Camden · CM-5040

Camden Push/Pull N/C Maintained Red Only - CM-5040

30VDC push/pull electronic strike engineered for fail-secure, maintained normally-closed (N/C) operation in retrofit and new-build access control

• Fail-secure N/C logic stays locked on power loss, eliminating relay-chatter unlock risk.
• 30VDC operation integrates directly with standard access control power supplies.
• Push/pull mechanism supports either door swing direction without mechanical reversal.

Camden · CM-4050

Camden Push/Pull N/O \& N/C Maintained Red Only - CM-4050

N electric lock strike designed for 30VDC access control systems requiring maintained contact switching to control electromagnetic locks or electric

• Dual N/O & N/C maintained contacts eliminate external relay wiring for fail-safe or fail-secure logic.
• Rated 15A @ 30VDC continuous — verify panel strike driver sustains load without voltage sag.
• Accepts push-to-open and pull-to-open frame mounting in a compact 4.50" × 4.50" × 1.75" body.

Camden · CM-5050

Camden Push/Pull N/O \& N/C Maintained Red Only - CM-5050

30VDC push/pull maintained strike designed for commercial access control applications requiring both normally open (N/O) and normally closed (N/C)

• Dual N/O & N/C outputs let you wire fail-safe and fail-secure from one device.
• Maintained 30VDC action holds unlocked state without relay flicker or secondary logic.
• 6A switching capacity supports direct solenoid or relay coil control at the strike.

Camden · CM-4030

Camden Push/Pull, N/O, Maintained, Red Only

Push/pull strike lock, 30VDC maintained, red indicator for door access

• Normally open maintained operation engages continuously when 30VDC powered
• Push/pull control integrates into doorframe installations for access control
• Red-only indicator provides visual status feedback during lock operation

Camden · CM-5070

Camden Push/Turn to Release N/C Maintained Red Only - CM-5070

Normally closed (N/C) maintained electronic strike designed for installations requiring both electrical control from an access control system and

• N/C maintained contact rated 6A @ 30VDC sustains release while coil remains energized.
• 2 3/8" red push/turn button provides mechanical egress independent of panel power or network.
• Bayonet interlocking design stacks contact blocks for auxiliary door sensor or alarm bypass.

Camden · CX-ESF-3BR

Camden Radius Hollow Metal. Face plate for - CX-ESF-3BR

Brushed aluminum face plate for hollow metal door installations

• Brushed aluminum finish resists fingerprints and blends with standard commercial hardware.
• Pre-drilled mounting holes align with CX series strike assemblies for consistent bolt travel.
• Designed for hollow metal door frames, bridging magnetic lock strikes to the frame surface.

Camden · CM-6040

Camden Red Push To Lock Key To Release N/C Maintained - CM-6040

30VDC electronic strike designed for push-to-lock operation with mechanical key-to-release override and N/C maintained hold

• Push-to-lock, N/C maintained logic keeps door secured whenever 30VDC power is present.
• Key-release mechanical override enables emergency egress or maintenance without system access.
• Red housing aids low-light visibility; fits double-gang and 4×4 box preparations.

Camden · CM-6050

Camden Red Push To Lock Key To Release N/O \& N/C - CM-6050

30VDC electronic strike designed for access control systems requiring push-to-lock operation combined with key-to-release manual override

• Push-to-lock solenoid with key-to-release override ensures code-compliant emergency egress.
• Dual N/O and N/C contacts support both fail-secure and fail-safe configurations in one unit.
• 30VDC solenoid integrates directly with standard commercial access control panels and door controllers.

Camden · CM-6030

Camden Red Push To Lock Key To Release N/O Maintained - CM-6030

30VDC electronic strike designed for access control systems requiring push-to-lock activation with key-to-release operation

• 30VDC rating integrates directly with standard commercial access control panels.
• N/O maintained contact defaults to locked state on power loss—no backup battery needed.
• Key-to-release override enables manual egress without power for life-safety compliance.

Camden · CX-DE502SO

Camden Remote Annunciator for both audible and - CX-DE502SO

Remote annunciator module designed to extend audible and visual notification capability across distributed access points controlled by Camden

• Monitors up to 4 CX-DE1200 delayed egress locks per unit, reducing module count.
• Delivers 90dB audible tone plus LED status indication remotely over TCP/IP at 24VDC.
• Wall or rack mountable; centralizes door status at security stations without added wiring.

Camden · CX-DESPK

Camden Remote Speaker Station with key for both audio - CX-DESPK

Remote speaker station designed to extend audio communication and credential-reading capability across multi-door access control deployments

• Controls up to 4 independent door circuits with 24VDC magnetic lock activation.
• Native proximity reader support eliminates decoder modules, reducing wiring overhead.
• Wall and rack mount options allow flexible placement at doors or equipment cabinets.

Camden · CM-120G

Camden Rubber gasket for any stainless steel single - CM-120G

Replacement rubber gasket engineered to seal stainless steel single gang faceplate assemblies in access control keypad installations

• Rubber gasket seals single-gang SS faceplate against rain and dust ingress.
• Replaces degraded seals in 10–15 minutes; no adhesive mixing or cure time required.
• Compatible with CM-120 Series 24VDC Wiegand keypads supporting up to 999 users.

Camden · CM-AF142SOFE

Camden Single Gang LED Dome Light w/ adjustable - CM-AF142SOFE

When access control deployments require clear visual confirmation of door status or alarm conditions, integrators need illumination solutions that

Camden · CM-AF141SO

Camden Single Gang LED Dome Light w/ Sounder. - CM-AF141SO

Single-gang mounted LED dome light paired with an integrated piezo sounder for visual and audible corridor annunciation in access control and

• Mounts to any standard single-gang box; runs on 12–24V AC/DC without relays.
• Integrated piezo sounder delivers 93 dB at 1 m with user-adjustable volume output.
• Wedge lens provides corridor-visible LED indication from both ends of a hallway.

Camden · CM-AF142SO

Camden Single Gang Multi-Color LED Dome Light w/ - CM-AF142SO

Single-gang multi-color LED dome light with integrated piezo sounder, designed to provide combined visual and audible annunciation at door access

• Combines 93 dB piezo sounder and multi-color LED into one single-gang unit.
• Accepts 12V or 24V AC/DC, integrating with virtually any access control panel.
• Color selection (red/green/blue) set at wiring time — no controller software needed.

Camden · CM-420RPTE

Camden Single gang N/O and N/C contacts Red button - CM-420RPTE

Hardwired push-button switch designed for door activation and access control manual release

• Dual N/O and N/C contacts enable strike activation and alarm supervision in one device.
• Accepts 12V or 24V DC, compatible with standard access control power supplies and solenoids.
• Single-gang ABS housing retrofits directly into existing electrical boxes with no adapters.

Camden · CM-1000/21

Camden Single gang neoprene gasket for Camden push - CM-1000/21

Single gang neoprene gasket designed for Camden push button assemblies operating at 30VDC in access control systems

• Neoprene construction seals against moisture and dust in outdoor deployments.
• Direct single-gang drop-in replacement requires no hardware modification.
• Rated for 30VDC Camden push button assemblies, maintaining existing infrastructure.

Camden · CM-450RL-7724-CPC

Camden Single gang Push/Pull N/O \& N/C - CM-450RL-7724-CPC

Single gang push/pull button controller designed for door access control activation and relay switching in commercial and institutional settings

• Dual N/O and N/C contact blocks fire from one press, eliminating external relay stages.
• 6A @ 30V rating drives EM strikes and solenoid locks on 12–24V AC/DC without amplification.
• Free-spinning 18-gauge stainless button resists jamming and abuse in high-traffic corridors.

Camden · CM-450R

Camden Single gang Push/Pull N/O \& N/C Stainless - CM-450R

Single gang push/pull faceplate designed for hardwired access control and door activation

• Dual N/O and N/C contacts fire simultaneously, eliminating external relay logic.
• 18-gauge stainless steel construction meets NEMA 4X rating for washdown and salt-air.
• Free-spinning vandal-resistant button installs in any standard single-gang wall box.

Camden · CV-110SPK

Camden Slim-line stand alone prox. reader \& keypad - CV-110SPK

Standalone proximity reader and keypad unit for single-door access control

• Dual-protocol output (OSDP + Wiegand) integrates with modern and legacy panels.
• Reads HID 37-bit and AWID 34-bit prox formats; supports up to 2,000 users.
• Standalone design consolidates reader and keypad into one device for single-door installs.

Camden · CM-1000/45

Camden SPDT maintained contact switch 6 A @ 125 V 3 - CM-1000/45

N SPDT (single pole, double throw) maintained contact switch engineered for access control systems, electromagnetic strikes, and auxiliary

• SPDT maintained contacts hold state without coil power, eliminating idle heating.
• Dual rating (6A/125VAC, 3A/30VDC) covers both legacy DC strikes and 120VAC loads.
• TCP/IP interface enables remote status monitoring without dedicated hardwired relay racks.

Camden · CM-1000/40

Camden SPDT momentary contact switch, 6 A @ 125 VAC, 3 A @ 30 VDC

SPDT momentary switch for door strikes and locks, TCP/IP networked

• 6 A @ 125 VAC / 3 A @ 30 VDC rated for solenoid strikes and relays
• TCP/IP enabled integration with networked access control systems
• SPDT momentary contact operation for electronic lock and strike control

Camden · CM-5085GPTE

Camden Spring Return DPST 1-60 sec Pneumatic Time - CM-5085GPTE

Spring return, dual-pole single-throw (DPST) pneumatic time delay module engineered for controlled actuation of electromagnetic door strikes in

• Field-adjustable 1–60 sec pneumatic delay eliminates separate electrical timers.
• DPST contacts at 24VDC/6A drive magnetic strikes or solenoids without added relays.
• Mechanical spring return resets on power loss, preventing stuck contacts at egress doors.

Camden · CM-5085RPTE

Camden Spring Return DPST 1-60 sec Pneumatic Time - CM-5085RPTE

2 3/8-inch red mushroom button with integrated spring-return pneumatic timer designed for access control systems requiring electromagnetic strike or

• DPST contacts deliver simultaneous NO and NC switching from a single actuator at 24VDC/6A.
• Mechanical pneumatic timer adjusts 1–60 sec with no panel power required for timing cycles.
• Rated 1,000,000 activation cycles with auto spring-return—no manual reset in high-traffic egress.

Camden · CM-4085RPTE

Camden Spring Return DPST 1-60 sec Pneumatic Timer - CM-4085RPTE

DPST pneumatic timer designed for access control, door strike circuits, and electronic locking systems requiring adjustable time-delay switching with

• DPST configuration switches two independent circuits simultaneously from one activation.
• 1–60 sec adjustable pneumatic delay integrates directly into 24VDC access control rails.
• Spring-return mechanism fails safe to deactivated state on power or air interruption.

Camden · CM-7085

Camden Spring Return, DPST 1-60 SEC Pneumatic Time Delay, (Requires...

Adjustable pneumatic time delay 1-60 sec, DPST switch for access control

• 1–60 second adjustable delay with spring return pneumatic actuation at 24VDC
• DPST configuration integrates with HID credential and TCP/IP networked systems
• Pneumatic timing mechanism operates independent of electrical supply variations

Camden · CM-1000/35

Camden SPST maintained contact (on/off) switch 6 A - CM-1000/35

Hard-wired, key-operated SPST maintained contact switch designed for direct strike control and access point activation in installations requiring

• Maintained SPST output latches on/off, eliminating relay chatter on strikes and door-holds.
• Rated 6A@125VAC, 3A@250VAC, and 30VDC—one switch spans low-voltage and line-voltage installations.
• Mortise cylinder interface fits 1", 1-1/8", or 1-1/4" cylinders with no set screws required.

Camden · CM-1000/37

Camden SPST maintained contact switch heavy duty 15 - CM-1000/37

Surface-mount key switch designed for access control systems requiring manual keyed activation of door strikes and electromagnetic locks

• Maintained 15A/30 VDC SPST contact holds closed after key turn—no continuous key pressure needed.
• 1/4" die-cast aluminum housing with rubber gasket supports indoor or outdoor wall and pole mounting.
• Pre-wired 18 AWG color-coded leads with heat-shrink sleeves enable direct relay or strike controller wiring.

Camden · CM-1000/32

Camden SPST momentary contact switch N/C 6 A @ 125 - CM-1000/32

Single-pole, single-throw (SPST) momentary contact switch engineered for hardwired access control circuits, door strikes, electromagnetic locks, and

• N/C contacts default closed, preserving locked state during power loss for failsafe designs.
• Dual-rated 6A@125VAC and 3A@30VDC supports both AC strikes and DC mag-locks on one SKU.
• TCP/IP integration connects directly to controller platforms without additional gateways.

Camden · CM-1000/30

Camden SPST momentary contact switch N/O 6 A @ 125 - CM-1000/30

Surface-mount SPST (single-pole single-throw) momentary contact switch designed for access control, door strike activation, and electromagnetic lock

• Dual-rated 6A@125VAC / 3A@30VDC covers line- and low-voltage circuits natively.
• Accepts 1"–1¼" mortise cylinders with rotation-locking locators; no set screws needed.
• Die-cast aluminum housing with rubber gasket supports outdoor wall or pole mounting.

Camden · CM-1000/31

Camden SPST momentary contact switch N/O heavy duty - CM-1000/31

N SPST momentary contact switch rated 15 amperes at 30VDC, engineered for access control circuits where reliable, keyed switching is non-negotiable

• 15A at 30VDC SPST N/O rating handles electric strike and mag-lock loads directly.
• Accepts 1", 1-1/8", and 1-1/4" mortise cylinders with no modification required.
• Cast aluminum enclosure with weather gasket supports wall or pole outdoor deployment.

Camden · CM-PT375SS-18

Camden Stainless steel endcaps 18\" length - CM-PT375SS-18

N 18-inch stainless steel endcap designed for power transfer cable terminations in access control and electric strike installations

• 304/316-grade stainless steel resists corrosion in coastal and high-humidity installs.
• 18-inch rigid profile covers standard door-frame conduit runs without sag or gaps.
• Sized for 3/8-inch ID power transfer cable; verify cable diameter before ordering.

Camden · CM-PT250SS-7

Camden Stainless steel endcaps, 7\" length (Formerly CM-PTSS-7)

7" stainless steel endcap assembly with TCP/IP and RS-232 support

• Corrosion-resistant stainless steel construction for durable deployments
• Dual communication: TCP/IP for networked systems and RS-232 for serial
• 7-inch length sized for standard access control enclosure integration

Camden · CM-PT375SS-7

Camden Stainless steel endcaps, 7\" length (Formerly CM-PTSS38-7)

7" stainless steel endcaps for corrosion-resistant Camden access control

• Corrosion-resistant stainless steel construction rated for outdoor environments
• 7-inch length compatible with Camden access control door systems
• TCP/IP and RS-232 communication support for integrated security deployments

Camden · CX-EPD-2000L

Camden Standard body No faceplate - CX-EPD-2000L

Standard body enclosure without a faceplate, designed as a base unit for Camden access control installations

• 24VDC operation integrates directly with Camden CX-PS10UL and CX-PS30UL supplies.
• Faceplate-free design supports OEM builds and retrofit installations with existing panels.
• Standard body housing provides a clean base for custom access control configurations.

Camden · CM-23D

Camden Surface Box Deep - For wireless. - CM-23D

Surface-mounted enclosure engineered to house wireless credential reader electronics in networked access control systems

• Deep surface-mount profile installs without wall cavity prep—ideal for retrofits.
• TCP/IP communication integrates directly into networked access control platforms.
• Wireless-reader compatibility eliminates hardwired credential line runs per door.