HID 40TKS-00-000000 SIGNO 40 Wiegand Access Control Reader
Overview
The HID 40TKS-00-000000 is a surface-mounted access control reader designed to integrate with legacy and modern systems that accept Wiegand protocol data. This reader outputs 32-bit MSB format Wiegand, the de facto standard for access control panels across North America—meaning it will integrate directly into most existing installations without protocol translation or middleware. The unit ships with a black/silver finish and supports standard proximity card credentials in EM-compatible 32-bit format. Terminal connectivity simplifies hardwire installation; no proprietary connectors to source separately.
Key Features
- Wiegand 32-bit MSB Output: Eliminates the need for protocol converters or gateway hardware when deploying into systems expecting standard Wiegand data streams. This reduces bill-of-materials cost and avoids a potential single point of failure in the credential path.
- EM-Compatible 32-bit Card Format Support: Accepts proximity credentials from major manufacturers in the standard EM 4100/4102 library. You can re-use existing badge stock without reprogramming, a significant advantage during phased deployments or migrations.
- Red LED Status Indication: Visual feedback for reader state. Allows technicians to verify hardware responsiveness during commissioning without requiring a connected controller or diagnostic software.
- Green Flash Feedback: Brief green light pulse when a valid credential is read. Provides immediate confirmation to the cardholder that the credential registered, reducing frustration from unclear access outcomes.
- Integrated Buzzer: Audible beep on credential read. Acts as a secondary confirmation cue, especially valuable in high-noise environments or when visual feedback is obscured by mounting position or glare.
- Surface-Mount Form Factor: Installs flush to wall or pillar using standard card reader profile dimensions. Requires minimal rough-in work; no specialized cutouts or recessed mounting boxes reduce installation time and labor.
- Terminal Connectivity: Screw-terminal or plug-style connections eliminate proprietary wiring harnesses. Terminal wiring uses standard low-voltage security practices, reducing dependency on specialty technicians.
- MA-Ready Designation: Certified for compatibility with standard mounting and architectural integration workflows. Ensures installation support from mounting hardware distributors and reduces spec conflicts during project planning.
Integration & Compatibility
The 40TKS-00-000000 integrates directly into any access control system with a Wiegand reader port. This includes legacy access control panels from the 1990s onward, as well as modern IP-based systems that include Wiegand modules. IPM (Input Port Module) and velocity sensing are disabled in this SKU, so configurations requiring anti-tailgating logic or multi-reader synchronization should evaluate other SIGNO 40 variants or integrate a secondary velocity detector.
Standard mounting profiles and terminal-based connectivity mean installation integrates with existing site practices. No special power conditioning or isolation transformers required—run 12VDC or higher from a standard power supply.
Frequently Asked Questions
Q: Is the HID 40TKS-00-000000 compatible with my existing access control panel?
A: If your panel includes a Wiegand reader input port, yes. The 40TKS-00-000000 outputs standard 32-bit MSB Wiegand format, the industry default since the 1980s. Older panels (1990s–2000s) and modern systems both support this protocol natively. Check your panel manual for Wiegand reader specifications to confirm.
Q: Can I use my existing EM-format proximity cards with the 40TKS-00-000000?
A: Yes. The reader supports EM-compatible 32-bit credentials (EM 4100/4102 standard library). No reprogramming or new badge procurement needed if you are migrating from another EM-compatible reader.
Q: What power supply does the 40TKS-00-000000 require?
A: Standard 12VDC 500mA power is typical for this reader. Verify your panel or external power supply can deliver 12VDC; terminal wiring runs directly from the power source. No PoE or special conditioning required.
Q: Does the 40TKS-00-000000 include anti-tailgating or velocity sensing?
A: No. IPM and velocity sensing are disabled in this 40TKS configuration. If your deployment requires tailgate detection, explore other SIGNO 40 SKUs or add a dedicated velocity sensor downstream.
Q: What finish options are available for the 40TKS-00-000000?
A: This model ships in black/silver only. If aesthetics require a different finish, check the broader SIGNO 40 line for color or material variants.
Q: Can the 40TKS-00-000000 be surface-mounted on any door frame?
A: Yes, it uses standard card reader mounting profiles. Install on any metal or plastic frame using the mounting template and standard fasteners. No recessed cavity required.
Jerry TildsenPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The HID 40TKS-00-000000 (often searched as 40TKS 00 000000) is a straightforward Wiegand reader—nothing fancy, and that's the point. It outputs 32-bit MSB Wiegand, which means it works in almost every existing access control system built in the last 30 years without protocol conversion or middleware. That simplicity cuts integration risk and cost.
Technical Highlights:
- 32-bit MSB Wiegand Output: Direct compatibility with legacy and modern panels. No translator hardware required—run terminal wires from the reader directly to the panel's Wiegand input. Reduces BoM and eliminates a potential fault point in the credential chain.
- EM 4100/4102 Card Format: Accepts standard proximity credentials already in use across most North American installations. Phased badge migration becomes optional; you can deploy readers and continue using existing card stock.
- LED + Buzzer Feedback: Red status indication and green flash on valid read keep field techs and end users in the loop without requiring a connected controller. Audible beep adds a second confirmation cue in noisy or visually obstructed areas.
- Surface Mount, Standard Profile: No recessed cutout needed. Installs on pillar, wall, or door frame using off-the-shelf mounting hardware and the included template. Labor-efficient for retrofit or new build.
Deployment Considerations:
- IPM and velocity sensing are disabled—this SKU does not include tailgate or double-entry detection. If your spec calls for anti-tailgating, verify a SIGNO 40 variant with IPM or plan a secondary velocity detector.
- 12VDC power is standard for this reader. Confirm your power supply or panel aux output can deliver the current; check terminal polarity and voltage before committing wires to the reader to avoid field callback.
The 40TKS-00-000000 is the right choice for retrofits, expansions, and deployments where existing panel infrastructure is already Wiegand-equipped and card format migration is not a driver. Avoid it if your project requires integrated anti-tailgating, IP67 environmental hardening, or non-standard credential formats.
