Camden · CM-830

Camden CM-830 SPDT Momentary Lock/Strike

• 20A switching capacity drives strikes and maglocks directly — no relay module required.
• Dual 12/24V DC compatibility simplifies integration with existing access control power rails.
• 100,000-cycle mechanical rating supports high-traffic release points without premature failure.

Camden · CM-840

Camden CM-840 SPST Maintained Lock Strike

• SPST maintained-contact relay for constant-power unlock applications
• 20A switching capacity at 30VDC drives mag locks and strikes
• Compact 2.50 x 2.25 x 1.38 in housing with NEMA-rated enclosure

Camden · CM-850

Camden CM-850 Remote Door Release Switch SPDT

SPDT remote door release for 12VDC electromagnetic locks and strikes

• SPDT contact mode controls strike energization and auxiliary circuits simultaneously
• Momentary and maintained operating modes for flexible access control timing
• Direct integration with HID readers on 12VDC control power—no relay module needed

Camden · CM-9000/10N

Camden CM-9000/10N Steel Flush Momentary Strike

• All-metal flush-mount construction resists vandalism in schools, hospitals, and secure perimeters.
• DPDT relay switches two circuits simultaneously—no extra relays needed for strike plus alarm shunt.
• Rated 6A @ 30VDC; compatible with EM strikes, electric deadbolts, and door operator control circuits.

Camden · CM-9000/15N

Camden CM-9000/15N Steel Flush Maintained Strike

• Maintained 30VDC operation holds bolt continuously until power is removed.
• Flush-mounted 7/8" steel body reduces tamper exposure in high-traffic frames.
• Scales to 45 door positions per panel for campus or multi-tenant deployments.

Camden · CM-9080

Camden CM-9080 DPDT Momentary Electronic Strike

• DPDT momentary relay delivers clean pulse-in/activation-out with no latching state drift.
• 30VDC / 6A rating supports standard strikes and maglocks on legacy and modern controllers.
• Color-coded 18 AWG spade leads connect directly to relay outputs—no adapters required.

Camden · CM-9080PTE

Camden CM-9080PTE DPDT Momentary Strike

• DPDT contact logic controls both energize and de-energize from one device, cutting relay count.
• 30VDC / 6A inrush rating integrates directly with standard access control panels, no conditioner needed.
• Recessed brushed aluminum faceplate with countersunk button resists pry attacks and blunt-force impact.

Camden · CM-9090

Camden CM-9090 DPDT Maintained Strike Lock

• Maintained DPDT operation holds the strike unlocked for the full access signal duration.
• Rated 6 A at 30VDC, matching standard access control power supplies with no voltage conversion.
• UL/CSA approved for North American life-safety, egress, and ingress control installations.

Camden · CM-9180

Camden CM-9180 DPDT Momentary Lock/Strike

• Fail-secure design keeps the door locked on power loss or signal drop.
• DPDT momentary contact at 30VDC/6A eliminates continuous duty cycle overhead.
• 1/4-inch aluminum faceplate with countersunk construction resists tampering.

Camden · CM-9180PTE

Camden CM-9180PTE DPDT Momentary Strike

• DPDT momentary relay auto de-energizes after pulse, reducing thermal stress on locks.
• Rated 6A at 30VDC, supporting standard electric strike and EM lock loads directly.
• 1/4" aluminum faceplate and countersunk steel pushbutton resist tampering in high-traffic sites.

Camden · CM-9190

Camden CM-9190 DPDT Maintained Strike

• DPDT maintained contact holds state until commanded, reducing false-release events.
• 30VDC operation lowers shock risk and reduces load on access control power supplies.
• TCP/IP connectivity enables remote actuation and audit logging without relay panels.

Camden · CM-9600

Camden CM-9600 Illuminated Piezoelectric Push Button

• Piezoelectric actuation eliminates moving parts, removing wear-out cycles in high-traffic installs.
• IP66-rated stainless steel faceplate suits exterior and vandal-prone sites without extra housings.
• Field-selectable N/O and N/C relay contacts support fail-safe and fail-secure configurations.

Camden · CM-9610

Camden CM-9610 Illuminated Piezoelectric Push Button

• Solid-state piezoelectric mechanism eliminates mechanical wear for reliable 24/7 RTE duty.
• Field-selectable N/O or N/C dry contact (2A @ 30VDC) via jumper—no module swaps needed.
• Red/green/off LED and 24VDC supply integrate directly with strikes, mag-locks, and operators.

Camden · CM-9800/3

Camden CM-9800/3 Exit Button Controller

Networked exit button controller with TCP/IP and 24VDC for centralized access management

• TCP/IP connectivity integrates with IP-enabled access control systems across distributed locations
• Supports up to 10 concurrent users on single 24VDC power supply for multi-user installations
• Wall-mounted IP66-rated design handles indoor and outdoor access control environments

Camden · CM-9800/7

Camden CM-9800/7 Exit Button Controller

• IP66-rated housing survives direct spray and dust without a separate weatherproof enclosure.
• Form C relay output at 24VDC/2A integrates directly with mag-locks, strikes, and access panels.
• Adjustable 0–60 s hold-open timer coordinates multi-strike lock sequences without extra modules.

Camden · CM-AF500

Camden CM-AF500 Single Gang LED Illuminated Annunciator

• Display remains dark when off, eliminating visual cues that enable tailgating.
• Field-selectable 12/30V AC/DC integrates directly into existing low-voltage circuits.
• Single-gang form factor mounts flush in standard boxes alongside readers and buttons.

Camden · CM-AF501SO

Camden CM-AF501SO Single Gang LED Annunciator with Adjustable

• Operates on 12/24V AC/DC (±10%), eliminating separate supply transformers on most installs.
• Mounts to any standard single gang box with 9/18" depth, simplifying retrofit into tight wall cavities.
• Compatible with electric strikes, electromagnetic locks, and electric door operators via relay output wiring.

Camden · CM-AF550R

Camden CM-AF550R Double Gang Mushroom Push Button Red

Double gang mushroom button for TCP/IP access control at 30VDC

• Mushroom push button design with double gang form factor for tactile actuation
• TCP/IP networked communication compatible with HID-based credential systems
• Red housing, 30VDC operation standard for professional access control installations

Camden · CM-PT250SS-12

Camden CM-PT250SS-12 Stainless Steel Endcaps 12"

12" stainless steel endcaps for Camden mounting frames, indoor/outdoor

• 304 stainless steel construction resists corrosion in wet or outdoor environments
• 12-inch length fits Camden mounting frame assemblies and compatible systems
• Suitable for both indoor and outdoor security and access control installations

Camden · CM-PT250SS-18

Camden CM-PT250SS-18 Stainless Steel Endcaps 18"

• 300-series stainless endcaps resist corrosion in salt-spray and high-humidity sites.
• 1/4" ID fits up to four 22 AWG or two 18 AWG conductors for standard strike circuits.
• 18" length suits frame-to-panel runs in 36"–48" rough openings without splicing.

Camden · CM-PT250SS-24

Camden CM-PT250SS-24 Stainless Steel Endcaps 24"

• 304-grade stainless endcaps resist corrosion in salt-air and high-humidity outdoor installs.
• 24" length spans standard door frames without splices, reducing signal-run failure points.
• 1/4" bore accepts 4x22 AWG or 2x18 AWG wire; terminates on-site with no special tools.

Camden · CM-PT250SS-36

Camden CM-PT250SS-36 Stainless Steel Endcaps 36 Inch

• 300-series stainless steel resists corrosion in high-humidity and coastal environments.
• 1/4" bore fits 4-conductor 22 AWG and 2-conductor 18 AWG access control cables cleanly.
• 36-inch length covers panel-to-door runs and extended raceway segments in one piece.

Camden · CM-PT375SS-12

Camden CM-PT375SS-12 Stainless Steel Endcaps 12 Inch

• 300-series stainless endcaps resist washdown, salt spray, and moisture-driven corrosion.
• 3/8" ID tube routes up to 16×22 AWG or 8×18 AWG conductors in a single pass.
• 12-inch length fits standard commercial door frames without on-site trimming.

Camden · CM-PT375SS-24

Camden CM-PT375SS-24 Stainless Steel Endcaps 24"

• Stainless steel housing resists corrosion in salt-air and wet environments for 10+ years.
• Carries 16× 22 AWG or 8× 18 AWG conductors through a 3/8" ID protective sleeve.
• 24" length bridges standard 18–30" door-to-frame spans; 36" variant available for wider gaps.

Camden · CM-PT375SS-36

Camden CM-PT375SS-36 Stainless Steel Endcaps 36 Inch

• 304 stainless steel resists corrosion in salt-air, high-humidity, and exterior sites.
• 36-inch length spans full door frames, minimizing mid-run splices and failure points.
• 3/8-inch ID supports 16-conductor 22 AWG or 8-conductor 18 AWG power transfer wire.

Camden · CM-RFK354

Camden CM-RFK354 Exit Buttons

TCP/IP networked exit button with HID credential support for access control

• Network-based REX signaling integrates directly with TCP/IP access control panels
• HID credential compatibility ties into existing cardholder databases and systems
• Centralized monitoring with audit trail logging for remote exit request verification

Camden · CM-RFK454

Camden CM-RFK454 Exit Buttons

• TCP/IP connectivity integrates directly into existing IP network infrastructure without dedicated controller wiring.
• HID credential support ensures compatibility with established card and badge reader ecosystems.
• Kinetic battery-less push plates eliminate battery maintenance across wall and column mount deployments.

Camden · CM-RFK464

Camden CM-RFK464 Exit Buttons

• TCP/IP communication integrates directly into IP-native access control networks.
• HID credential support simplifies deployment in mixed-vendor reader environments.
• Kinetic, battery-less switch operation eliminates wiring to a power source at the door.

Camden · CM-RFL354-A

Camden CM-RFL354-A Exit Button Credential Reader

HID credential exit button with TCP/IP networking and 30VDC power

• HID-compatible credential reading integrates with existing badge systems
• TCP/IP communication connects directly to networked access control platforms
• 30VDC operation requires dedicated power provisioning at exit point

Camden · CM-RFL452-SA

Camden CM-RFL452-SA Exit Buttons

• Operates at 30VDC, aligning with standard access control power infrastructure.
• Wall or recessed mount options support flexible door-side deployment in any installation.
• Includes CM-TX-9 wall switch transmitter for wireless door control system integration.

Camden · CM-RFL454-LPA

Camden CM-RFL454-LPA Exit Buttons

TCP/IP exit button with HID credential reader for networked access control

• IP-addressable device integrates directly into networked security systems
• Supports HID iCLASS and proximity credentials on 30VDC power supply
• Request-to-exit button functionality for facility entry and exit points

Camden · CM-RFL454-SA

Camden CM-RFL454-SA Exit Buttons

• Operates at 30VDC for direct compatibility with commercial strikes and mag-lock supplies.
• Wall or recessed mount options simplify retrofit and new-construction door deployments.
• Includes CM-TX-9 wall switch transmitter, enabling wireless door control integration.

Camden · CM-RFL464-LPA

Camden CM-RFL464-LPA Exit Buttons

Hardwired exit button with integrated HID reader and TCP/IP networking

• Reads HID cards and badges directly at exit point without separate reader
• TCP/IP network communication for real-time status in access control systems
• 30VDC operation compatible with standard door strikes and locking hardware

Camden · CM-RFL46CB4-LPA

Camden CM-RFL46CB4-LPA Exit Buttons

• HID credential support simplifies drop-in integration with existing multi-reader deployments.
• TCP/IP communication enables centralized monitoring and remote configuration over the network.
• 30VDC operation and wall/recessed mount options streamline installation into standard AC infrastructure.

Camden · CM-RQE70A

Camden CM-RQE70A PIR Request to Exit Detector

• UL 294 and ULC-S319 Class I listed, satisfying AHJ code-compliance audit requirements.
• Dual Form C relay contacts connect directly to EM locks and strikes—no intermediate relay needed.
• Four field-customizable modes tune detection range via on-board buttons without system downtime.

Camden · CM-RQE70ABK

Camden CM-RQE70ABK PIR Request to Exit Detector

• PIR relay output triggers on physical motion, closing the card-in/PIR-out egress gap.
• 30VDC operation integrates directly with standard access control power supplies.
• Hardwired relay output eliminates wireless dependencies in RF-congested environments.