Sub categories

Showing Results for Infrastructure

Compare

Out of stock
NETGEAR

SKU: XSM4344FC-TAANES

NETGEAR M4350-40F4C Managed Switch TAA - XSM4344FC-TAANES
- 40 × 10G ports deliver 800 Gbps aggregate throughput with no oversubscription.
- TAA-compliant design meets federal procurement and ITAR contractor requirements.
- L3 management via CLI, Web GUI, and SNMP supports up to 4094 isolated VLANs.
$13,758.60 $9,463.99 Save $4,294.61

Add to Cart
The item has been added
Free shipping over $499

$13,758.60 $9,463.99 Save $4,294.61

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: XSM4344C-TAANES

NETGEAR M4350-40X4C Managed Switch TAA - XSM4344C-TAANES
- 40 multi-gig ports auto-negotiate 2.5G/5G/10G, preserving existing 1G cabling.
- Layer 3 routing with 802.1Q VLAN support isolates surveillance from other traffic.
- TAA-compliant unit managed via CLI, Web GUI, and SNMP for enterprise integration.
$20,855.16 $12,544.99 Save $8,310.17

Add to Cart
The item has been added
Free shipping over $499

$20,855.16 $12,544.99 Save $8,310.17

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: MSM4310-100NES

NETGEAR M4350-8M2V Managed Switch - MSM4310-100NES
- 8 PoE+ ports with 240 W total budget eliminate separate PSUs for cameras and APs.
- Dual 10G SFP+ uplinks handle aggregated 4K multi-stream backhaul without bottleneck.
- L3 managed platform enables VLAN isolation and QoS for segmented camera traffic.
$3,988.54 $2,628.99 Save $1,359.55

Add to Cart
The item has been added
Free shipping over $499

$3,988.54 $2,628.99 Save $1,359.55

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: MCAP321-10000S

NETGEAR MCAP321-10000S Meural Canvas II 21" Protective Cover
- Plastic enclosure shields the Meural Canvas II 21" from dust, impact, and moisture.
- Exact-fit design preserves wall and ceiling mounting points without modification.
- 5-year warranty backs hardware protection during transport, storage, and site relocation.
$49.95 $34.99 Save $14.96

Add to Cart
The item has been added
Free shipping over $499

$49.95 $34.99 Save $14.96

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: MCAS327-10000S

NETGEAR MCAS327-10000S Meural II Swivel Mount
- Swivel mechanism allows post-installation angle adjustment without tools or refastening.
- Supports both wall and ceiling mounting for flexible deployment in space-constrained areas.
- Lightweight plastic enclosure reduces structural load on drywall and suspended ceilings.
$77.51 $76.99 Save $0.52

Add to Cart
The item has been added
Free shipping over $499

$77.51 $76.99 Save $0.52

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: MH7150-100PAS

NETGEAR MH7150-100PAS NIGHTHAWK M7 5G Mobile Hotspot
- 5G-capable throughput supports video streaming and cloud uploads at remote or field sites.
- Dual-band Wi-Fi (2.4 GHz / 5 GHz) partitions device traffic to maintain predictable throughput.
- 4.1 / 4.6 dBi antenna gain improves reception through metal racking and concrete structures.
$775.84 $539.99 Save $235.85

Add to Cart
The item has been added
Free shipping over $499

$775.84 $539.99 Save $235.85

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: MHBTR10-10000S

Netgear MHBTR10-10000S
- 96 ports at true 10G line rate eliminate oversubscription across dense camera deployments.
- PoE++ (802.3bt) delivers up to 90W per port, powering cameras and APs over a single cable.
- Unmanaged architecture requires zero configuration, reducing commissioning time at remote sites.
$38.78 $26.99 Save $11.79

Add to Cart
The item has been added
Free shipping over $499

$38.78 $26.99 Save $11.79

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: MHPADPT-10000S

NETGEAR MHPADPT-10000S PD 27W Type-C Power Adapter
- Delivers 27W via USB-C to power NETGEAR MHS series switches reliably.
- Industrial-grade operating temp supports non-climate-controlled deployments.
- Wall and ceiling mount options simplify installation in space-constrained cabinets.
$18.97 $17.99 Save $0.98

Add to Cart
The item has been added
Free shipping over $499

$18.97 $17.99 Save $0.98

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: MK63S-100NAS

NETGEAR MK63S-100NAS Nighthawk Mesh WiFi 6 System
- WiFi 6 (802.11ax) delivers 10G aggregate throughput for dense concurrent device loads.
- PoE++ (802.3bt) with 81W budget powers cameras and access control without injectors.
- Unmanaged mesh with no controller or licensing — plug in and deploy immediately.
$465.50 $326.99 Save $138.51

Add to Cart
The item has been added
Free shipping over $499

$465.50 $326.99 Save $138.51

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: MK72-100NAS

Netgear MK72-100NAS 4PT NH Mesh DB AX3000 2 Pack
- Each node provides four Gigabit LAN ports for wired backhaul or direct device links.
- WiFi 6 (802.11ax) delivers ~3 Gbps aggregate across 2.4 GHz and 5 GHz bands.
- Compact 4.8"×4.8"×2.52" footprint fits equipment closets, racks, or shelving.
$356.88 $249.99 Save $106.89

Add to Cart
The item has been added
Free shipping over $499

$356.88 $249.99 Save $106.89

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: MR6520G-111PAS

Netgear MR6520G-111PAS Nighthawk M6 PRO 5G Router
- Six Gigabit Ethernet ports anchor NAS, workstations, and printers with deterministic latency.
- WiFi 6E tri-band (2.4/5/6 GHz) reduces interference for concurrent high-bandwidth wireless clients.
- C-Band 5G uplink delivers up to 1 Gbps throughput independent of fixed-line ISP infrastructure.
$827.57 $576.99 Save $250.58

Add to Cart
The item has been added
Free shipping over $499

$827.57 $576.99 Save $250.58

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: MS108EUP-100NAS

Netgear MS108EUP-100NAS
- Each of 8 ports delivers 2.5 Gbps throughput plus 95W PoE++, eliminating separate injectors.
- Managed via CLI, Web GUI, and VLAN support — isolate camera, IoT, and access control traffic.
- Wall and ceiling mounting options enable PoE distribution without dedicated rack space.
$479.36 $273.99 Save $205.37

Add to Cart
The item has been added
Free shipping over $499

$479.36 $273.99 Save $205.37

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: MS108UP-100NAS

Netgear MS108UP-100NAS
- All 8 ports deliver 2.5G throughput, eliminating bottlenecks on 4K IP camera feeds.
- PoE++ (802.3bt) supplies up to 95W per port, powering PTZ cameras and illuminators on one cable.
- Unmanaged plug-and-forward operation enables zero-config deployment at edge and warehouse sites.
$410.88 $234.99 Save $175.89

Add to Cart
The item has been added
Free shipping over $499

$410.88 $234.99 Save $175.89

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: MS308-100NAS

NETGEAR MS308-100NAS 8-Port MultiGig 2.5G Unmanaged Switch
- 8 x 2.5G MultiGig ports auto-negotiate 2.5G/1G/100M for mixed camera generations.
- PoE++ (802.3bt) on all 8 ports delivers up to 90W per port for high-draw endpoints.
- Unmanaged design powers on ready — no configuration needed for NVR or access control nodes.
$306.14 $140.99 Save $165.15

Add to Cart
The item has been added
Free shipping over $499

$306.14 $140.99 Save $165.15

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: MS510TXM-100NAS

NETGEAR MS510TXM-100NAS 10P MG Smart Managed Pro Switch
- 96 × 10G ports deliver 960 Gbps switching capacity for dense camera deployments.
- PoE++ (802.3bt) per port eliminates midspan injectors for PTZ cameras and readers.
- VLAN, QoS, and SNMP management isolate and prioritize real-time surveillance traffic.
$803.78 $471.99 Save $331.79

Add to Cart
The item has been added
Free shipping over $499

$803.78 $471.99 Save $331.79

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: MS70-100NAS

Netgear MS70-100NAS 2PT NH Mesh DB AX3000 Satellite
- Wired backhaul via 2x RJ45 isolates mesh traffic, preserving airtime for cameras and IoT.
- WiFi 6 (802.11ax) OFDMA and MU-MIMO reduce latency across high-density multi-device deployments.
- Dual-band AX3000 lets legacy devices anchor to 2.4 GHz while IP cameras use uncongested 5 GHz.
$232.74 $161.99 Save $70.75

Add to Cart
The item has been added
Free shipping over $499

$232.74 $161.99 Save $70.75

Add to quote Compare

Infrastructure

Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.

Plan Your Deployment

Total PoE power budget and port density requirements
Switch throughput and uplink capacity planning
Redundancy and failover design considerations
Distance limitations and fiber conversion needs
Power conditioning and voltage compatibility

PoE Planning Guide Get Sizing Help

What to Look For When Buying

The six decisions that matter most before you spec.

PoE Power Budget Math

A 24-port PoE+ switch with 370W total budget can't actually run 24 outdoor cameras at peak 25W each. Simultaneous peak — not nameplate — is the limit. Always verify per-port PoE allocation and total budget against actual camera load. See PoE budget planning and why your PoE switch fails after 18 cameras.

328-Foot Ethernet Limit

Cat5e, Cat6, and Cat6A all top out at 100 meters (328ft) per TIA-568. Past that, you need a media converter to fiber, a PoE extender, or an intermediate switch. Common gotcha: in-wall patch + faceplate + drop + jumper all count against 328ft. Long runs to perimeter cameras frequently exceed the limit — plan for fiber or coax-PoE extension.

Managed vs Unmanaged Switches

Unmanaged switches work for small deployments but provide no VLAN segmentation, no QoS for video traffic, no monitoring, and no remote troubleshooting. Managed switches (Layer 2 or Layer 3) let you isolate cameras on a dedicated VLAN, prioritize video over office traffic, and diagnose link failures from a central SNMP platform. Spec managed for any deployment over 8 cameras.

UPS Sizing & Runtime

NVR + switches + cameras + access control have very different power profiles than office gear. Size UPS for actual wattage of all connected loads + 20% headroom, and calculate runtime with battery-life curves (runtime is non-linear — doubling load often cuts runtime 60%+). Surveillance UPS should provide 15-30 min to accommodate generator transfer or graceful shutdown.

Copper vs Fiber Uplinks

In-rack uplinks on 10G copper (Cat6A) work fine for short runs. Between-building and multi-floor uplinks should be fiber — single-mode for >300m, multimode for under. Fiber is also electrically isolated, which matters in lightning-prone environments. Axis, Hanwha, and Ubiquiti switches include SFP/SFP+ uplinks across most models.

Cooling & Airflow in Racks

Surveillance gear runs 24/7 — a closed rack at 90°F interior temperature will fail drives and switches faster than spec. Specify perforated doors, rack-mount fans, and leave 1U of airflow gap above/below heat-generating equipment. NVRs with internal fans need front-to-back airflow; network switches vary by vendor. Check thermal spec before sealing a wall-mount enclosure.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

802.3af / at / bt PoE Standards

802.3af = 15.4W/port (entry cameras), 802.3at PoE+ = 25.5W/port (most outdoor cameras), 802.3bt PoE++ Type 3 = 60W, Type 4 = 90W (PTZ, heated, multi-sensor). Specify switch support for the highest standard your cameras need — future-proofing with PoE++ switches costs marginally more.

TIA-568 Cabling Standards

Cat5e rated to 1 Gbps at 100m. Cat6 rated to 10 Gbps at 55m, 1 Gbps at 100m. Cat6A rated to 10 Gbps at 100m with proper grounding. Use Cat6A for new surveillance cabling runs — marginal cost premium over Cat6, meaningful margin for long runs + high PoE.

SFP / SFP+ / QSFP+ Modules

Small Form-factor Pluggable optics for fiber uplinks. SFP = 1 Gbps, SFP+ = 10 Gbps, QSFP+ = 40 Gbps. Match module to switch vendor compatibility (some vendors lock to their own brand of optics). Multimode fiber with OM3/OM4 for ≤300m, single-mode for longer or future-proof runs.

VLAN Segmentation

Dedicated VLAN for surveillance isolates camera traffic from office network — improves security (camera-to-camera lateral movement blocked), performance (no contention with office traffic), and troubleshooting. Configure access-control and intercom VLANs separately. Managed switches required; unmanaged switches cannot segment.

Long-Reach PoE Extension

Ethernet-over-Coax (EoC) extends Ethernet + PoE to 1,500+ feet over existing RG59 coax — ideal for analog-to-IP retrofits. Ethernet-over-UTP extenders push runs to 4,000ft over CAT cable. NVT Phybridge CHARIoT, Altronix eBridge, and Veracity Highwire are the common product families. Rate-limited to 100 Mbps typically.

UPS Topology: Line-Interactive vs Double-Conversion

Line-interactive UPS switch to battery on power failure — sufficient for office gear. Double-conversion (online) UPS convert AC→DC→AC continuously, providing perfectly conditioned power — required for sensitive SCADA/security gear in dirty-power environments. Specify double-conversion for NVRs at critical sites.

Typical Deployment Scenarios

8-Camera Single-Site Retrofit

Existing network + 8 outdoor IP cameras. Add a 16-port managed PoE+ switch (Ubiquiti UniFi, Axis T85) on a dedicated VLAN. 1U rack UPS for the NVR + switch. 120-160 watts total PoE budget comfortably runs 8 outdoor cameras with heater + IR.

48-Camera Campus Upgrade

Four buildings, 48 cameras total, existing fiber backbone. Per-building 24-port PoE++ switch with SFP+ fiber uplink to core. Dedicated surveillance VLAN, QoS for video traffic, SNMP monitoring. 2-post relay rack in each IDF closet with dedicated surveillance UPS.

Perimeter Fence Line (1,200ft)

6 bullet cameras + 2 PTZs along perimeter fence, main NVR in building. Fiber media converter + outdoor-rated fiber to a PoE++ switch in a weatherproof enclosure at the fence line. Alternative: NVT Phybridge CHARIoT over existing coax for retrofit applications.

Multi-Floor Office Tower

Stacked IDFs on every floor, cameras + access control + intercom on dedicated VLANs. Cisco Catalyst or Ubiquiti UniFi Pro managed switches per floor with 10G fiber uplink to building core. Per-IDF 3U UPS. Integration with VMS and access control head-end at main BDF.

Frequently Asked Questions

How do I calculate PoE budget for a camera deployment?

Sum the peak wattage of every camera (not nameplate — check spec sheet for "PoE class" or "max consumption"). Add 15-20% headroom for inrush during cold-start. The result is your required simultaneous-peak PoE budget. A 24-port PoE+ switch advertised at 370W can only run about 18 outdoor cameras with heaters + IR — see PoE budget planning.

What's the maximum Ethernet cable run for an IP camera?

100 meters (328 feet) per TIA-568 — total distance from switch port to camera port. That includes in-rack patch cords, in-wall cabling, faceplate jack, and camera jumper. For longer runs, use fiber with a media converter or a long-reach PoE extender. Going past 328ft on copper causes intermittent packet loss that looks like camera problems.

Do I need managed or unmanaged PoE switches?

For more than 8 cameras or any mixed-use network (cameras sharing infrastructure with office traffic), specify managed. VLAN segmentation isolates camera traffic for security and performance; QoS ensures video gets bandwidth priority; SNMP monitoring surfaces failures before users call. Unmanaged switches are acceptable only for small standalone deployments.

What UPS runtime should I plan for an NVR + switch?

15-30 minutes of runtime at actual load is typical — enough to ride through brief outages or allow graceful shutdown before battery exhaustion. For sites with generator transfer, 5-10 minutes is sufficient. Size UPS wattage for actual connected load + 20%, and use the vendor's runtime-at-load curve (runtime is non-linear). Double-conversion UPS for sensitive or dirty-power sites.

How far can I extend PoE past 328 feet?

Ethernet-over-Coax extenders (NVT Phybridge CHARIoT, Altronix eBridge) push Ethernet + PoE to 1,500+ feet over existing RG59/RG6 coax — ideal for analog-to-IP retrofits. UTP-based extenders reach 2,000-4,000 feet on Cat cable at reduced bandwidth (typically 100 Mbps). For new runs over 328ft, fiber + PoE switch at the camera end is usually cleaner architecture.

Should I put cameras on a separate VLAN?

Yes — always. A dedicated camera VLAN isolates camera traffic from office network for security (blocks camera-to-camera lateral movement if one is compromised), performance (cameras don't contend with office bandwidth), and troubleshooting (camera traffic is cleanly separated for packet capture). Requires managed switches; takes 10 minutes to configure on Ubiquiti UniFi, Cisco Catalyst, or any enterprise switch.

Sub categories

Showing Results for Infrastructure

Infrastructure

Plan Your Deployment

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading