Middle Atlantic RPAV3CTCAL Ratchet-Pro Floor Box Cover Kit

Overview

The RPAV3CTCAL is a Ratchet-Pro multiple service floor box cover kit from Middle Atlantic, configured as a 1DP 4COMM AL layout — one device plate position paired with four communications ports in an aluminum finish. It ships prewired with a 20A duplex receptacle, so the power side of the floor box is ready to terminate without sourcing a separate receptacle assembly. At 3.00 lbs, it's a lightweight cover plate kit rather than a full enclosure, built to close out a Ratchet-Pro floor box installation in a conference room, boardroom, training center, or any floor-mounted AV/power drop where a clean aluminum cover matters as much as the wiring underneath it. RPAV3CTCAL carries TAA certification, which matters if you're specifying for a government or federally-funded integration job where sourcing rules apply to every line item on the BOM.

Key Features

• Prewired 20A Duplex Receptacle: The power side arrives pre-terminated, cutting field wiring time on the electrical connection — a real factor when you're coordinating a floor box tie-in around a concrete pour or raised-floor schedule and don't want an electrician standing around waiting on a sub-assembly.
• 1DP 4COMM AL Configuration: One device plate opening plus four communications module positions gives you room to mix a power outlet with data, AV, or connectivity modules in a single floor box footprint — useful when a conference table needs both AC power and multiple signal drops (HDMI, USB-C, network) without daisy-chaining a second box.
• Aluminum Construction: Aluminum covers resist the dents and scuffs that rolling AV carts and chair casters put on floor-mounted hardware daily, holding up better over years of foot traffic than lighter-gauge stamped covers.
• Ratchet-Pro Compatible Design: Built to mate with Middle Atlantic's Ratchet-Pro floor box system, so it closes out the same box family used elsewhere in a facility's AV floor infrastructure rather than requiring a mismatched cover sourced separately.
• 3.00 lb Weight: Light enough that it doesn't add meaningful load to the floor box frame itself, and it keeps shipping costs down when you're ordering multiple units for a multi-room rollout.
• TAA Compliance: Confirmed TAA-compliant sourcing, which clears the documentation hurdle for government, education, or any procurement process that requires Trade Agreements Act attestation on the purchase order.
• 2-Year Warranty: A defined two-year manufacturer warranty term backs the unit, giving you a documented coverage window to point to if a component fails during normal commercial use.

Integration & Compatibility

RPAV3CTCAL is designed to integrate with Middle Atlantic's Ratchet-Pro floor box family, making it the cover kit to specify when you're closing out an existing Ratchet-Pro rough-in rather than starting a new box from scratch. The 4COMM openings accept standard communications modules, so you can configure the box for network jacks, AV connectors, or a mix, depending on what the room requires — pair it with the appropriate connectivity modules and any mounting solutions your table or credenza layout calls for. If you're planning a broader room build with in-wall or in-floor cables runs feeding a table box, it's worth reviewing a cable and connectivity planning guide before finalizing module selection, since the 4-port communications layout has a fixed capacity you'll want to fill correctly the first time. For rooms where the floor box feeds AV switching or signal extension gear, check compatibility against the rest of your AV over IP or extenders deployment before locking the module list, since floor box real estate is harder to expand after the concrete work is done.

Frequently Asked Questions

Q: Is the RPAV3CTCAL TAA compliant?

A: Yes. The RPAV3CTCAL carries TAA certification, supporting government and federally-funded procurement requirements.

Q: What's the warranty on the RPAV3CTCAL?

A: It carries a 2-year manufacturer warranty.

Q: What receptacle comes prewired on the RPAV3CTCAL?

A: It ships with a prewired 20A duplex receptacle already terminated on the power side.

Q: How many communications ports does the RPAV3CTCAL support?

A: The 1DP 4COMM AL configuration provides one device plate position and four communications module positions.

Q: What material and finish is the RPAV3CTCAL cover?

A: It's an aluminum cover kit.

Q: How much does the RPAV3CTCAL weigh?

A: 3.00 lbs.

Eden Phillips

The RPAV3CTCAL is one of those parts that looks simple on a line item and saves you an afternoon on-site. It's a Ratchet-Pro floor box cover in the 1DP 4COMM AL layout — one device plate spot and four comm ports — with a 20A duplex receptacle already prewired into the power side.

Technical Highlights:

• Prewired 20A Duplex: The receptacle termination is done before it hits the box, so your electrician isn't building that connection in the field — one less thing to get wrong during a floor pour tie-in.
• 1DP 4COMM AL Layout: Four communications positions alongside the device plate gives real flexibility for mixed power/data/AV drops in a single floor box, which is usually the constraint on conference table builds.
• 3.00 lb Aluminum Cover: Light enough to not stress the box frame, aluminum-tough enough to take rolling cart traffic over years of use in a boardroom or training room floor.

Deployment Considerations:

• Confirm your existing floor box is Ratchet-Pro compatible before ordering — this is a cover/kit for that specific box family, not a universal fit.
• The 4COMM openings are fixed at four positions, so plan your module count (network, AV, USB-C) before finalizing the order — there's no field expansion once it's installed.

Specify the RPAV3CTCAL when you're closing out a Ratchet-Pro floor box in a conference room or training space that needs one clean power drop plus room for four data/AV modules, and where TAA documentation is a procurement requirement.