Axis · 02474-001

Axis TU9001 USB Control Board - 02474-001

USB-powered control board for AXIS Camera Station Windows deployments

• Single USB 2.0 connection provides power and data—no separate supply needed
• Compatible with Windows 7, 8, 10, and 11 for mixed-generation environments
• Compact 186 × 312 mm footprint fits tight control room and NOC setups

Axis · 01962-001

Axis TA8501 Physical Tampering Switch - 01962-001

Dedicated mechanical switch for tamper detection without false alerts

• Mechanical switch design eliminates accelerometer false positives on door stations
• Compatible with AXIS A8105-E door station and AXIS A9801 security relay
• Tool-free installation for commercial entry points and access control systems

ELK Products · ELK-0650

ELK Products ELK-0650 ELK Security Accessory

6V 5Ah backup battery for ELK security panels during power loss

• 6V 5Ah auxiliary backup battery for ELK control panels
• 20-hour discharge rate supports moderate alarm and aux loads
• 1.82 lb compact form factor fits standard ELK enclosures

Honeywell · L7000

Honeywell L7000 LYNX Touch Wireless Alarm Control Panel

Wi-Fi handheld 2D scanner with 7" touchscreen for warehouse ops

• 2D scan engine reads both 1D and 2D barcodes in a single pass, reducing device count.
• Built-in Wi-Fi enables real-time WMS data sync, eliminating batch-upload workflows.
• 7-inch color touchscreen supports intuitive operator navigation in warehouse lighting.

Inovonics · EN4000

Inovonics EN4000 EchoStream Universal Serial Receiver 902-928 MHz

Universal serial receiver for 902-928 MHz wireless systems

• Universal serial receiver feeds EchoStream wireless data to any host
• 902-928 MHz ISM band penetrates drywall, concrete, and glass partitions
• Serial integration for legacy panels, automation, and SCADA gateways

Camden · CX-247H-12

Camden 7 day timer with first-man-in function - 12 - CX-247H-12

• First-man-in relay holds the door locked until authorized entry, eliminating holiday reprogramming.
• 16 on/off events across 15 daily/weekly slots cover shift changes and multi-site operating calendars.
• 30VDC @ 16A output drives electrified locks, magnetic strikes, and automatic door operators directly.

Camden · CX-1000/74

Camden CX-1000/74 Electric Strike Lock

Network electric strike, 24VDC fail-secure, TCP/IP control

• TCP/IP integration for centralized access control across multiple doors
• Fail-secure locking mode holds strike in locked position during power loss
• 24VDC operation with wall, ceiling, or pole mount for flexible installation

Camden · CX-1000/77

Camden CX-1000/77 Electric Strike

• Fail-secure 24VDC design keeps door locked on power loss or panel fault.
• SPDT relay input requires no firmware, VMS, or network integration to deploy.

Camden · CX-1085M

Camden CX-1085M Pneumatic Timer for Push Buttons

Pneumatic timer for push-button door control with TCP/IP integration

• Time-delay control for electromagnetic locks and strike mechanisms
• TCP/IP networked integration with access control systems
• Works in new installations and retrofit applications, –4°F to 120°F

Camden · CX-247-12

Camden CX-247-12 7-Day Timer Lock Strike

• TCP/IP communication enables remote schedule management from any networked control station.
• 7-day programmable schedule supports per-day unlock windows without hardware reconfiguration.
• 12V DC operation integrates directly with existing low-voltage access control power supplies.

Camden · CX-247-24

Camden CX-247-24 7-Day Timer Lock Strike

• 15 independent 7-day schedules with 16 on/off events each eliminate server dependency.
• 20A relay contacts at 30VDC handle dual mag-locks or high-inrush door operators reliably.
• Battery-backed memory preserves all schedules through power loss; no re-programming needed.

Camden · CM-CPC1

Camden Vandal and weather resistant clear lift cover

Clear lift cover for outdoor keypad readers with vandal protection

• Transparent design maintains keypad visibility while blocking weather and impact
• Wall-mounted TCP/IP keypad cover compatible with HID credential systems
• Outdoor-rated construction protects access points in high-traffic entry areas

Camden · CM-CPC1-F

Camden Vandal and weather resistant clear lift cover - CM-CPC1-F

• Polycarbonate lift cover shields outdoor keypads from rain, dust, and impact.
• Outdoor-rated enclosure suits unsheltered perimeter and wall-mount flush installations.
• Hinged design allows quick field maintenance without full disassembly; 3-year warranty.

DMP · 263EXT

DMP 263EXT Cellular Extension Module

Cellular expansion module for DMP systems without landline or broadband

• Adds cellular communication to compatible DMP control panels where landline or broadband is unavailable.
• Supports primary or backup cellular path, reducing single-point-of-failure risk at remote sites.
• Integrates within the DMP ecosystem, simplifying procurement and support for existing deployments.

DMP · 270

DMP 270 Network Transient Suppressor

TCP/IP network transient suppressor for cell communicators

• Suppresses TCP/IP ethernet transients to prevent panel resets in multi-building runs.
• Inline, passive installation requires no external power supply or active components.
• Certified UL 294, UL 864, UL 1610, ULC-S304, and additional UL/ULC listings.

DMP · 271

DMP 271 Ground Fault Detection Module

Ground fault detection module for DMP fire alarm systems

• Monitors field wiring against earth ground to catch faults invisible to standard zone supervision.
• Triggers a supervisory zone output so panels annunciate ground faults without raising a fire alarm.
• Supports NFPA 72 and AHJ ground fault annunciation mandates for commercial fire alarm deployments.

DMP · 341

DMP 341 Panel Enclosure

TCP/IP panel enclosure for retrofit and new security installations

• Pre-drilled mounting holes secure DMP XT/XR Series panels and transformers without custom work.
• Dual knockout ports in .75" or .5" sizes provide flexible conduit and cable entry routing.
• Gray powder-coat steel construction resists corrosion for reliable indoor wall-mount deployments.

DMP · 341B

DMP 341B Battery Bracket with 318T Battery Harness

Battery bracket with pre-terminated 318T harness for DMP control panels

• Pre-terminated 318T harness plugs directly into DMP panel, eliminating field wiring.
• Rigid bracket prevents battery movement and connector fatigue inside the enclosure.
• Fits standard control panel housings; no adapter plates or modifications required.

DMP · 349

DMP 349 Panel Enclosure

Metal panel enclosure for DMP control systems and access control

• Fits two 7.7 Ah backup batteries to maintain uptime during brief power outages.
• Keyed lock prevents unauthorized access to mounted control electronics.
• Dual-size knockouts enable flexible cable routing without pre-drilling.

DMP · 349A-G

DMP 349A-G Attack Panel Enclosure

TCP/IP attack panel enclosure for networked DMP security systems

• 16-gauge rolled steel door resists forced entry in high-risk control areas.
• Integral tamper switches detect enclosure breach and trigger immediate alerts.
• Dual-size cable knockouts support flexible conduit routing for panel wiring.

DMP · 350B

DMP 350B Slide-In Bracket

Slide-in bracket for DMP control panel enclosure mounting

• Mounts auxiliary modules in DMP 350 and 350A enclosures without drilling or rework.
• Standard 3-hole mounting pattern ensures consistent, repeatable positioning every install.
• Supports relay cards and expansion boards, keeping modular upgrades mechanically aligned.

DMP · 350P-92

DMP 350P-92 Mounting Plate

Standardized mounting plate for DMP control panels in TCP/IP networks

• Installs inside DMP 340, 349, 349A, 350, and 350A series enclosures.
• Three-hole pattern supports the 377 Trouble Annunciator and compatible aux modules.
• Supports UL Fire/Burglary applications requiring repeatable module positioning.

DMP · 351

DMP 351 Universal Mounting Plate

Universal mounting plate for control panels and enclosures

• Mounts new XR Series panel over legacy DMP 1812 or Radionics enclosure footprint.
• Eliminates conduit rework — existing wall penetrations and wiring remain untouched.
• Passive adapter with no power or wiring requirements; typical install completes in under 30 min.

DMP · 352M-G

DMP 352M-G Extra Large Enclosure with Mounting Plate

Extra large 14.5" × 32" metal enclosure with included mounting plate

• 14.5" × 32" × 4" interior gives ample room for multi-board panel builds.
• Included mounting plate speeds rack or wall installation without added hardware.
• Lid adds 0.5" clearance per side, accommodating thicker cabling and connectors.

DMP · 352P-G

DMP 352P-G Extra Large Panel Enclosure

Extra large panel enclosure with 324 VA transformer for access control and building automation

• 14.5"×32"×4" interior accommodates multi-device layouts, relay banks, and wiring runs.
• Integrated 324 VA 100VAC wire-in transformer eliminates separate sourcing and reduces install time.
• 505-12 power supply comes pre-installed, reducing bench assembly steps before field deployment.

DMP · 352PM-G

DMP 352PM-G Power Distribution Enclosure with Transformers

Extra-large steel enclosure with integrated transformers for security and telecom

• 14.5"×32"×4" steel enclosure provides ample room for components and cable routing.
• Ships with 505-12 power supply and 100 VAC wire-in transformer pre-installed.
• TCP/IP support allows direct network communication with enclosure-mounted controllers.

DMP · 354-G

DMP 354-G Retrofit Plate

Panel-level retrofit plate for control system upgrades

• Installs 714 or 715 zone expanders into 350-series enclosures without panel removal.
• No conduit disconnection required, minimizing downtime on active, wall-mounted systems.
• Mounts directly to existing DMP 350-series enclosure structure for a clean retrofit fit.

DMP · 354A-G

DMP 354A-G Mounting Plate

Wall-mount control panel plate for DMP TCP/IP systems

• Mounts two 714 or 715 zone expander PCBs without removing the enclosure from the wall.
• Engineered for DMP 350 series enclosures, ensuring precise PCB alignment with backplane connectors.
• Requires only standard fasteners, enabling low-downtime retrofits to existing control panel installations.

DMP · 708

DMP 708 Bus Extender Modules

15VDC bus extender for DMP multi-zone system expansion

• Regenerates LX-Bus signal timing and amplitude to prevent data corruption on long runs.
• Operates across 8–15 VDC input range, compatible with standard DMP distributed power supplies.
• Mitigates EMI and crosstalk in noisy environments alongside power and telephone cabling.

DMP · 710

DMP 710 Bus Splitter/Repeater Module

TCP/IP bus splitter/repeater for multi-building access control networks

• Repeats bus signals over extended runs, eliminating dropouts beyond 500 ft.
• TCP/IP communication supports distributed reader architecture across multi-building sites.
• Runs on 15VDC and wall-mounts at 4.5"×2.75"×1.75" for tight IDF or junction installs.

DMP · 711

DMP 711 Zone Expansion Module

Network-based zone expansion module with TCP/IP and keypad reader support

• TCP/IP communication plugs into existing Ethernet infrastructure, eliminating proprietary cabling.
• Keypad reader support enables PIN-based credential entry at each expansion zone.
• Runs at 15VDC, integrating cleanly into standard security power distribution backbones.

DMP · 711S

DMP 711S Zone Expansion Module

TCP/IP zone expansion module for compatible DMP security systems

• Adds a single addressable zone via flying-lead to DMP XT/XR panels without hardware replacement.
• TCP/IP communication enables distributed zone supervision across multi-site deployments.
• Ships with 1k ohm resistor; UL 365/864/1076 and CSFM/FDNY listed for fire-rated installs.

DMP · 712-8

DMP 712-8 Zone Expansion Module

8-zone expansion module for DMP panel systems at 15VDC

• Adds 8 supervised burglary zones to a DMP panel without replacing or redesigning the system.
• Plug-in module slot with dip switch addressing keeps installation compact and wiring minimal.
• Pre-installed EOL resistors enable immediate zone supervision straight out of the box.

DMP · 716

DMP 716 Output Expansion Module

15VDC relay expansion for multi-door access control without main panel swap

• DMP output expansion module adds switched outputs to control panels
• 15VDC native DMP platform power - no aux supply required
• Modular expansion drops into existing DMP electrical closet wiring

DMP · 716T

DMP 716T Plug-In Screw Terminal Module

Plug-in screw terminal module for DMP system expansion slots

• Replaces the standard DMP 716 harness with individual screw terminals for field wiring.
• Plug-in connector seats directly into the 716 Output Expansion Module socket—no adapters needed.
• Accepts 18–22 AWG stranded wire, suitable for alarm loops, relay contacts, and 12VDC returns.

DMP · 718T

DMP 718T Plug-In Screw Terminal Module

Plug-in screw terminal module for DMP expansion platforms

• Captive screw terminals eliminate soldering, cutting field termination time during installs.
• Plug-in design fits standard DMP expansion slots, enabling I/O scaling without chassis replacement.
• Compact 4.50×2.75×1.75 in form factor supports wall-mount deployment in tight panel enclosures.