Code Blue · CB6S00226

Code Blue CB6S00226 CB6s GWT BLEm NP PoE Network Switch

PoE-enabled network switch component designed for Code Blue CB6s series unified security and communication platforms

• Delivers PoE power over Ethernet, eliminating separate power drops for cameras and readers.
• Operates across 12–24V DC, integrating with both legacy and modern DC power infrastructures.
• Native CB6s series component requires no adapter cards or firmware patches to commission.

Code Blue · CB9S00112

Code Blue CB9S00112 GWT BLEm NP 24V Gateway

Bluetooth Low Energy gateway module designed to extend wireless device connectivity across Code Blue paging and alert infrastructure

• BLE gateway bridges Code Blue paging amplifiers to mobile, wearable, and access-control endpoints.
• Operates on 12–24V DC, sharing existing security power supplies without additional conditioning hardware.
• Retrofit module preserves analog audio output while adding BLE device enrollment to CB9s paging systems.

Code Blue · CB9S00122

Code Blue CB9S00122 CB9s SBL WEm NP PoE Switch

Network switch engineered for distributed PoE power delivery in security and access-control installations

• Operates on 12–24V DC input, fitting legacy or hybrid-voltage security cabinets.
• Delivers PoE over standard Ethernet, combining data and power on a single cable run.
• Vendor-neutral Ethernet switching integrates with any ONVIF camera or access-control device.

Code Blue · CB9S00123

Code Blue CB9S00123 Network Switch

Managed network switch designed for security and access-control installations requiring integrated Power over Ethernet (PoE) delivery

• Managed Layer-2 PoE switch for Code Blue IP communication deployments
• Built-in PoE injection eliminates external injectors and 12V supplies
• Drops into existing Code Blue network deployment rack architecture

Code Blue · CB9S00131

Code Blue CB9S00131 CB9s SYL NG NP PoE Network Switch

Network switch component designed to deliver Power over Ethernet (PoE) connectivity for integrated security and communication systems

• PoE delivery over standard RJ45 eliminates separate power runs to CB9s endpoints.
• Supports 12V DC operation, integrating legacy paging infrastructure without adapters.
• Purpose-built for CB9s series, ensuring protocol alignment across audio and paging zones.

Code Blue · CB9S00132

Code Blue CB9S00132 Network Switch

Network switch accessory and replacement component designed to integrate PoE (Power over Ethernet) connectivity into Code Blue CB9s series security

• Delivers PoE power and data over Ethernet, eliminating separate power runs to endpoints.
• Operates on 24V DC input, integrating cleanly with existing UPS and backup power systems.
• Drop-in replacement for CB9s series infrastructure with no protocol or firmware changes required.

Code Blue · CB9S00139

Code Blue CB9S00139 Network Switch

Managed network switch designed for security and surveillance deployments requiring centralized PoE power distribution and deterministic switching

• PoE over Ethernet eliminates separate DC runs, cutting cable labor on multi-device deployments.
• Dual 12–24V DC inputs with automatic failover sustain PoE delivery through a single-supply failure.
• L2/L3 managed switching with VLAN and QoS isolates video traffic from access-control data streams.

Code Blue · CB9S00184

Code Blue CB9S00184 PoE Ethernet Cable IP68

IP68 sealed PoE Ethernet cable for outdoor network & surveillance

• RJ45 sealed connectors with IP68 rating block dust and moisture ingress
• PoE 802.3af support delivers power and data over single cable run
• Built to NEMA 4 for outdoor and industrial deployment environments

Code Blue · CBRT00044

Code Blue CBRT00044 DBZ WEm NP PoE Network Switch

PoE-enabled network switch engineered to consolidate power delivery and data connectivity across distributed security and emergency communication

• Delivers PoE power and data over a single cable run, reducing wiring complexity.
• Accepts 12–24V DC input, eliminating reconfiguration when field power sources vary.
• Integrates natively with Code Blue paging amplifiers and IP emergency endpoints.

Code Blue · CBRT00050

Code Blue CBRT00050 Network Switch

Network switch designed to support surveillance infrastructure with integrated PoE (Power over Ethernet) capability

• PoE support delivers data and power over a single cable, reducing installation runs.
• Ethernet connectivity integrates directly into standard security network infrastructure.
• Compatible with Code Blue audio and paging components for unified system deployment.

Code Blue · CBRT00051

Code Blue CBRT00051 SRD BLEm NP PoE Network Switch

PoE-enabled network switch module designed to integrate Bluetooth Low Energy wireless connectivity into distributed security and access control

• Integrated BLE module eliminates separate wireless gateways for mobile credential deployments.
• 802.3af/at PoE power input removes endpoint power supplies, simplifying cabling at each node.
• 12–24V DC input range supports both legacy 12V and modern 24V PoE+ control system retrofits.

Code Blue · SLNP0107

Code Blue Ethernet PoE Extender Copper - SLNP0107

N Ethernet PoE extender designed to distribute power and data across copper-based network infrastructure

• Extends PoE power over copper CAT5e/CAT6 runs, eliminating separate power supply drops.
• Integrated audio input supports mics and paging amplifiers on the same copper endpoint.
• Wall, pole, recessed, and rack mount options suit mixed indoor/outdoor deployments.

Code Blue · SLNP0033

Code Blue Hardened SFP Transceiver - SLNP0033

Hardened SFP (Small Form-Factor Pluggable) transceiver engineered for surveillance-grade fiber-optic networking in outdoor, industrial, and

• Hot-swappable SFP form factor enables field upgrades without full system shutdown.
• Fiber-optic link eliminates ground-loop noise and EMI on long outdoor campus runs.
• Hardened build withstands temperature extremes and electrical transients in perimeter deployments.

Code Blue · QT192308

Code Blue QT192308 PoE Ethernet Cable Assembly

IP68 PoE ethernet cable for outdoor security cameras and access control

• 802.3af PoE standard powers networked devices without separate power runs
• IP68 dust and immersion rating withstands moisture and harsh outdoor conditions
• RJ45 connectors integrate with standard PoE infrastructure and security appliances

Code Blue · SLNF0150

Code Blue SLNF0150 CB2a PoE Network Switch

4-port PoE network switch engineered for outdoor and industrial security deployments where rugged construction and simplified power delivery matter

• 4-port PoE switch delivers data and power over a single cable per device.
• Stainless steel enclosure resists corrosion in coastal, washdown, and UV environments.
• 12–24V DC input accepts battery, solar, and redundant feeds without extra converters.

Code Blue · SLNF0199

Code Blue SLNF0199 CB2e BSLCC WEm NP 4G LTE PoE Network Switch

Cellular-integrated network switch engineered for security and access-control deployments where primary WAN failover and consolidated power

• Integrated 4G LTE modem triggers automatic WAN failover, keeping alarms live on outage.
• PoE delivery over Ethernet consolidates power and data to cameras and controllers on one cable.
• Factory-configured for Code Blue platforms; deploys without third-party drivers or firmware flashing.

Code Blue · SLNF0201

Code Blue SLNF0201 CB1e SBL WEm NP 4G/LTE PoE Network Switch

Field-hardened network switch engineered for surveillance deployments where you cannot rely on traditional wired Ethernet alone

• 4G/LTE cellular failover maintains connectivity when wired infrastructure fails.
• PoE delivery powers connected devices over a single cable, reducing installation complexity.
• Compact form factor suits space-constrained enclosures in remote or distributed deployments.

Code Blue · SLNF0203

Code Blue SLNF0203 CB2a SS BLEm NP 4G PoE Network Switch

Network switch designed for surveillance and remote site deployments where PoE power delivery and cellular connectivity matter

• PoE support delivers data and power over a single cable, reducing installation complexity.
• 4G cellular connectivity provides network uptime independent of wired infrastructure.
• Stainless steel housing withstands outdoor and harsh-environment deployments long-term.

Code Blue · SLNF0291

Code Blue SLNF0291 CB4r SBL WEm NP PoE 4GLTE Network Switch

• IP66-rated enclosure supports outdoor and non-climate-controlled site deployments.
• Built-in 4G LTE modem delivers automatic WAN failover, keeping access-control traffic online.
• 12–24V DC input integrates with UPS battery backup common in access-control infrastructure.

Code Blue · SLNF0303

Code Blue SLNF0303 CB2e SBL WEm NP PoE 4G LTE Network Switch

Managed network switch engineered for security and access-control deployments where network failure cannot interrupt video, intercom, or door-control

• Integrated 4G LTE failover maintains video and door control during primary link loss.
• PoE output powers cameras, intercoms, and readers without separate power runs.
• Wall, pole, recessed, and rack mounting options simplify deployment in any facility type.

Code Blue · SLNF0304

Code Blue SLNF0304 CB6s Network Switch

Network switch designed for distributed IP security and access-control deployments where hardwired Ethernet infrastructure is limited or multi-site

• Integrated 4G/LTE uplink delivers wireless failover where hardwired WAN is unavailable.
• PoE output eliminates separate power runs to cameras, readers, and intercom endpoints.
• 12–24V DC input operates directly from alarm-panel or industrial DC supplies.

Code Blue · SLNF0306

Code Blue SLNF0306 CB6s Gateway 4G/LTE 24V

Cellular gateway designed to provide 4G/LTE backup connectivity for distributed security and alarm systems operating on 24V DC power infrastructure

• 4G/LTE cellular backup maintains system heartbeat when primary Ethernet fails.
• 24V DC input integrates directly with existing alarm cabinet power rails.
• Carrier-agnostic band selection supports multi-site deployments across regions.

Code Blue · SLNF0343

Code Blue SLNF0343 CB2e SS WEm NP 4G LTE PoE Network Switch

Network switch built to handle surveillance deployments in remote or infrastructure-limited locations

• Integrated 4G LTE provides cellular redundancy for remote or distributed deployments.
• PoE support simplifies wiring by delivering power and data over a single Ethernet run.
• Stainless steel housing suits harsh-environment installations requiring long-term durability.

Code Blue · SLNF0349

Code Blue SLNF0349 CB2e SS BLEm NP PoE 4G LTE Network Switch

Managed network switch purpose-built for emergency communications and critical infrastructure deployments where wired backhaul redundancy and

• Integrated 4G LTE modem delivers automatic WAN failover, keeping emergency comms online.
• PoE output eliminates per-device power runs for IP phones, intercoms, and access control.
• IP66-rated stainless steel housing supports outdoor, washdown, and salt-spray installations.

Code Blue · SLNF0399

Code Blue SLNF0399 CB5s SBL WEm NP 4G/LTE PoE Network Switch

PoE-enabled network switch designed to consolidate power delivery and data routing in surveillance and access control deployments where mixed power

• Managed PoE switching eliminates separate power supplies for connected IP devices.
• 4G/LTE connectivity enables remote monitoring and management at off-grid sites.
• Compact form factor suits equipment rack integration in professional security installs.

Code Blue · SLNH0056

Code Blue SLNH0056 Nebula Consumer Cloud Router

IP68 cloud router with PoE power for remote outdoor deployments

• IP68-rated enclosure handles dust and water ingress in outdoor cabinets
• PoE (802.3af) power eliminates need for dedicated AC runs in field
• Cloud/cellular connectivity for remote cameras, access control, and IoT

Code Blue · SLNP0001

Code Blue SLNP0001 4 Port FXS/VoIP Gateway

4-port FXS/VoIP gateway with IP68 sealing for indoor/outdoor analog-to-SIP bridging

• 4 analog telephone lines with SIP-based VoIP network integration for legacy system modernization
• IP68 dust and water sealing supports challenging outdoor and harsh environment deployments
• PoE (802.3af) powered—no dedicated power infrastructure required for field installation

Code Blue · SLNP0002

Code Blue SLNP0002 8 Port FXS/VoIP Gateway

8-port FXS/VoIP gateway with IP68 sealing and PoE power

• 8 FXS ports bridge analog phones and fax to SIP-based VoIP networks
• IP68 sealed enclosure withstands dust and moisture in field deployments
• PoE (802.3af) powered—no separate power infrastructure required

Code Blue · SLNP0003

Code Blue SLNP0003 24 Port FXS/VoIP Gateway

24-port FXS/VoIP gateway with IP68 rating for indoor/outdoor analog-to-digital bridging

• 24 FXS ports convert legacy analog endpoints to SIP-based VoIP on single gateway
• IP68-rated stainless steel housing handles dust and water in harsh environments
• PoE (802.3af) powers entire gateway, eliminating separate power infrastructure

Code Blue · SLNP0005

Code Blue SLNP0005 300 VPN Connection Router

300 VPN router with IP68 rating for remote surveillance deployments

• Supports 300 concurrent VPN connections for distributed site networks
• IP68-rated construction withstands dust and moisture in outdoor cabinets
• PoE (802.3af) powered—no separate infrastructure needed at remote sites

Code Blue · SLNP0006

Code Blue SLNP0006 4G/LTE Cellular Router Kit

4G/LTE cellular router kit for CB1-w systems with IP68 weatherproofing

• 4G/LTE connectivity for CB1-w deployments in remote locations
• IP68-rated housing withstands dust and moisture in outdoor environments
• PoE (802.3af) power eliminates need for separate electrical infrastructure

Code Blue · SLNP0008

Code Blue SLNP0008 VPN Enterprise Router 30peers

VPN enterprise router designed to handle 30 concurrent peer connections in distributed surveillance architectures

• Supports 30 simultaneous VPN peer connections for distributed enterprise deployments.
• Enables encrypted site-to-site and remote-access tunneling across multiple locations.
• Integrates into existing enterprise security infrastructure with standard network configs.

Code Blue · SLNP0009

Code Blue SLNP0009 VPN Enterprise Router 50peers

VPN enterprise router designed to establish secure, encrypted tunnels across distributed surveillance networks

• Supports up to 50 concurrent VPN peer tunnels for multi-site enterprise deployments.
• Enterprise-class encryption secures traffic across branch offices and remote locations.
• Scalable architecture with redundancy and failover capabilities for mission-critical uptime.

Code Blue · SLNP0012

Code Blue SLNP0012 4G/LTE Cell Router

IP68 4G/LTE router with PoE power for remote surveillance

• 300 Mbps / 50 Mbps 4G/LTE backhaul supports multiple IP cameras without wired infrastructure.
• IP68-rated enclosure withstands full immersion, dust, and washdown for harsh outdoor installs.
• 802.3af PoE input eliminates dedicated AC runs, simplifying pole and cabinet deployments.

Code Blue · SLNP0022

Code Blue SLNP0022 4G/LTE Ruggedized Cellular Router Kit

IP68 4G/LTE router kit for field deployment in harsh outdoor environments

• IP68-rated construction handles dust and water immersion for outdoor use
• 4G/LTE connectivity up to 300 Mbps for remote monitoring and backhaul
• PoE powered (802.3af) with -40°F to 149°F operating range

Code Blue · SLNP0023

Code Blue SLNP0023 2 Port FXO/VoIP Gateway

2-port FXO/VoIP gateway bridges analog lines to SIP-based systems

• Dual FXO ports connect legacy analog circuits to modern VoIP platforms
• PoE (802.3af) power eliminates separate power infrastructure on-site
• IP68 rating handles demanding installation environments reliably