on one reader?
Multi-format readers (HID multiCLASS SE, ASSA OSDP multi-tech) support 125 kHz, 13.56 MHz, and mobile credentials simultaneously. They cost roughly 30-50% more than single-format readers but eliminate the credential-migration cliff. For organizations issuing mobile credentials alongside cards or transitioning from legacy prox, multi-format is almost always the right choice.
What's the difference between iCLASS Seos and Mifare DESFire?
Both are encrypted 13.56 MHz contactless standards used in modern access control. HID iCLASS Seos is HID's proprietary platform — broad reader ecosystem, mobile credential support via HID Mobile Access. Mifare DESFire EV2/EV3 is an open NXP standard used by many independent vendors and transit systems. Choose based on which controller/reader ecosystem you've committed to; performance is comparable.
How long do credentials last?
Physical cards last 5-7 years under normal pocket-and-purse use. Key fobs typically last longer, 7-10 years. Battery-powered active credentials (UHF tags) are limited by battery life, often 3-5 years. Mobile credentials don't have physical wear but require active phone OS support. Build credential replacement into annual budget; lost-card replacement runs $5-25 per card depending on technology.
Are biometric readers reliable enough for primary entry?
Modern fingerprint and facial recognition readers achieve very low false-reject rates (under 1% with good enrollment) and false-accept rates well below 1 in 100,000. They're reliable enough for primary entry in most commercial applications, with two important caveats: lighting and angle requirements for facial readers are strict, and a small minority of users have fingerprints that don't enroll reliably. Always pair biometrics with a credential fallback path.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.