Door Hardware & I/O
Sub categories
Showing Results for Door Hardware & I/O
-
Camden
SKU: CX-ED2071
Camden CX-ED2071 Electric Strike
- Grade 2 ANSI A156.31 rated at 1,000 lbs static holding force for commercial frames.
- Dual-voltage 8V/16V AC/DC input eliminates separate power supplies on most door controllers.
- Field-selectable fail-safe/fail-secure mode lets you match egress or security policy per door.
$215.00 $129.99 Save $85.01The item has been added -
Camden
SKU: CX-ED2071-BK
Camden CX-ED2071-BK Electric Strike
- Field-selectable 8V or 16V AC/DC eliminates voltage-matching hardware swaps on site.
- Fail-safe or fail-secure mode switchable in the field to meet code or policy changes.
- 1,000 lb static hold and 700,000-cycle rating supports high-traffic commercial deployments.
$226.00 $136.99 Save $89.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CX-ED2079
Camden CX-ED2079 Electric Strike
- Field-selectable 12/24V AC/DC input fits existing controller outputs without rewiring.
- Grade 2 ANSI A156.31 rated: 1,000 lb static and 50 ft-lb dynamic holding strength.
- Fail-safe or fail-secure mode is mechanically switchable on-site, no rewiring needed.
$205.00 $123.99 Save $81.01The item has been added -
Camden
SKU: CX-ED2079-1-BK
Camden CX-ED2079-1-BK Electric Strike
- Field-selectable 12VDC or 24VAC/VDC eliminates hardware swaps when mixing legacy and modern panels.
- 1,000 lbs static holding force meets ANSI/BHMA A156.25 Grade 2 for single-leaf commercial doors.
- Three included stainless faceplates (ESP1B, ESP3B, ESP4B) cover beveled and straight frames in retrofits.
$211.00 $127.99 Save $83.01The item has been added -
Camden
SKU: CX-ED2079-BK
Camden CX-ED2079-BK Electric Strike
12VDC electric strike for standard door frame access control
- 12VDC operation integrates with most distributed access control power supplies
- Mounts directly to standard door frame for straightforward installation
- Designed for commercial and institutional entry control applications
$226.00 $136.99 Save $89.01The item has been added -
Camden
SKU: CX-EPD-2010L
Camden CX-EPD-2010L ANSI Square Electric Strike
- ANSI square profile fits standard commercial door frame cutouts without modification.
- TCP/IP and PoE connectivity enables centralized remote management across facility networks.
- 5-year warranty backs heavy-duty stainless steel construction for high-cycle deployments.
$530.00 $319.99 Save $210.01The item has been added -
Camden
SKU: CX-EPD-2020L
Camden CX-EPD-2020L ANSI Round Electric Strike
- TCP/IP communication enables centralized remote unlock within IP-based access control systems.
- ANSI round form factor supports standard door preparations, simplifying retrofit deployments.
- 5-year warranty and non-handed design reduce long-term maintenance and inventory overhead.
$530.00 $319.99 Save $210.01The item has been added -
Camden
SKU: CX-EPD-2040L
Camden CX-EPD-2040L Electronic Door Strike
- TCP/IP connectivity integrates directly with networked access control systems, no relay required.
- Non-handed design installs left or right, reducing SKU count across multi-door deployments.
- Removable latch monitoring switch enables real-time door status feedback to the access panel.
$530.00 $318.99 Save $211.01The item has been added -
Camden
SKU: CX-EPD0009
Camden CX-EPD0009 Magnetic Cabinet Lock
- 440 lb holding force secures loaded equipment cabinets and high-value enclosures.
- Selectable 12V or 24VDC input integrates into legacy or modern control architectures.
- 60mA draw at 12VDC simplifies relay sizing across distributed access control deployments.
$210.00 $127.99 Save $82.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CX-MA0610
Camden CX-MA0610 L Bracket for 600 lb. Magnetic Lock
- L-bracket geometry solves angled or offset frame mounting for 600 lb mag locks.
- Engineered for 24VDC magnetic lock assemblies in commercial and institutional installs.
- Rated for indoor use from 0°C to 55°C, maintaining full holding-force alignment.
$53.99The item has been added -
Camden
SKU: CX-MA0610D
Camden CX-MA0610D L Bracket Double Door 600 lb Magnetic Lock
- L-bracket assembly aligns armature to strike precisely on double-door 600 lb mag lock installs.
- Rated for 600 lb holding force; supports Camden CX-91 and CX-92 magnetic lock series.
- Operates on 24VDC across 0°C–55°C, suitable for controlled commercial access environments.
$106.99The item has been added -
Add to Cart The item has been addedCamden
SKU: CX-MA0612
Camden CX-MA0612 Armature Housing for Magnetic Lock
- Provides strike-side mounting interface for 600 lb rated magnetic lock installations.
- Operates on 24VDC, compatible with standard armature plate geometry across lock families.
- All-metal housing mounts directly to wood, metal, or composite door frames via supplied fasteners.
$52.99The item has been added -
Add to Cart The item has been addedCamden
SKU: CX-MA0613
Camden CX-MA0613 L & Z Bracket for 600 lb Magnetic Lock
- L & Z bracket geometry supports both horizontal and vertical frame mounting orientations.
- Rated for 600 lb magnetic lock capacity, ensuring full holding force transfer to structure.
- Passive, non-electrical assembly simplifies installation with no power connections required.
$94.99The item has been added -
Add to Cart The item has been addedCamden
SKU: CX-MA0614-12
Camden CX-MA0614-12 1/2" Filler Plate for 600 lb. Magnetic Lock
- Bridges frame gaps on 600 lb. magnetic lock installs without modifying the door frame.
- Maintains magnet-to-armature air gap within spec, preserving full 600 lb. holding force.
- Mounts using existing lock body fasteners — no additional hardware required.
$35.99The item has been added -
Camden
SKU: CX-MA0614-25
Camden CX-MA0614-25 1" Spacer Plate for Magnetic Lock
- 1-inch standoff corrects alignment on non-standard frames to maintain full armature contact.
- Compatible with 600 lb magnetic lock systems running at 24VDC for consistent holding force.
- Shares the same fastener pattern as the lock body, simplifying retrofit and new installations.
$56.99The item has been added -
Camden
SKU: CX-MA0614-25D
Camden CX-MA0614-25D 1" Spacer Plate for 600 lb Magnetic Lock
- Provides exact 1" standoff for 600 lb magnetic lock bodies on non-flush frame surfaces.
- Installs using existing lock fasteners—no additional drilling or hardware required.
- Stainless steel construction resists corrosion in commercial indoor environments.
$133.99The item has been added
Door Hardware & I/O
Door hardware and I/O components connect physical doors to your access control system. From electric strikes and magnetic locks to exit devices and relay modules, proper hardware selection ensures safe, compliant, and reliable operation.
Plan Your Deployment
- Fail-safe vs fail-secure lock configuration
- Door type (wood, metal, glass, storefront)
- Request-to-exit (REX) device requirements
- Power supply and voltage compatibility
- Local life-safety and fire code compliance
Door Hardware & I/O — Engineering-Grade Door Hardware for Commercial Deployments
This category covers 532 working models of door hardware & i/o sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Fail-safe versus fail-secure determines what happens during power loss. Fail-safe locks unlock on power loss (used on egress doors where life safety dominates); fail-secure locks remain locked (used on storage, server rooms, and exterior doors where security dominates). Code typically mandates fail-safe on stairwell and egress doors. Confirm with the AHJ before specifying — misapplied lock mode is a common code violation.
Strike, mortise, magnetic lock, and electrified panic hardware each have distinct installation, current draw, and code implications. Electric strikes work with most mechanical locksets and are easiest to retrofit. Magnetic locks (maglocks) provide high holding force on glass and wood doors but require dedicated REX and panic-bar interfaces for egress compliance. Verify the door's existing prep before choosing.
Power draw and inrush current dictate power supply sizing. A 5-door system with 1A peak per lock can exceed an undersized 12VDC supply at simultaneous lock-down events. Account for accessories — REX motion sensors, door-position switches, electrified levers — when sizing the supply and the battery backup required for code compliance.
Tamper switches, door-position monitoring, and request-to-exit sensors generate the audit trail your security team needs. Mechanical contact switches are cheaper; magnetic reed switches resist tampering better. Pair each door with a position switch and a REX sensor at minimum — without door-position monitoring, you can't distinguish 'authorized entry' from 'door held open after authorized entry,' which is a common compliance gap.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 8MP, 2MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired |
| Power | AC/DC, Battery |
| Type | Accessory, Controller, Cable, Switch, Power Supply, Access Card, Contact, Lock/Strike |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Fail-safe or fail-secure for stairwell doors?
Fail-safe is mandatory on most stairwell doors and other code-designated egress paths — the lock must release on fire alarm or power loss to allow evacuation. Fail-secure on those doors is a code violation. Confirm the local fire code and AHJ requirements; commercial buildings in the U.S. follow NFPA 101 and the International Building Code, both of which detail egress lock behavior in detail.
What current draw should I plan for electrified locks?
Typical 12VDC electric strikes draw 200-500 mA continuous, with inrush spikes of 1-2A at engagement. Magnetic locks rated for 1,200 lbs holding force draw around 500 mA continuous at 24VDC. Power supplies need to handle simultaneous lock-down current — emergency lockdown events activate all locks at once. Size the supply with at least 25% headroom and confirm battery backup runtime requirements.
Do I need a request-to-exit (REX) sensor?
Most code-compliant electrified door installations require a REX sensor to shunt the alarm during authorized egress. Without REX, every egress event registers as a forced-door alarm. PIR motion sensors are the common choice and integrate with the door controller's REX input. Mechanical push-bar REX is also acceptable for hardware that includes that switch natively.
Can I use one lock for both card and mechanical key entry?
Yes — most electrified strikes and locks allow mechanical key override on the same door. Maintaining a master key for emergency mechanical access is required by code in many jurisdictions and recommended in all. Document the master key holders carefully; an uncontrolled master key program undermines the electronic audit trail.
What's the lifespan of a magnetic lock?
Quality maglocks (Securitron M62, HES, von Duprin) typically last 15-20 years with no mechanical wear. Failure points are the connector, the armature plate-to-lock alignment, and contamination of the magnetic face. Plan for armature replacement at year 10 as a hedge against alignment drift. Strike-type locks with mechanical parts last 5-10 years before strike-plate wear becomes a reliability issue.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.