Wireless Access Points

Selecting a sort option will reload the product list.

Showing Results for Wireless Access Points

Wireless Access Points

Enterprise wireless access points for surveillance backhaul, on-site connectivity, and IoT device networks. Wi-Fi 6/6E models with high client density, seamless roaming, and centralized management.

Plan Your Deployment

  • Plan AP placement for coverage density and channel reuse
  • Evaluate Wi-Fi 6E (6 GHz) for dedicated surveillance backhaul
  • Confirm PoE class and mounting hardware for ceiling or outdoor install
  • Select controller-based or cloud-managed architecture
Plan Wireless Network PoE Budget Calculator

Wireless Access Points — Engineering-Grade Network Infrastructure for Commercial Deployments

This category covers 55 working models of wireless access points sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.

What to Look For

Port count and PoE budget come first. An 8-camera install needs at least 9 ports (cameras + uplink), with PoE budget covering the sum of per-camera PoE class. Account for uplink speed: 1 Gbps uplinks bottleneck under heavy video load on switches with 8+ high-resolution cameras. SFP+ or 10 Gbps uplinks remove that bottleneck on growing sites.

Managed versus unmanaged switches affect troubleshooting and VLAN segmentation. Managed switches (HPE Aruba, Cisco, Netgear ProSAFE M-series) support VLANs, link-aggregation, port mirroring, and SNMP monitoring — essential for any deployment over 16 cameras or with mixed traffic. Unmanaged switches work for small isolated camera networks but limit growth and troubleshooting visibility.

Layer 3 capability (routing, VLAN inter-VLAN routing) becomes important when surveillance, access control, and corporate traffic share the same physical network. Surveillance VLAN isolation is now standard practice — segregate camera traffic from corporate Wi-Fi and guest networks to prevent broadcast storms and lateral attack paths. Confirm the switch supports the VLAN count and ACL complexity you need.

Outdoor/industrial deployments need ruggedized switches. ComNet, Antaira, and Moxa make hardened switches rated for -40°C to +75°C, vibration, and waterproof housings. DIN-rail mounting fits standard outdoor enclosures. Standard data-closet switches in outdoor enclosures fail within 1-2 years from condensation and temperature swings; spec the right environment rating up front.

Key Specs in This Category

SpecAvailable Options
IP RatingIPX6, IP54, IP55
ConnectivityWiFi, WiFi + Wired, Wired
PowerPoE+, PoE, PoE++, AC/DC, Battery
TypeAccess Point, Accessory, Mount, Transceiver, Wireless Bridge, Cover

Related Categories

Or browse all Infrastructure.

Top Brands in This Category

Frequently Asked Questions

What's the difference between managed and unmanaged PoE switches?

Unmanaged switches power-on and forward traffic without configuration — simplest deployment but no VLAN, no monitoring, no troubleshooting visibility. Managed switches add VLANs, link-aggregation, port mirroring, SNMP, and remote-management interfaces. For deployments above 16 cameras or those sharing infrastructure with other systems, managed is the right choice; the per-port cost is modest and the operational benefit is large.

How much PoE budget should I size for?

Sum the PoE-class budget of all PoE-powered devices, then add 20-30% headroom for growth. Eight 802.3at cameras at 30W max each is 240W minimum — but a 130W-budget 8-port PoE+ switch can't deliver that. Confirm both per-port budget and total PoE budget; many entry-level switches advertise PoE+ ports but cap aggregate budget at half the per-port maximum.

Do I need 10 Gbps uplinks?

For installations under 32 cameras with mid-resolution streams, 1 Gbps uplinks suffice. Above that, or when you need fast investigative playback for many simultaneous reviewers, 10 Gbps (SFP+) uplinks remove the choke point. NVRs writing to NAS over the network also benefit. SFP+ has become reasonably affordable on managed switches; opt for it on new installs over 16 cameras.

Can I run VoIP and video on the same switch?

Yes — modern managed switches use VLAN segregation to keep VoIP, video, and data traffic separated even on shared physical ports. Use QoS (Quality of Service) to prioritize VoIP for low latency and assign video its own queue. Avoid mixing untagged traffic types on a single switch port without VLAN configuration; broadcast storms and bandwidth competition cause both voice and video quality issues.

What's the right uplink between buildings on a campus?

Single-mode fiber for runs over 100 m, multi-mode for shorter runs (typically up to 550 m on OM3, 300 m on OM4 at 10 Gbps). Bidirectional SFPs (single fiber instead of pair) save fiber count when the run is already deployed. Avoid copper between buildings — ground-potential differences during lightning strikes destroy switch SFP modules even when surge-protected.

Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.

!