Ubiquiti · LAP-GPS-US

Ubiquiti LAP-GPS-US Outdoor Wireless Access Point with GPS

Outdoor AP with integrated GPS for synchronized multi-site mesh networks

• Integrated GPS enables precise frame timing sync across multi-site mesh cells, reducing interference.
• 16 dBi antenna gain and AirMax ac protocol support reliable long-range P2P and P2MP bridge links.
• Single-cable 48V passive PoE at 7W simplifies remote endpoint installation with no added power runs.

Ubiquiti · UDB-IOT-US

Ubiquiti UDB-IOT-US Wireless Bridge

WiFi 5 wireless bridge for last-mile IoT and remote infrastructure

• 866.7 Mbps WiFi 5 at 5 GHz handles NVR backhaul and IoT data without bottleneck.
• Single gigabit RJ45 connects directly to switches, NVRs, or IoT gateways—no adapters.
• NDAA-compliant, wall-mount housing deploys on 100–240V AC at just 25W draw.

Comnet · NWK1IC

Comnet Hardened Point-to-Point Wireless Ethernet Kit Contains Client and Remote Units and - NWK1IC

Comnet · NW2

Comnet Industrially Hardened Point-to-Multipoint Wireless Ethernet Link includes Power - NW2

Comnet · NW1

Comnet NW1 Wireless Ethernet Bridge

802.11a/n wireless bridge for 500m point-to-point Ethernet links

• 95 Mbps throughput handles concurrent 1080p camera streams with headroom to spare.
• 500m point-to-point range eliminates repeaters across most campus or perimeter links.
• SNMP 2c, Telnet, and Syslog support enable remote monitoring without field visits.

Comnet · NW9

Comnet NW9 NetWave Wireless Ethernet Managed Switch

Managed wireless switch with 500m range and 35W PoE for industrial sites

• Gigabit wireless link reaches 500m, eliminating fiber runs at perimeter sites.
• 35W PoE+ budget powers cameras, intercoms, or APs directly from the unit.
• DIN rail and pole mount options with lifetime warranty suit permanent outdoor installs.

Comnet · NWADA1

ComNet NWADA1 11-Port Gigabit Unmanaged DIN Rail Switch

11-port Gigabit switch on DIN rail—plug-and-play, no config

• All 11 ports run at 1 Gbps, supporting simultaneous HD camera and access control traffic.
• Integrated 35mm DIN rail mount installs directly in cabinets—no brackets or extra hardware.
• Unmanaged plug-and-play design eliminates config time; backed by a lifetime warranty.

Comnet · NWAVBSA1

ComNet NWAVBSA1 11-Port Gigabit Industrial Switch

11-port gigabit switch for industrial field networks, unmanaged plug-and-play

• All 11 ports run at 1 Gbps, eliminating bottlenecks across simultaneous device connections.
• Unmanaged plug-and-play operation requires zero configuration, reducing deployment time in the field.
• DIN rail and pole/rack mount options with included hardware support flexible enclosure installs.

Comnet · NWBKT

Comnet NWBKT 11-Port Gigabit Unmanaged DIN Rail Switch

11-port gigabit unmanaged switch for DIN rail security deployments

• All 11 ports run at 1 Gbps full line-rate, eliminating bottlenecks in multi-camera deployments.
• Unmanaged plug-and-play operation requires zero configuration, reducing installation time on every job.
• Standard 35mm DIN rail mount fits directly into control panels and wall-mount cabinets, backed by a lifetime warranty.

Comnet · NWK1

ComNet NWK1 NetWave Wireless Ethernet Bridge

802.11a/n wireless bridge, 500m range, pole-mountable for remote sites

• 95 MBps throughput on 5 GHz 802.11a/n sustains multi-camera video over 500 m links.
• 30 W PoE+ budget powers remote cameras or APs directly, eliminating endpoint power runs.
• Point-to-point and multipoint modes with pole/wall mount suit campus and perimeter installs.

Comnet · NWK9

Comnet NWK9 NetWave 11-Port Managed Wireless Ethernet Switch

11-port managed switch with 500m wireless for industrial sites

• 11 gigabit ports with 35W PoE+ budget powers cameras and access control devices.
• 500m wireless range reduces cabling needs across campuses and remote industrial sites.
• DIN rail mount and industrial temp rating simplify deployment in harsh field enclosures.

Comnet · NWKBB100

ComNet NWKBB100 11-Port Gigabit Unmanaged DIN Rail Switch

11-port Gigabit DIN rail switch, plug-and-play unmanaged

• 11 Gigabit ports deliver full line-rate switching for cameras, NVRs, and access control.
• DIN rail mount fits standard 35mm rails for fast cabinet or wall-box installation.
• Unmanaged plug-and-play operation eliminates configuration overhead in fixed topologies.

Comnet · NWKBB200

Comnet NWKBB200 11-Port Gigabit Unmanaged Switch

11-port Gigabit unmanaged switch with DIN rail mount for plug-and-play security networks

• 11 Gigabit ports handle simultaneous IP video, access control, and sensor traffic.
• Unmanaged architecture means zero configuration—power on and connect immediately.
• DIN rail mount fits directly into control cabinets and electrical enclosures.

Comnet · NWKSP3

ComNet NWKSP3 11-Port Gigabit PoE Injector

11-port Gigabit PoE injector, unmanaged, DIN rail mount

• 11 Gigabit ports deliver PoE+ (802.3at) power to cameras, APs, and readers.
• Unmanaged plug-and-play design eliminates configuration overhead at commissioning.
• DIN rail mount with NEMA 4X/IP65 rating suits cabinet and industrial installs.

Comnet · NWKSP4

ComNet NWKSP4 11-Port Gigabit PoE Injector

11-port Gigabit PoE injector, DIN rail mount, unmanaged operation

• All 11 ports deliver PoE+ (802.3at) and Gigabit throughput for high-bandwidth cameras.
• Unmanaged plug-and-play operation eliminates configuration overhead during deployment.
• DIN rail mount fits standard 35mm rails in telecom cabinets with lifetime warranty coverage.

Comnet · NWPM1248GE

Comnet NWPM1248GE 11-Port PoE Injector

11-port unmanaged PoE injector with 328-foot range for distributed power

• 11 Gigabit ports deliver full-speed PoE+ (802.3at) to remote devices up to 328 ft away.
• DIN rail mount fits 35mm rails in cabinets, junction boxes, and outdoor enclosures.
• Industrial temperature rating and lifetime warranty support harsh, non-climate-controlled sites.

Comnet · NWPM2448GE

ComNet NWPM2448GE 11-Port PoE Injector

11-port Gigabit PoE injector for industrial surveillance and access control

• 11 Gigabit ports deliver PoE+ (802.3at) power and data from a single DIN rail unit.
• Industrial storage rating (-40°C to +80°C) ensures reliable operation in harsh enclosures.
• Unmanaged plug-and-play design eliminates firmware and VLAN configuration at commissioning.

Comnet · NWPM24PPI

Comnet NWPM24PPI 11-Port Unmanaged PoE Injector

11-port Gigabit PoE injector, DIN rail mount, zero configuration

• All 11 ports run at 1 Gbps, supporting real-time video streams without bottlenecks.
• DIN rail mount fits standard control cabinets and field enclosures for clean installs.
• Unmanaged plug-and-play design eliminates configuration time across all 11 PoE ports.

Comnet · NWPM4848GE

ComNet NWPM4848GE PoE Injector — 11-Port Gigabit DIN Rail

11-port Gigabit PoE injector with 328ft range, DIN rail mount

• Powers 11 PoE+ (802.3at) endpoints simultaneously, cutting per-drop cabling costs.
• Gigabit throughput at up to 328 ft supports high-bandwidth cameras without repeaters.
• DIN rail mount and industrial temp range suit control cabinets and harsh environments.

Comnet · NWK1-P5T

Comnet POINT-TO-POINT WIRELESS SWITCH - NWK1-P5T

Comnet · NWK9IC

Comnet Ultra-High Throughput Impact-Resistant Hardened Wireless Ethernet Kit 500Mbps - NWK9IC

Ubiquiti · AF-11

Ubiquiti AF-11 airFiber Wireless Bridge

Point-to-point wireless bridge, 1.3+ Gbps throughput, passive PoE

• Delivers 1375.8 Mbps peak throughput on a 56 MHz channel for dense backhaul links.
• Passive PoE (50V DC, 36W) powers the remote unit over a single Ethernet run—no AC required.
• 128-bit AES encryption and 11 selectable channel widths adapt to any spectrum environment.

Ubiquiti · AF-11-DUP-H

Ubiquiti AF-11-DUP-H airFiber Wireless Bridge

High-band duplexer for AF-11 MIMO wireless bridges at 11.44–11.7 GHz

• Enables 4x4 MIMO on AF-11 links at 11.44–11.7 GHz without additional frequency licensing.
• NDAA-compliant design meets U.S. government and defense procurement requirements.
• Powers via 60W PoE, simplifying installation in point-to-point backhaul deployments.

Ubiquiti · AF-11-DUP-L

Ubiquiti AF-11-DUP-L airFiber Wireless Bridge

Low-band duplexer for AF-11 MIMO activation in licensed microwave links

• Activates full MIMO on AF-11 links across 10.7–10.955 GHz and 11.2–11.445 GHz bands.
• Paired deployment doubles link throughput with no power supply or field tuning required.
• NDAA-compliant passive RF component suits government and carrier sourcing mandates.

Ubiquiti · AF-24HD-US

Ubiquiti AF-24HD-US airFiber Wireless Bridge

2 Gbps point-to-point wireless bridge for long-distance backbone links

• Delivers 2 Gbps full-duplex throughput for uninterrupted backbone and video traffic.
• 24 GHz directional link spans 20+ km, eliminating fiber trenching on long runs.
• PoE-powered at 60 W; plan for tower mounting—unit weighs 55 lbs with wind-load requirements.

Ubiquiti · AF-5(US)

Ubiquiti AF-5(US) Point-to-Point Wireless Bridge

1.2+ Gbps point-to-point wireless bridge for campus backhaul and remote sites

• Delivers 1.2+ Gbps dedicated throughput with no shared-spectrum contention overhead.
• Survives -40 to 55°C and 125 mph wind loads for reliable outdoor backhaul deployment.
• 128-bit AES encryption and FCC/CE/IC certifications meet enterprise compliance requirements.

Ubiquiti · AF-5G23-S45-US

Ubiquiti AF-5G23-S45-US airFiber Wireless Bridge

Licensed 5 GHz directional antenna for point-to-point wireless bridges

• 23 dBi gain extends fade margin on P2P links beyond 5 km without amplifiers.
• Licensed 5 GHz operation eliminates interference from unlicensed Wi-Fi devices.
• Slant 45° dual-polarization design supports 2x2 MIMO for added link resilience.

Ubiquiti · AF-5G30-S45-US

Ubiquiti AF-5G30-S45-US airFiber Wireless Bridge

5 GHz directional antenna for point-to-point airFiber wireless bridges

• 30 dBi gain delivers high receive sensitivity for links exceeding 10 km.
• Slant 45° polarization aligns natively with airFiber radios, cutting install time.
• 5 GHz operation spans licensed and unlicensed bands for regional regulatory flexibility.

Ubiquiti · AF-5G34-S45

Ubiquiti AF-5G34-S45 airFiber Wireless Bridge

5 GHz dish bridge for point-to-point links up to 5+ kilometers

• 34 dBi dish antenna delivers reliable point-to-point links at 5+ km range.
• Operates in licensed and unlicensed 5 GHz bands for flexible spectrum planning.
• Layer 2 transparent bridging requires no IP assignment, simplifying integration.

Ubiquiti · AF-5U

Ubiquiti AF-5U airFiber Wireless Bridge

1.2+ Gbps point-to-point wireless bridge for long-distance site links

• Delivers 1.2+ Gbps sustained throughput with sub-millisecond latency over 5 GHz.
• Withstands winds up to 200 km/hr and operates from -40 to 55°C for harsh outdoor sites.
• 128-bit AES encryption and GPS sync support secure, interference-managed point-to-point links.

Ubiquiti · AF-5XHD-US

Ubiquiti AF-5XHD-US 5 GHz Point-to-Point Wireless Bridge

Licensed 5 GHz point-to-point bridge with passive PoE for remote sites

• IP67-rated radome housing withstands -40 to 55 °C for harsh outdoor deployments.
• AES-256 encryption secures backhaul links across selectable 10–100 MHz channels.
• Passive PoE (18–54 VDC) eliminates separate power runs at remote or hard-to-reach sites.

Ubiquiti · AF-MPX4-US

Ubiquiti AF-MPX4-US airFiber Wireless Bridge

Point-to-point wireless bridge for campus and remote site connectivity

• 4x4 MIMO architecture delivers multi-gigabit backhaul across campus and remote links.
• Dual licensed/unlicensed spectrum operation adapts to regional RF regulations and interference.
• At 2.3 lb and 14.7×9.2×3.7 in, mounts on existing poles or towers with no reinforcement.

Ubiquiti · AF-MPX8-US

Ubiquiti AF-MPX8-US Licensed Wireless Bridge

Licensed point-to-point wireless bridge for interference-free backhaul

• Transparent Layer 2 bridging lets paired units appear as a cable—no IP config needed.
• Licensed spectrum operation reduces interference and link fluctuation on critical backhaul.
• PoE 802.3af-powered at 4.6 lb enables clean rooftop or tower installs without local AC.

Ubiquiti · AF11-COMPLETE-HB

Ubiquiti AF11-COMPLETE-HB airfiber 11, with antenna

Licensed 10 GHz wireless bridge for point-to-point and multipoint backhaul

• Licensed 10.15–10.25 GHz band eliminates ISM interference for mission-critical links.
• Integrated antenna and duplexer ship pre-aligned, reducing installation labor and RF loss.
• Supports point-to-point and point-to-multipoint modes for flexible backhaul deployments.

Ubiquiti · AF11-COMPLETE-LB

Ubiquiti AF11-COMPLETE-LB airfiber 11, with antenna,

11 GHz point-to-point wireless bridge with integrated antenna, ready to deploy

• Unlicensed 11 GHz band eliminates FCC filing delays for faster backhaul deployment.
• Full-duplex adaptive modulation (QPSK to 256-QAM) maintains link quality through rain fade.
• Factory-integrated antenna removes feedline runs and RF sourcing, reducing install labor.

Ubiquiti · AF60-LR

Ubiquiti AF60-LR 60 GHz Point-to-Point Wireless Bridge

60 GHz wireless bridge with 1.9 Gbps over 12+ km without fiber

• Delivers 1.9 Gbps true-duplex throughput over 12+ km with a 38 dBi dish antenna.
• Rated for -40 to 60°C operation and 200 km/h wind loads on galvanized steel mount.
• NDAA-compliant with FCC/IC/CE certs; managed via UISP with GPS alignment feedback.