Kantech · KT-1DE2-WTC

Kantech 1 Door ProWire Standard Enclosure Pre-Wired

Single-door access control enclosure, pre-wired and wall-mounted

• 1-door pre-wired enclosure for single-opening sites
• 24VDC unified power for KT-1-PCB controller hardware
• Wall-mount cabinet with factory-installed harness

Kantech · KT-BATT-1212

Kantech 12V 12Ah Rechargeable Battery

12V 12Ah rechargeable battery for Kantech access control backup power

• 12V 12Ah sealed lead-acid backup battery (144 Wh)
• Sustains access panels during multi-hour utility outages
• Standard form factor for Kantech control hardware

Kantech · KT-16DNE6-WPA

Kantech 16 Door ProWire Network Enclosure KT-16DNE6-WPA

16-door network enclosure, pre-wired and ready to deploy

• 16-door pre-wired ProWire network access enclosure
• 24VDC controller backbone for multi-door buildings
• PoE 802.3af + PANDUIT-compatible cable management

Kantech · KT-16DNE6-WTA

Kantech 16 Door ProWire Network Enclosure Pre-Wired

16-door ProWire network enclosure, factory pre-wired and tested

• 16-door pre-wired access control enclosure
• Factory-wired for fast multi-door deployment
• 24VDC controller + 0-50C operating range

Kantech · KT-16DE6-WPA

Kantech 16 Door ProWire STANDARD Enclosure

16-door access control enclosure, pre-wired and factory-assembled

• 16-door capacity in single wall-mount enclosure consolidates control
• Factory pre-wired harness cuts internal cabinet wiring labor
• 24VDC unified power architecture for KT-1-PCB/2/4 controllers

Kantech · KT-16DE6-WTA

Kantech 16 Door ProWire Standard Enclosure Pre-Wired

16-door access control enclosure, factory pre-wired and ready to install

• 16-door pre-wired enclosure ships ready for field installation
• Unified 24VDC power supply feeds all internal controllers
• 23 lb wall-mount unit reduces multi-cabinet sprawl

Kantech · KT-2DNE2-WTB

Kantech 2 Door ProWire Network Enclosure Pre-Wired

Pre-wired 2-door access controller for ProWire network installations

• 2-door pre-wired enclosure ready for field network drop
• 24VDC unified power feeds controllers and lock hardware
• Pre-tested harness cuts commissioning time on small sites

Kantech · KT-2DE2-WTB

Kantech 2 Door ProWire Standard Enclosure Pre-Wired

Factory pre-wired 2-door access control enclosure, ready to deploy

• 2-door pre-wired ProWire enclosure cuts install labor
• PoE+ 802.3at support for higher-power downstream devices
• Factory-tested harness prevents commissioning errors

Kantech · KT-4DNE2-WTA

Kantech 4 Door ProWire Network Enclosure Pre-Wired

4-door network enclosure, pre-wired and factory-tested for fast deployment

• 4-door pre-wired network enclosure with factory harness
• 24VDC unified power for KT-1-PCB and KT-4 controllers
• Eliminates internal point-to-point wiring during install

Kantech · KT-4DE2-WTA

Kantech 4-Door ProWire Standard Enclosure Pre-Wired

4-door access control enclosure, factory pre-wired and ready to install

• 4-door pre-wired enclosure with factory-installed harness
• 24VDC unified power supply for KT-1-PCB and KT-4 boards
• Eliminates field wiring of internal cabinet connections

Kantech · HID-C5106-NC

Kantech 5106RGGMNM SEOS/Proximity Card Reader

Dual-mode SEOS/proximity reader for mixed credential environments

• SEOS + proximity dual-mode credential reader
• No chip processing — credential data passes through
• Single reader footprint for both card formats

Kantech · 5395-104-03

Kantech 5395-104-03 HID Reader Cover Black

Weatherproof protective cover for HID-TL5395BL readers in harsh environments

• Replacement reader cover for HID-TL5395 ThinLine II
• Weatherproof housing for outdoor reader exposure
• Direct bezel fit — no field modification needed

Kantech · KT-8DNE4-WTA

Kantech 8 Door ProWire Network Enclosure Pre-Wired

Factory pre-wired 8-door enclosure with network management

• 8-door ProWire enclosure pre-wired for KT-1-PCB/2/4
• 24VDC unified power eliminates per-door PSU runs
• Operating range 32-122F covers indoor IT closets

Kantech · KT-8DE4-WPA

Kantech 8 Door ProWire Standard Enclosure

8-door ProWire Standard controller, pre-wired and factory-tested

• Accepts 120/208/230VAC input for international deployments
• Factory pre-wired harness saves 4-6 hours per install
• 8-door capacity scales mid-size commercial buildings

Kantech · KT-8DE4-WTA

Kantech 8 Door ProWire STANDARD Enclosure Pre-Wired

Factory pre-wired 8-door enclosure, ready to deploy out of box

• 8-door pre-wired enclosure with factory-tested harness
• 24VDC unified power architecture supports KT-4 controllers
• Operating range 0-50C suits typical IT-closet conditions

Kantech · ASC-121T

Kantech ASC-121T Indala Clamshell Proximity Card

26-bit Wiegand clamshell card for Kantech & Indala readers

• Indala 26-bit Wiegand clamshell proximity card
• Rigid plastic construction for high-touch handling
• Compatible with any 26-bit Indala Wiegand reader

Kantech · ASC-121TK

Kantech ASC-121TK Indala Clamshell Proximity Card

Indala clamshell proximity card, 26-bit Wiegand for access control

• Indala 26-bit Wiegand clamshell proximity card
• Durable hinged plastic resists daily handling wear
• Compatible with ASC readers and third-party Indala

Kantech · ASK-116T

Kantech ASK-116T Indala Keytag 26-Bit Wiegand

Passive 26-bit Wiegand keytag for standard access control systems

• Indala 26-bit Wiegand keytag for ASK Series readers
• Passive RFID — no batteries or charging required
• Pocket-sized for daily key ring carry

Kantech · ASK116TK

Kantech ASK116TK Indala Keytag 26-bit Wiegand

26-bit Wiegand keytag on Indala frequency for Kantech systems

• Indala 26-bit Wiegand keytag for legacy access deployments
• Compact keytag form factor for parking-gate and vehicle access
• Direct integration with most Wiegand-compatible readers

Kantech · BC-301

Kantech BC-301 Bar Code Reader

1D/2D bar code reader for indoor/outdoor access control

• Bar code reader for 1D and 2D credential formats
• Outdoor-rated construction for loading docks and gates
• Direct integration with Kantech access control panels

Kantech · CBLK-4401VK

Kantech CBLK-4401VK RS-232 Cable and EPROM Kit

RS-232 cable and EPROM kit for Kantech PC-4401 commissioning

• RS-232 cable + EPROM firmware provisioning kit
• 1.8 m (6 ft) cable for PC-4401 module programming
• Compatible with Kantech PC-4401 DSC module

Kantech · CBLK-IT100

Kantech CBLK-IT100 RS-232 Cable Kit

RS-232 cable kit for DSC IT100 to Kantech access control integration

• RS-232 cable kit with 10-foot length for flexible routing
• Compatible with Kantech KT-400 and EntraPass platforms
• Bridges DSC IT100 panel to Kantech access control

Kantech · CBLK-ITV2

Kantech CBLK-ITV2 RS-232 to RS-422 Cable Kit

RS-232 to RS-422 converter cable for Kantech/DSC NEO panels

• RS-232 to RS-422 cable kit with integrated converter
• 6-foot cable for flexible Kantech panel routing
• Requires TL280 module firmware v4.10.4.29 or higher

Kantech · DK-1

Kantech DK-1 Door Hardware Kit

Complete door access kit with PoE++ reader and magnetic contact

• Door hardware kit with T.REX-LT request-to-exit reader
• GRI steel door recessed magnetic contact for state sense
• PoE++ 802.3bt Class 3 power for modern IP infrastructure

Kantech · DS-4114-05

Kantech DS-4114-05 Electric Door Strike 12VAC/DC

Fail-locked electric strike, 12VAC/DC dual voltage for access control

• Electric door strike, 12V AC/DC for low-voltage door installs
• Code-compliant for typical commercial entry doors
• Direct integration with most access control platforms

Kantech · DS-4114-08

Kantech DS-4114-08 Electric Door Strike

24VAC/DC electromagnetic strike with fail-locked security during power loss

• Fail-locked electric strike — secure during power loss
• 24VAC/DC dual supply for legacy and modern panels
• Reduces dependency on backup power for door security

Kantech · MT-2KDYE

Kantech Dual Technology ioSmart 13.56 MHz Card

Dual-tech 13.56 MHz card with dye-sub photo ID for Kantech systems

• Dual-tech smart card: DESFire, MIFARE, HID, 125kHz prox
• 13.56 MHz ISO 14443 Type A/B compliance
• AES-128 encryption for advanced credential security

Kantech · EK-1M-MTM

Kantech EK-1M-MTM Expansion Kit with Controller

Modular multi-door controller kit scales from 4 to 8+ doors without replacing hardware

• Expansion kit with KT-1 controller for added doors
• Multi-tech reader handles MIFARE, HID, NFC, 125kHz prox
• AES-128 encrypted RS-485 link to host system

Kantech · EK-1M-MTSG

Kantech EK-1M-MTSG Expansion Kit Controller

Modular expansion controller for multi-zone access across distributed facilities

• Modular expansion controller for scaling multi-zone sites
• Multi-tech smart card reader bundled with controller
• AES-128 encryption on RS-485 communication line

Kantech · EK-1M-RDR

Kantech EK-1M-RDR Expansion Kit with Controller

Proximity controller + reader kit for single-door access expansion

• Pre-matched KT-1 controller and ioProx reader bundled
• 12VDC 1-door expansion kit for adding doors to system
• Factory-assembled kit minimizes commissioning errors

Kantech · EK-1M-SCSG

Kantech EK-1M-SCSG Expansion Kit KT-1-M Controller

4-door expansion kit with KT-1M controller and I/O module

• KT-1-M master controller with KT-SG-SC expansion module
• Multi-tech reader: MIFARE, HID, NFC, 125kHz prox
• RS-485 + Wiegand integration with existing Kantech systems

Kantech · EK-400-MTM

Kantech EK-400-MTM Expansion Kit Controller

Scale KT-400 systems with modular expansion—add readers and doors without replacing core

• KT-400 expansion kit for multi-door access control
• Multi-tech reader: DESFire + MIFARE + HID + NFC + Prox
• RS-485 + AES-128 for enterprise-grade encryption

Kantech · EK-400-SCM

Kantech EK-400-SCM Expansion Kit Controller

4-door controller with multiplexing module for enterprise system expansion

• KT-400 expansion kit with KT-MUL-SC multiplexer
• 4-door controller + smart-card + proximity reader support
• Wiegand + TCP/IP + RS-485 + RS-232 + 12VDC

Kantech · EK-400-SCSG

Kantech EK-400-SCSG Expansion Kit with KT-400

KT-400 controller + expansion module for multi-door enterprise access control

Kantech · EK-403

Kantech EK-403 Expansion Kit with KT-400 Controller

KT-400 controller expansion kit for multi-door Kantech system growth

• KT-400 expansion kit with P325XSF expansion component
• Centralized controller + proximity reader bundle
• TCP/IP + RS-485 + RS-232 for distributed sites

Kantech · FA-44260

Kantech FA-44260 Cleaning Rollers 3-Pack

3-pack cleaning rollers for Kantech DTC proximity card readers

• 3-pack cleaning rollers for DTC4250e, DTC4000, DTC400e
• Removes dirt, dust, and magnetic residue from read heads
• Extends card reader lifespan and read reliability