DMP · 341

DMP 341 Panel Enclosure

TCP/IP panel enclosure for retrofit and new security installations

• Pre-drilled mounting holes secure DMP XT/XR Series panels and transformers without custom work.
• Dual knockout ports in .75" or .5" sizes provide flexible conduit and cable entry routing.
• Gray powder-coat steel construction resists corrosion for reliable indoor wall-mount deployments.

DMP · 341B

DMP 341B Battery Bracket with 318T Battery Harness

Battery bracket with pre-terminated 318T harness for DMP control panels

• Pre-terminated 318T harness plugs directly into DMP panel, eliminating field wiring.
• Rigid bracket prevents battery movement and connector fatigue inside the enclosure.
• Fits standard control panel housings; no adapter plates or modifications required.

DMP · 349

DMP 349 Panel Enclosure

Metal panel enclosure for DMP control systems and access control

• Fits two 7.7 Ah backup batteries to maintain uptime during brief power outages.
• Keyed lock prevents unauthorized access to mounted control electronics.
• Dual-size knockouts enable flexible cable routing without pre-drilling.

DMP · 349A-G

DMP 349A-G Attack Panel Enclosure

TCP/IP attack panel enclosure for networked DMP security systems

• 16-gauge rolled steel door resists forced entry in high-risk control areas.
• Integral tamper switches detect enclosure breach and trigger immediate alerts.
• Dual-size cable knockouts support flexible conduit routing for panel wiring.

DMP · 350B

DMP 350B Slide-In Bracket

Slide-in bracket for DMP control panel enclosure mounting

• Mounts auxiliary modules in DMP 350 and 350A enclosures without drilling or rework.
• Standard 3-hole mounting pattern ensures consistent, repeatable positioning every install.
• Supports relay cards and expansion boards, keeping modular upgrades mechanically aligned.

DMP · 350P-92

DMP 350P-92 Mounting Plate

Standardized mounting plate for DMP control panels in TCP/IP networks

• Installs inside DMP 340, 349, 349A, 350, and 350A series enclosures.
• Three-hole pattern supports the 377 Trouble Annunciator and compatible aux modules.
• Supports UL Fire/Burglary applications requiring repeatable module positioning.

DMP · 351

DMP 351 Universal Mounting Plate

Universal mounting plate for control panels and enclosures

• Mounts new XR Series panel over legacy DMP 1812 or Radionics enclosure footprint.
• Eliminates conduit rework — existing wall penetrations and wiring remain untouched.
• Passive adapter with no power or wiring requirements; typical install completes in under 30 min.

DMP · 352M-G

DMP 352M-G Extra Large Enclosure with Mounting Plate

Extra large 14.5" × 32" metal enclosure with included mounting plate

• 14.5" × 32" × 4" interior gives ample room for multi-board panel builds.
• Included mounting plate speeds rack or wall installation without added hardware.
• Lid adds 0.5" clearance per side, accommodating thicker cabling and connectors.

DMP · 352P-G

DMP 352P-G Extra Large Panel Enclosure

Extra large panel enclosure with 324 VA transformer for access control and building automation

• 14.5"×32"×4" interior accommodates multi-device layouts, relay banks, and wiring runs.
• Integrated 324 VA 100VAC wire-in transformer eliminates separate sourcing and reduces install time.
• 505-12 power supply comes pre-installed, reducing bench assembly steps before field deployment.

DMP · 352PM-G

DMP 352PM-G Power Distribution Enclosure with Transformers

Extra-large steel enclosure with integrated transformers for security and telecom

• 14.5"×32"×4" steel enclosure provides ample room for components and cable routing.
• Ships with 505-12 power supply and 100 VAC wire-in transformer pre-installed.
• TCP/IP support allows direct network communication with enclosure-mounted controllers.

DMP · 354-G

DMP 354-G Retrofit Plate

Panel-level retrofit plate for control system upgrades

• Installs 714 or 715 zone expanders into 350-series enclosures without panel removal.
• No conduit disconnection required, minimizing downtime on active, wall-mounted systems.
• Mounts directly to existing DMP 350-series enclosure structure for a clean retrofit fit.

DMP · 354A-G

DMP 354A-G Mounting Plate

Wall-mount control panel plate for DMP TCP/IP systems

• Mounts two 714 or 715 zone expander PCBs without removing the enclosure from the wall.
• Engineered for DMP 350 series enclosures, ensuring precise PCB alignment with backplane connectors.
• Requires only standard fasteners, enabling low-downtime retrofits to existing control panel installations.

DMP · ES501

DMP ES501 Plug-In Transformer Enclosure

Compact transformer enclosure for DMP NFC/13.56MHz access control

• Hinged metal cover with built-in venting protects transformers while dissipating heat.
• Compact 4.25″×5.625″×2.5″ footprint consolidates transformer power at the control panel.
• Supports low-voltage transformers rated over 20 VA for DMP access control installations.

DMP · ES502

DMP ES502 Transformer Enclosure

Isolated transformer housing for DMP control panel systems

• Vented metal housing protects transformers 20 VA and above from dust and accidental contact.
• Compact 4.25" × 5.625" × 3.75" footprint integrates into standard DMP control panel layouts.
• Hinged cover enables fast one-handed transformer access for maintenance in wall-mount installs.

ELK Products · ELK-PB1

ELK Products Project Box Pb1 - ELK-PB1

• Wireless panic button on a keychain - sub-30g pocket-carry form
• 315 or 433 MHz wireless transmits regardless of system arm state
• CR2032 coin cell power - no wiring or external supply needed

Honeywell · PW5K1ENC3

Honeywell Commercial Security PW5K1ENC3 Enclosure with Plug

Protective enclosure with integrated plug for Honeywell mobile computers

• Durable enclosure protects Honeywell mobile computers in warehouse and field deployments.
• Integrated plug connector simplifies wired infrastructure tie-in during new or retrofit installs.
• Rated for 220VAC operation, supporting standard commercial power environments globally.

Honeywell · PW5K2ENC2

Honeywell PW5K2ENC2 High-Density Enclosure

High-density wired enclosure for simultaneous multi-device charging and sync

• Wired-only architecture eliminates RF interference and reduces wireless attack surface.
• High-density enclosure consolidates multi-device charging and sync in a single footprint.
• Integrates with Honeywell mobile computing ecosystems for compatible fleet management.

Kantech · KT-1

Kantech KT-1 IP Controller Single Gang Mount

Single gang IP controller for 1-door retrofit installs in standard electrical box

• KT-1 IP controller in single-gang electrical box form
• TCP/IP + RS-485 + Wiegand for mixed hardware integration
• Fits retrofit installs without enclosure modification

Kantech · KT-CAB3000LDR

Kantech KT-CAB3000LDR 28-inch Enclosure Door Cover

28-inch enclosure door cover for up to 4 KT-300 controllers, IP67-rated

• 28-inch enclosure houses up to four KT-300 controllers
• IP67-rated cabinet protects against dust and moisture
• Integrated door cover for clean professional install

Lifesafety Power · E4A-BACKPLATE-ONLY

Lifesafety Power E4A-BACKPLATE-ONLY Backplate for E4A enclosure

• Replacement backplate assembly restores E4A enclosure functionality without full unit swap.
• Designed for E4A series ensuring precise mechanical fit and correct electrical alignment.
• Supports access control, alarm, and backup battery staging deployments at 230 VAC installations.

Lifesafety Power · E8V-BOXED

Lifesafety Power E8V-BOXED Enclosure. E8 36" X 30" X6-1/2" Blk

• 36"×30"×6.5" profile fits standard 16" and 24" stud-center wall cavities.
• Vertx back plate supports 35mm DIN rail, M5/M6 fasteners for organized terminations.
• Top and side knockouts accept conduit entries up to 1.5" NPT for clean cable routing.

Lifesafety Power · RGM-D8PZ1

Lifesafety Power Rgm-D8PZ1 Empty R2U Rackdrawer

• Mounts up to four Lenel access control panels on a removable backplate in 2U space.
• 19" EIA-compliant form factor (19W × 3.5H × 20.5D in.) fits standard rack rails.
• Integrated lockset and wire management arm reduce tampering risk and cable strain.

Lifesafety Power · RGM-X-BOXED

Lifesafety Power RGM-X-BOXED Gemini Rack Drawer RGM-X 2U black

• Mounts in standard 19-inch racks, occupying only 2U of vertical space.
• Pull-out drawer design provides direct access to internal components during maintenance.
• Engineered for Lifesafety Power Gemini system frames; verify chassis compatibility before ordering.

STI · EP141207-O

STI EP141207-O EnviroArmour Polycarbonate Door Controller

• Manages up to 7 door/reader zones over TCP/IP for scalable networked access control.
• Injection-molded polycarbonate resists corrosion in humid, outdoor, or high-moisture zones.
• 44 dB(A) audible alarm output suits retail and office spaces without excessive noise.