Middle Atlantic RPAV3CTCAA Multi-Service Floor Box Cover Kit

The Middle Atlantic RPAV3CTCAA is a Ratchet-Pro multiple service floor box cover kit built for conference rooms, huddle spaces, and open-plan offices where power and AV connectivity need to surface at the floor without turning into a tripping hazard or a maintenance headache. It ships prewired with a 20A duplex receptacle and modular adapter openings, so the electrical side is done before it ever leaves the box. If you're speccing floor boxes for a boardroom table or a training room lectern feed, the RPAV3CTCAA is the cover plate and receptacle assembly that finishes that run.

Overview

This kit pairs an aluminum cover plate with Middle Atlantic's Ratchet-Pro mounting mechanism and a factory-prewired 20A duplex outlet. It's designed to close out a floor box installation with modular ports for data, AV, or additional power adapters, giving low-voltage and electrical trades a single cover assembly instead of separate plates for power and signal. At 3.00 lbs, it's substantial enough to sit flush and stay put under foot traffic without adding meaningful load to the floor box housing itself.

Key Features

• Aluminum cover construction: Aluminum resists the dents and corrosion that stamped-steel covers pick up in high-traffic floor locations, and it won't add the weight a cast plate would — relevant when the box itself is rated for a specific load.
• Prewired 20A duplex receptacle: The duplex outlet arrives pre-terminated at 20A, cutting field wiring time versus a bare cover plate that still needs an electrician to land conductors on-site. That's fewer billable hours per box on a multi-room rollout.
• Modular adapter openings (4COMM): The 4COMM configuration gives you four communication/AV module positions alongside the power receptacle, so a single floor box can carry HDMI, USB, network, or other AV Over IP connectivity without a second box cut into the floor.
• Ratchet-Pro mounting system: The Ratchet-Pro mechanism is Middle Atlantic's tool-less or low-tool leveling approach for seating the cover flush to finished floor — worth knowing if your crew is used to fighting screw-adjust covers on uneven concrete pours.
• 1DP single device plate footprint: The 1DP designation keeps this to a single-gang floor box footprint, so it drops into standard single-service floor box bodies without requiring a larger multi-gang cutout.
• TAA compliant: TAA compliance matters directly for any installation tied to federal, state, or other government-funded projects where Trade Agreements Act sourcing is a procurement requirement.
• 2-year manufacturer warranty: A 2-year term backs the cover assembly and receptacle against defects, which matters on a component that takes foot traffic and repeated plug/unplug cycles over its service life.

Integration & Compatibility

The RPAV3CTCAA is built to work within Middle Atlantic's Ratchet-Pro floor box product line, and the 4COMM modular openings accept compatible AV and data connectivity modules for jobs that combine power with structured cabling or AV Over IP distribution at the table. For rooms where this floor box feeds a display, conferencing codec, or in-table connectivity hub, pair the run with appropriate cables sized to the actual module count you're populating. Browse the full Middle Atlantic catalog for matching floor box bodies, and check the mounting solutions category if the same room also needs rack or display mounting hardware. For guidance on planning power and connectivity drops room by room, a learning hub resource on AV infrastructure planning can help confirm box count and module mix before you order.

Frequently Asked Questions

Q: Is the RPAV3CTCAA TAA compliant?

A: Yes, the RPAV3CTCAA is TAA compliant, which supports specification on federal and government-funded installations with Trade Agreements Act sourcing requirements.

Q: What's the warranty on the RPAV3CTCAA?

A: Middle Atlantic backs the RPAV3CTCAA with a 2-year manufacturer warranty.

Q: What receptacle does the RPAV3CTCAA include?

A: It ships prewired with a 20A duplex receptacle, so the electrical portion is factory-terminated before installation.

Q: What is the cover material on the RPAV3CTCAA?

A: The cover plate is aluminum.

Q: How many communication or AV module positions does the RPAV3CTCAA support?

A: It's configured as a 4COMM cover, providing four modular positions for AV or data connectivity alongside the power receptacle.

Q: How much does the RPAV3CTCAA weigh?

A: The kit weighs 3.00 lbs.

Eden Phillips

The detail that stands out on the Middle Atlantic RPAV3CTCAA is that the 20A duplex receptacle comes prewired from the factory — on a multi-room conference center rollout, that's real labor saved across every floor box on the job, not just a convenience on one unit.

Technical Highlights:

• Prewired 20A duplex: Factory termination means the electrician is landing a finished assembly into the box, not stripping and terminating conductors on-site for every single cover.
• 4COMM modular layout: Four adapter positions let one floor box carry AV, data, and power together — fewer floor penetrations than running separate boxes for power and signal.
• Aluminum construction at 3.00 lbs: Light enough to handle easily during install, but aluminum holds up to repeated foot traffic better than a thin stamped cover.

Deployment Considerations:

• Confirm the floor box body you're installing into matches the 1DP single-device footprint before ordering — this is a cover kit, not the box itself.
• The Ratchet-Pro leveling mechanism is worth understanding ahead of time if your crew normally levels covers with shims; it changes the install sequence versus a standard screw-adjust plate.

This is the right cover kit for a corporate boardroom or training room table box carrying a shared power-and-AV drop — a single-gang floor box feeding a display or conferencing codec where you want power and connectivity finished in one plate rather than two.