Sub categories

Showing Results for Infrastructure

Compare

Out of stock
NETGEAR

SKU: NBK752-100NAS

NETGEAR Orbi 5G WIFI 6 Mesh System - NBK752-100NAS
- Wi-Fi 6 (802.11ax) tri-band radio supports concurrent IP camera and IoT traffic.
- Integrated 5G modem provides cellular backhaul failover for sites without fiber.
- Self-healing mesh topology eliminates single points of failure across distributed sites.
$1,706.88 $1,158.99 Save $547.89

Add to Cart
The item has been added
Free shipping over $499

$1,706.88 $1,158.99 Save $547.89

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBE870-100NAS

NETGEAR Orbi 870 Series Tri-band WIFI 7 Mesh - RBE870-100NAS
- Dedicated 6 GHz backhaul at 10 Gbps prevents client and relay traffic from competing.
- PoE+ (802.3at) support enables flexible mounting without a local AC outlet.
- WiFi 7 (802.11be) tri-band operation maintains gigabit-plus rates for 6/5/2.4 GHz clients.
$876.71 $596.99 Save $279.72

Add to Cart
The item has been added
Free shipping over $499

$876.71 $596.99 Save $279.72

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBE872-100NAS

NETGEAR Orbi 870 Series Tri-band WIFI 7 Mesh - RBE872-100NAS
- WiFi 7 (802.11be) delivers multi-gigabit throughput with sub-5ms latency for 4K/8K streams.
- Dedicated tri-band backhaul isolates surveillance traffic from client and guest networks.
- 2-pack covers up to 5,000 sq ft—suitable for warehouses, campuses, and multi-building sites.
$1,551.71 $1,082.99 Save $468.72

Add to Cart
The item has been added
Free shipping over $499

$1,551.71 $1,082.99 Save $468.72

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBKE963B-100NAS

NETGEAR Orbi AX11000 1ROU +2 Satell Bndl - RBKE963B-100NAS
- WiFi 6 tri-band mesh supports 6–8 concurrent 4K camera streams per unit.
- Dedicated wired Ethernet backhaul keeps full client airtime reserved for cameras.
- Backward-compatible with 802.11ac/n, integrating mixed-gen NVRs and IP cameras.
$2,327.57 $1,619.99 Save $707.58

Add to Cart
The item has been added
Free shipping over $499

$2,327.57 $1,619.99 Save $707.58

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBK753-100NAS

NETGEAR Orbi AX4200 1ROU 2 Satell Bndl - RBK753-100NAS
- Wi-Fi 6 (802.11ax) with OFDMA supports 20+ concurrent wireless clients without congestion.
- Three-unit bundle covers up to 5,000 sq ft—scales for warehouses and multi-floor deployments.
- Dedicated wireless backhaul keeps camera and sensor traffic isolated from client band contention.
$931.02 $651.99 Save $279.03

Add to Cart
The item has been added
Free shipping over $499

$931.02 $651.99 Save $279.03

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBR860S-100NAS

NETGEAR Orbi AX6000 TB 10G Router 1Y Armor - RBR860S-100NAS
- 10G wired port handles simultaneous NVR feeds without backhaul congestion.
- Wi-Fi 6 tri-band mesh extends coverage to remote cameras across large sites.
- 1-year Armor subscription adds malware and intrusion detection for IP devices.
$667.22 $466.99 Save $200.23

Add to Cart
The item has been added
Free shipping over $499

$667.22 $466.99 Save $200.23

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBK863S-100NAS

NETGEAR Orbi AX6000 TB 1ROUT+2SATEL Bndl - RBK863S-100NAS
- AX6000 WiFi 6 mesh covers 5,000–6,000 sq ft with 1 router and 2 satellites.
- Self-optimizing backhaul maintains consistent uplink for multi-camera streams.
- WPA3 encryption protects surveillance traffic against unauthorized network access.
$1,706.88 $1,188.99 Save $517.89

Add to Cart
The item has been added
Free shipping over $499

$1,706.88 $1,188.99 Save $517.89

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBK863SB-100NAS

NETGEAR Orbi AX6000 TB 1ROUT+2SATEL Bndl - RBK863SB-100NAS
- WiFi 6 (802.11ax) delivers AX6000 aggregate throughput across dual-band operation.
- 1 router + 2 satellites extends mesh coverage to 10,000+ sq ft without wired backhaul.
- 2.4 GHz band supports legacy PoE IP cameras and wireless access control panels.
$1,706.88 $1,191.99 Save $514.89

Add to Cart
The item has been added
Free shipping over $499

$1,706.88 $1,191.99 Save $514.89

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBK862S-100NAS

NETGEAR Orbi AX6000 TB 2PK 1Y Armor Bndl - RBK862S-100NAS
- WiFi 6 AX6000 dual-band delivers 573 Mbps on 2.4 GHz and 4,804 Mbps on 5 GHz.
- Seamless mesh roaming across router and satellite supports wireless camera deployments.
- Included 1-year Armor subscription provides gateway-level threat detection for all connected devices.
$1,241.36 $867.99 Save $373.37

Add to Cart
The item has been added
Free shipping over $499

$1,241.36 $867.99 Save $373.37

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBK652S-100NAS

NETGEAR Orbi TB DB MIX 2PK 1Y Armor Bndl - RBK652S-100NAS
- Two-unit mesh topology eliminates dead zones for stable IP camera and NVR connectivity.
- Supports 802.11ac on 2.4 GHz and 5 GHz bands for flexible wireless surveillance backhaul.
- Bundled 1-year NETGEAR Armor subscription provides threat detection and device-level protection.
$543.09 $377.99 Save $165.10

Add to Cart
The item has been added
Free shipping over $499

$543.09 $377.99 Save $165.10

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBK12-100NAS

NETGEAR Orbi Whole Home Mesh WIFI System Delivers - RBK12-100NAS
- Dual-band 802.11ac mesh delivers 1.2 Gbps aggregate for 10–15 concurrent security devices.
- Dedicated 5 GHz backhaul channel eliminates single-point RF failure across multi-node deployments.
- Multi-node router-plus-satellite layout closes coverage gaps in warehouses and multi-story facilities.
$232.74 $163.99 Save $68.75

Add to Cart
The item has been added
Free shipping over $499

$232.74 $163.99 Save $68.75

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: CBK752-100NAS

NETGEAR Orbi WIFI 6 Docsis 3.1 Mesh WIFI System - CBK752-100NAS
- Integrated DOCSIS 3.1 modem eliminates separate hardware, reducing rack space and failure points.
- AX6000 WiFi 6 backbone sustains 8–12 concurrent HD/4K IP camera streams without congestion.
- Mesh architecture covers up to 5,500 sq ft with seamless roaming for cameras and mobile clients.
$465.50 $327.99 Save $137.51

Add to Cart
The item has been added
Free shipping over $499

$465.50 $327.99 Save $137.51

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBS860B-100NAS

NETGEAR Orbi WIFI 6E Satellite - RBS860B-100NAS
- Tri-band 802.11ax (2.4/5/6 GHz) cuts client-backhaul contention in dense RF environments.
- Dedicated 6 GHz backhaul channel preserves client bandwidth on 2.4 and 5 GHz radios.
- Dual RJ45 ports support wired uplink and local hardwired devices like cameras or readers.
$667.22 $467.99 Save $199.23

Add to Cart
The item has been added
Free shipping over $499

$667.22 $467.99 Save $199.23

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: RBE373-100NAS

NETGEAR ORBI3 Db WIFI7 3PK Bndl - RBE373-100NAS
- WiFi 7 (802.11be) delivers ~2.4x the throughput of WiFi 6 for dense traffic loads.
- Three-unit mesh bundle scales distributed coverage across warehouses or multi-floor sites.
- Supports 802.1X auth, managed switches, and commercial VPNs for enterprise integration.
$543.09 $379.99 Save $163.10

Add to Cart
The item has been added
Free shipping over $499

$543.09 $379.99 Save $163.10

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBE772-100NAS

NETGEAR ORBI7 TB WIFI7 2PK Bndl - RBE772-100NAS
- WiFi 7 mesh system covers medium-to-large deployments across multiple zones.
- Two-unit router-satellite bundle connects via standard Ethernet uplink—no proprietary controller.
- Factory-new, US direct-sourced hardware eliminates grey-market and parallel-import risk.
$853.43 $596.99 Save $256.44

Add to Cart
The item has been added
Free shipping over $499

$853.43 $596.99 Save $256.44

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBE773-100NAS

NETGEAR ORBI7 TB WIFI7 3PK Bndl - RBE773-100NAS
- WiFi 7 (802.11be) tri-band mesh covers large facilities with multi-gigabit throughput.
- Three-unit bundle (router + two satellites) eliminates dead zones across wide floor plans.
- Supports WPA3 and 802.1X authentication for enterprise-grade network security compliance.
$1,086.19 $759.99 Save $326.20

Add to Cart
The item has been added
Free shipping over $499

$1,086.19 $759.99 Save $326.20

Add to quote Compare

Infrastructure

Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.

Plan Your Deployment

Total PoE power budget and port density requirements
Switch throughput and uplink capacity planning
Redundancy and failover design considerations
Distance limitations and fiber conversion needs
Power conditioning and voltage compatibility

PoE Planning Guide Get Sizing Help

What to Look For When Buying

The six decisions that matter most before you spec.

PoE Power Budget Math

A 24-port PoE+ switch with 370W total budget can't actually run 24 outdoor cameras at peak 25W each. Simultaneous peak — not nameplate — is the limit. Always verify per-port PoE allocation and total budget against actual camera load. See PoE budget planning and why your PoE switch fails after 18 cameras.

328-Foot Ethernet Limit

Cat5e, Cat6, and Cat6A all top out at 100 meters (328ft) per TIA-568. Past that, you need a media converter to fiber, a PoE extender, or an intermediate switch. Common gotcha: in-wall patch + faceplate + drop + jumper all count against 328ft. Long runs to perimeter cameras frequently exceed the limit — plan for fiber or coax-PoE extension.

Managed vs Unmanaged Switches

Unmanaged switches work for small deployments but provide no VLAN segmentation, no QoS for video traffic, no monitoring, and no remote troubleshooting. Managed switches (Layer 2 or Layer 3) let you isolate cameras on a dedicated VLAN, prioritize video over office traffic, and diagnose link failures from a central SNMP platform. Spec managed for any deployment over 8 cameras.

UPS Sizing & Runtime

NVR + switches + cameras + access control have very different power profiles than office gear. Size UPS for actual wattage of all connected loads + 20% headroom, and calculate runtime with battery-life curves (runtime is non-linear — doubling load often cuts runtime 60%+). Surveillance UPS should provide 15-30 min to accommodate generator transfer or graceful shutdown.

Copper vs Fiber Uplinks

In-rack uplinks on 10G copper (Cat6A) work fine for short runs. Between-building and multi-floor uplinks should be fiber — single-mode for >300m, multimode for under. Fiber is also electrically isolated, which matters in lightning-prone environments. Axis, Hanwha, and Ubiquiti switches include SFP/SFP+ uplinks across most models.

Cooling & Airflow in Racks

Surveillance gear runs 24/7 — a closed rack at 90°F interior temperature will fail drives and switches faster than spec. Specify perforated doors, rack-mount fans, and leave 1U of airflow gap above/below heat-generating equipment. NVRs with internal fans need front-to-back airflow; network switches vary by vendor. Check thermal spec before sealing a wall-mount enclosure.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

802.3af / at / bt PoE Standards

802.3af = 15.4W/port (entry cameras), 802.3at PoE+ = 25.5W/port (most outdoor cameras), 802.3bt PoE++ Type 3 = 60W, Type 4 = 90W (PTZ, heated, multi-sensor). Specify switch support for the highest standard your cameras need — future-proofing with PoE++ switches costs marginally more.

TIA-568 Cabling Standards

Cat5e rated to 1 Gbps at 100m. Cat6 rated to 10 Gbps at 55m, 1 Gbps at 100m. Cat6A rated to 10 Gbps at 100m with proper grounding. Use Cat6A for new surveillance cabling runs — marginal cost premium over Cat6, meaningful margin for long runs + high PoE.

SFP / SFP+ / QSFP+ Modules

Small Form-factor Pluggable optics for fiber uplinks. SFP = 1 Gbps, SFP+ = 10 Gbps, QSFP+ = 40 Gbps. Match module to switch vendor compatibility (some vendors lock to their own brand of optics). Multimode fiber with OM3/OM4 for ≤300m, single-mode for longer or future-proof runs.

VLAN Segmentation

Dedicated VLAN for surveillance isolates camera traffic from office network — improves security (camera-to-camera lateral movement blocked), performance (no contention with office traffic), and troubleshooting. Configure access-control and intercom VLANs separately. Managed switches required; unmanaged switches cannot segment.

Long-Reach PoE Extension

Ethernet-over-Coax (EoC) extends Ethernet + PoE to 1,500+ feet over existing RG59 coax — ideal for analog-to-IP retrofits. Ethernet-over-UTP extenders push runs to 4,000ft over CAT cable. NVT Phybridge CHARIoT, Altronix eBridge, and Veracity Highwire are the common product families. Rate-limited to 100 Mbps typically.

UPS Topology: Line-Interactive vs Double-Conversion

Line-interactive UPS switch to battery on power failure — sufficient for office gear. Double-conversion (online) UPS convert AC→DC→AC continuously, providing perfectly conditioned power — required for sensitive SCADA/security gear in dirty-power environments. Specify double-conversion for NVRs at critical sites.

Typical Deployment Scenarios

8-Camera Single-Site Retrofit

Existing network + 8 outdoor IP cameras. Add a 16-port managed PoE+ switch (Ubiquiti UniFi, Axis T85) on a dedicated VLAN. 1U rack UPS for the NVR + switch. 120-160 watts total PoE budget comfortably runs 8 outdoor cameras with heater + IR.

48-Camera Campus Upgrade

Four buildings, 48 cameras total, existing fiber backbone. Per-building 24-port PoE++ switch with SFP+ fiber uplink to core. Dedicated surveillance VLAN, QoS for video traffic, SNMP monitoring. 2-post relay rack in each IDF closet with dedicated surveillance UPS.

Perimeter Fence Line (1,200ft)

6 bullet cameras + 2 PTZs along perimeter fence, main NVR in building. Fiber media converter + outdoor-rated fiber to a PoE++ switch in a weatherproof enclosure at the fence line. Alternative: NVT Phybridge CHARIoT over existing coax for retrofit applications.

Multi-Floor Office Tower

Stacked IDFs on every floor, cameras + access control + intercom on dedicated VLANs. Cisco Catalyst or Ubiquiti UniFi Pro managed switches per floor with 10G fiber uplink to building core. Per-IDF 3U UPS. Integration with VMS and access control head-end at main BDF.

Frequently Asked Questions

How do I calculate PoE budget for a camera deployment?

Sum the peak wattage of every camera (not nameplate — check spec sheet for "PoE class" or "max consumption"). Add 15-20% headroom for inrush during cold-start. The result is your required simultaneous-peak PoE budget. A 24-port PoE+ switch advertised at 370W can only run about 18 outdoor cameras with heaters + IR — see PoE budget planning.

What's the maximum Ethernet cable run for an IP camera?

100 meters (328 feet) per TIA-568 — total distance from switch port to camera port. That includes in-rack patch cords, in-wall cabling, faceplate jack, and camera jumper. For longer runs, use fiber with a media converter or a long-reach PoE extender. Going past 328ft on copper causes intermittent packet loss that looks like camera problems.

Do I need managed or unmanaged PoE switches?

For more than 8 cameras or any mixed-use network (cameras sharing infrastructure with office traffic), specify managed. VLAN segmentation isolates camera traffic for security and performance; QoS ensures video gets bandwidth priority; SNMP monitoring surfaces failures before users call. Unmanaged switches are acceptable only for small standalone deployments.

What UPS runtime should I plan for an NVR + switch?

15-30 minutes of runtime at actual load is typical — enough to ride through brief outages or allow graceful shutdown before battery exhaustion. For sites with generator transfer, 5-10 minutes is sufficient. Size UPS wattage for actual connected load + 20%, and use the vendor's runtime-at-load curve (runtime is non-linear). Double-conversion UPS for sensitive or dirty-power sites.

How far can I extend PoE past 328 feet?

Ethernet-over-Coax extenders (NVT Phybridge CHARIoT, Altronix eBridge) push Ethernet + PoE to 1,500+ feet over existing RG59/RG6 coax — ideal for analog-to-IP retrofits. UTP-based extenders reach 2,000-4,000 feet on Cat cable at reduced bandwidth (typically 100 Mbps). For new runs over 328ft, fiber + PoE switch at the camera end is usually cleaner architecture.

Should I put cameras on a separate VLAN?

Yes — always. A dedicated camera VLAN isolates camera traffic from office network for security (blocks camera-to-camera lateral movement if one is compromised), performance (cameras don't contend with office bandwidth), and troubleshooting (camera traffic is cleanly separated for packet capture). Requires managed switches; takes 10 minutes to configure on Ubiquiti UniFi, Cisco Catalyst, or any enterprise switch.

Sub categories

Showing Results for Infrastructure

Infrastructure

Plan Your Deployment

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading