Sub categories

Showing Results for Infrastructure

Compare

Out of stock
NETGEAR

SKU: RAX42-100NAS

NETGEAR RAX42-100NAS 5PT AX4200 WiFi 6 Router
- Five GbE ports support wired IP cameras, NAS, and APs at full 1 Gbps each.
- WiFi 6 OFDMA and MU-MIMO handle concurrent IoT, camera, and client traffic cleanly.
- Wall-mount form factor fits network closets and cabinet installs without rack space.
$294.86 $205.99 Save $88.87

Add to Cart
The item has been added
Free shipping over $499

$294.86 $205.99 Save $88.87

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: RAX43-100NAS

NETGEAR RAX43-100NAS AX4200 Wireless Router
- AX4200 dual-band WiFi delivers 4 Gbps aggregate throughput for cameras and clients.
- PoE++ (802.3bt) ports supply up to 90W per cable, eliminating separate power runs.
- Wall and ceiling mounting options suit parking structures, perimeters, and remote sites.
$387.92 $271.99 Save $115.93

Add to Cart
The item has been added
Free shipping over $499

$387.92 $271.99 Save $115.93

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBE370-100NAS

Netgear RBE370-100NAS ORBI3 DB WIFI7 Satellite
- WiFi 7 (802.11be) dual-band mesh extends coverage without Ethernet backhaul.
- Wall and ceiling mount options simplify placement in retrofit deployments.
- Antenna gain of 4.1–4.6 dBi supports stable multi-floor signal propagation.
$232.74 $162.99 Save $69.75

Add to Cart
The item has been added
Free shipping over $499

$232.74 $162.99 Save $69.75

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: RBE372-100NAS

Netgear RBE372-100NAS ORBI3 DB WIFI7 2PK
- WiFi 7 (802.11be) delivers 10G throughput for high-density, bandwidth-intensive deployments.
- Dual-band mesh pair with 4.1/4.6 dBi antennas improves wall and floor signal penetration.
- Wall/ceiling mountable plastic enclosures allow flexible placement with zero switch configuration.
$387.92 $271.99 Save $115.93

Add to Cart
The item has been added
Free shipping over $499

$387.92 $271.99 Save $115.93

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: RBE873-100NAS

NETGEAR RBE873-100NAS ORBI 870 WiFi 7 Mesh System
- 96-port switching fabric eliminates the need for a separate core switch in most mid-size deployments.
- 10G Ethernet backbone sustains multi-gigabit traffic when aggregating cameras, sensors, and APs.
- WiFi 7 tri-band mesh with PoE++ (802.3bt) supports wall/ceiling mounting at industrial temperatures.
$2,208.61 $1,406.99 Save $801.62

Add to Cart
The item has been added
Free shipping over $499

$2,208.61 $1,406.99 Save $801.62

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: RBE970-100NAS

Netgear RBE970-100NAS ORBI9 QB WIFI7 Satellite
- WiFi 7 (802.11be) backhaul delivers 10G-class throughput across multi-satellite deployments.
- PoE++ (802.3bt) powered — no auxiliary power drop needed, simplifying retrofit installations.
- Wall and ceiling mounting options with 4.1/4.6 dBi antennas suit open commercial floor plates.
$1,241.36 $865.99 Save $375.37

Add to Cart
The item has been added
Free shipping over $499

$1,241.36 $865.99 Save $375.37

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: RBE973S-100NAS

Netgear RBE973S-100NAS ORBI9 QB WIFI7 3P 1Y Armor
- WiFi 7 (802.11be) mesh delivers 10G backhaul, cutting latency on real-time apps.
- Wall and ceiling mounting options simplify deployment in warehouses and retail floors.
- Bundled ARMOR subscription adds threat protection across all connected devices for 1 year.
$3,103.43 $2,164.99 Save $938.44

Add to Cart
The item has been added
Free shipping over $499

$3,103.43 $2,164.99 Save $938.44

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: RBK752-100NAS

NETGEAR RBK752-100NAS ORBI Mesh WiFi System
- 96 Ethernet ports support dense IP camera and sensor deployments without wireless backhaul.
- Tri-band 802.11ax radio prevents throughput collapse in high-device-density facilities.
- Wall and ceiling mounting options suit both warehouse floor and overhead infrastructure runs.
$698.26 $488.99 Save $209.27

Add to Cart
The item has been added
Free shipping over $499

$698.26 $488.99 Save $209.27

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBK752P-100NAS

Netgear RBK752P-100NAS
- Mesh topology enables distributed coverage without wired runs between every node.
- Wired Ethernet backhaul supported where cabling exists to boost inter-node throughput.
- Auto-topology maintenance allows seamless device roaming across all deployed nodes.
$465.50 $327.99 Save $137.51

Add to Cart
The item has been added
Free shipping over $499

$465.50 $327.99 Save $137.51

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBK753P-100NAS

NETGEAR RBK753P-100NAS ORBI AX4200 WiFi System
- WiFi 6 (802.11ax) tri-band AX4200 supports dense device deployments with reduced interference.
- Multi-Gig Internet port prevents uplink bottlenecks on 2.5G or faster WAN connections.
- Real-time Internet port statistics display gives immediate visibility into bandwidth consumption.
$667.23 $466.99 Save $200.24

Add to Cart
The item has been added
Free shipping over $499

$667.23 $466.99 Save $200.24

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBK862SB-100NAS

NETGEAR RBK862SB-100NAS Orbi AX6000 2-Pack
- Wi-Fi 6 (802.11ax) dual-band mesh delivers 6 Gbps combined theoretical throughput.
- Wall and ceiling mounting options simplify deployment across multi-room and multi-floor layouts.
- Mobile app provisioning with DHCP and port-forwarding reduces on-site configuration time.
$1,241.36 $864.99 Save $376.37

Add to Cart
The item has been added
Free shipping over $499

$1,241.36 $864.99 Save $376.37

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBKE962-100NAS

NETGEAR RBKE962 Brings Unprecedented WIFI Speed - RBKE962-100NAS
- Wi-Fi 6 (802.11ax) with OFDMA supports simultaneous IP camera streams without bottleneck.
- Self-healing multi-node mesh eliminates single points of failure in wireless backhaul deployments.
- Dual wired/wireless backhaul lets integrators choose low-latency or cable-free satellite uplinks.
$1,706.88 $1,192.99 Save $513.89

Add to Cart
The item has been added
Free shipping over $499

$1,706.88 $1,192.99 Save $513.89

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBRE960-100NAS

Netgear RBRE960-100NAS Orbi AXE11000 Router
- WiFi 6E quad-band 802.11ax delivers 11 Gbps aggregate across four independent RF paths.
- Dedicated 6 GHz band offloads IP camera and NVR backhaul traffic, reducing stream latency.
- Integrated internet port statistics display enables on-device throughput monitoring at the node.
$931.02 $650.99 Save $280.03

Add to Cart
The item has been added
Free shipping over $499

$931.02 $650.99 Save $280.03

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RBSE960-100NAS

Netgear RBSE960-100NAS Orbi WIFI 6E Satellite
- WiFi 6E (802.11ax) with 6GHz band reduces congestion for low-latency backhaul deployments.
- Wall and ceiling mount options simplify installation in warehouses or light commercial spaces.
- Antenna gain of 4.1/4.6 dBi supports signal penetration through walls without added hardware.
$931.02 $647.99 Save $283.03

Add to Cart
The item has been added
Free shipping over $499

$931.02 $647.99 Save $283.03

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RNRP4430-100NAS

NETGEAR Readynas - 3100 Series 12 TB 4 X 3 TB - RNRP4430-100NAS
- 12TB across four 3TB bays fits 1U rack space for dense surveillance archive builds.
- RAID 6 tolerates dual simultaneous drive failure—safe for unattended security archives.
- NFS, SMB/CIFS, and iSCSI support integrates directly with NVRs and VMS platforms.
$8,750.00 $6,089.99 Save $2,660.01

Add to Cart
The item has been added
Free shipping over $499

$8,750.00 $6,089.99 Save $2,660.01

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RR2312H8-100NES

NETGEAR Readynas 1U 12-BAY High Density - RR2312H8-100NES
- 12-bay 1U rackmount design maximizes drive density in space-constrained server rooms.
- Native ONVIF support integrates directly with ONVIF-capable VMS platforms, no middleware needed.
- SMB/CIFS and NFS dual-protocol support ensures compatibility with Windows and Linux VMS environments.
$4,523.79 $3,174.99 Save $1,348.80

Add to Cart
The item has been added
Free shipping over $499

$4,523.79 $3,174.99 Save $1,348.80

Add to quote Compare

Infrastructure

Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.

Plan Your Deployment

Total PoE power budget and port density requirements
Switch throughput and uplink capacity planning
Redundancy and failover design considerations
Distance limitations and fiber conversion needs
Power conditioning and voltage compatibility

PoE Planning Guide Get Sizing Help

What to Look For When Buying

The six decisions that matter most before you spec.

PoE Power Budget Math

A 24-port PoE+ switch with 370W total budget can't actually run 24 outdoor cameras at peak 25W each. Simultaneous peak — not nameplate — is the limit. Always verify per-port PoE allocation and total budget against actual camera load. See PoE budget planning and why your PoE switch fails after 18 cameras.

328-Foot Ethernet Limit

Cat5e, Cat6, and Cat6A all top out at 100 meters (328ft) per TIA-568. Past that, you need a media converter to fiber, a PoE extender, or an intermediate switch. Common gotcha: in-wall patch + faceplate + drop + jumper all count against 328ft. Long runs to perimeter cameras frequently exceed the limit — plan for fiber or coax-PoE extension.

Managed vs Unmanaged Switches

Unmanaged switches work for small deployments but provide no VLAN segmentation, no QoS for video traffic, no monitoring, and no remote troubleshooting. Managed switches (Layer 2 or Layer 3) let you isolate cameras on a dedicated VLAN, prioritize video over office traffic, and diagnose link failures from a central SNMP platform. Spec managed for any deployment over 8 cameras.

UPS Sizing & Runtime

NVR + switches + cameras + access control have very different power profiles than office gear. Size UPS for actual wattage of all connected loads + 20% headroom, and calculate runtime with battery-life curves (runtime is non-linear — doubling load often cuts runtime 60%+). Surveillance UPS should provide 15-30 min to accommodate generator transfer or graceful shutdown.

Copper vs Fiber Uplinks

In-rack uplinks on 10G copper (Cat6A) work fine for short runs. Between-building and multi-floor uplinks should be fiber — single-mode for >300m, multimode for under. Fiber is also electrically isolated, which matters in lightning-prone environments. Axis, Hanwha, and Ubiquiti switches include SFP/SFP+ uplinks across most models.

Cooling & Airflow in Racks

Surveillance gear runs 24/7 — a closed rack at 90°F interior temperature will fail drives and switches faster than spec. Specify perforated doors, rack-mount fans, and leave 1U of airflow gap above/below heat-generating equipment. NVRs with internal fans need front-to-back airflow; network switches vary by vendor. Check thermal spec before sealing a wall-mount enclosure.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

802.3af / at / bt PoE Standards

802.3af = 15.4W/port (entry cameras), 802.3at PoE+ = 25.5W/port (most outdoor cameras), 802.3bt PoE++ Type 3 = 60W, Type 4 = 90W (PTZ, heated, multi-sensor). Specify switch support for the highest standard your cameras need — future-proofing with PoE++ switches costs marginally more.

TIA-568 Cabling Standards

Cat5e rated to 1 Gbps at 100m. Cat6 rated to 10 Gbps at 55m, 1 Gbps at 100m. Cat6A rated to 10 Gbps at 100m with proper grounding. Use Cat6A for new surveillance cabling runs — marginal cost premium over Cat6, meaningful margin for long runs + high PoE.

SFP / SFP+ / QSFP+ Modules

Small Form-factor Pluggable optics for fiber uplinks. SFP = 1 Gbps, SFP+ = 10 Gbps, QSFP+ = 40 Gbps. Match module to switch vendor compatibility (some vendors lock to their own brand of optics). Multimode fiber with OM3/OM4 for ≤300m, single-mode for longer or future-proof runs.

VLAN Segmentation

Dedicated VLAN for surveillance isolates camera traffic from office network — improves security (camera-to-camera lateral movement blocked), performance (no contention with office traffic), and troubleshooting. Configure access-control and intercom VLANs separately. Managed switches required; unmanaged switches cannot segment.

Long-Reach PoE Extension

Ethernet-over-Coax (EoC) extends Ethernet + PoE to 1,500+ feet over existing RG59 coax — ideal for analog-to-IP retrofits. Ethernet-over-UTP extenders push runs to 4,000ft over CAT cable. NVT Phybridge CHARIoT, Altronix eBridge, and Veracity Highwire are the common product families. Rate-limited to 100 Mbps typically.

UPS Topology: Line-Interactive vs Double-Conversion

Line-interactive UPS switch to battery on power failure — sufficient for office gear. Double-conversion (online) UPS convert AC→DC→AC continuously, providing perfectly conditioned power — required for sensitive SCADA/security gear in dirty-power environments. Specify double-conversion for NVRs at critical sites.

Typical Deployment Scenarios

8-Camera Single-Site Retrofit

Existing network + 8 outdoor IP cameras. Add a 16-port managed PoE+ switch (Ubiquiti UniFi, Axis T85) on a dedicated VLAN. 1U rack UPS for the NVR + switch. 120-160 watts total PoE budget comfortably runs 8 outdoor cameras with heater + IR.

48-Camera Campus Upgrade

Four buildings, 48 cameras total, existing fiber backbone. Per-building 24-port PoE++ switch with SFP+ fiber uplink to core. Dedicated surveillance VLAN, QoS for video traffic, SNMP monitoring. 2-post relay rack in each IDF closet with dedicated surveillance UPS.

Perimeter Fence Line (1,200ft)

6 bullet cameras + 2 PTZs along perimeter fence, main NVR in building. Fiber media converter + outdoor-rated fiber to a PoE++ switch in a weatherproof enclosure at the fence line. Alternative: NVT Phybridge CHARIoT over existing coax for retrofit applications.

Multi-Floor Office Tower

Stacked IDFs on every floor, cameras + access control + intercom on dedicated VLANs. Cisco Catalyst or Ubiquiti UniFi Pro managed switches per floor with 10G fiber uplink to building core. Per-IDF 3U UPS. Integration with VMS and access control head-end at main BDF.

Frequently Asked Questions

How do I calculate PoE budget for a camera deployment?

Sum the peak wattage of every camera (not nameplate — check spec sheet for "PoE class" or "max consumption"). Add 15-20% headroom for inrush during cold-start. The result is your required simultaneous-peak PoE budget. A 24-port PoE+ switch advertised at 370W can only run about 18 outdoor cameras with heaters + IR — see PoE budget planning.

What's the maximum Ethernet cable run for an IP camera?

100 meters (328 feet) per TIA-568 — total distance from switch port to camera port. That includes in-rack patch cords, in-wall cabling, faceplate jack, and camera jumper. For longer runs, use fiber with a media converter or a long-reach PoE extender. Going past 328ft on copper causes intermittent packet loss that looks like camera problems.

Do I need managed or unmanaged PoE switches?

For more than 8 cameras or any mixed-use network (cameras sharing infrastructure with office traffic), specify managed. VLAN segmentation isolates camera traffic for security and performance; QoS ensures video gets bandwidth priority; SNMP monitoring surfaces failures before users call. Unmanaged switches are acceptable only for small standalone deployments.

What UPS runtime should I plan for an NVR + switch?

15-30 minutes of runtime at actual load is typical — enough to ride through brief outages or allow graceful shutdown before battery exhaustion. For sites with generator transfer, 5-10 minutes is sufficient. Size UPS wattage for actual connected load + 20%, and use the vendor's runtime-at-load curve (runtime is non-linear). Double-conversion UPS for sensitive or dirty-power sites.

How far can I extend PoE past 328 feet?

Ethernet-over-Coax extenders (NVT Phybridge CHARIoT, Altronix eBridge) push Ethernet + PoE to 1,500+ feet over existing RG59/RG6 coax — ideal for analog-to-IP retrofits. UTP-based extenders reach 2,000-4,000 feet on Cat cable at reduced bandwidth (typically 100 Mbps). For new runs over 328ft, fiber + PoE switch at the camera end is usually cleaner architecture.

Should I put cameras on a separate VLAN?

Yes — always. A dedicated camera VLAN isolates camera traffic from office network for security (blocks camera-to-camera lateral movement if one is compromised), performance (cameras don't contend with office bandwidth), and troubleshooting (camera traffic is cleanly separated for packet capture). Requires managed switches; takes 10 minutes to configure on Ubiquiti UniFi, Cisco Catalyst, or any enterprise switch.

Sub categories

Showing Results for Infrastructure

Infrastructure

Plan Your Deployment

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading