Middle Atlantic RPAV3CTCBK Ratchet-Pro Multiple Service Floor Box Kit

Overview

The RPAV3CTCBK is a Ratchet-Pro multiple service floor box kit from Middle Atlantic, finished in black and prewired with a 20A duplex receptacle. It's built for conference rooms, boardrooms, and open-office floor installations where you need in-floor power and cable access without running surface raceway across the room. The kit ships complete with an adapter ring and divider, so the receptacle and low-voltage cabling sides stay physically separated inside the same box — a detail that matters when an inspector is checking your floor box against code. At 3.00 lbs, it's a compact, self-contained unit rather than a fabricated enclosure you have to spec piece by piece.

Key Features

• Prewired 20A Duplex Receptacle: The power side of the RPAV3CTCBK arrives factory-wired, so the electrician on site is landing conductors at the box, not assembling a receptacle from parts. A 20A duplex handles two standard grounded plugs at a floor location, which covers most conference table power modules and AV cart drops without derating concerns.
• Adapter Ring Included: The adapter ring lets the box interface with the floor box housing and finished floor covering, so you're not sourcing a separate ring to match carpet, tile, or raised-floor thickness on a change order.
• Divider for Service Separation: A physical divider inside the box keeps the 20A power wiring segregated from low-voltage or data pathways run through the same floor box — standard practice for meeting separation requirements between power and communications cabling.
• Black Finish: A black cover blends into darker flooring and modern conference table finishes better than a bright metallic cover plate, which matters on a visible floor location where the box is part of the room's finished look.
• TAA Compliant: The RPAV3CTCBK carries TAA compliance, which matters directly if this floor box is going into a project funded under a federal or government contract with Trade Agreements Act sourcing requirements — without it, the SKU simply isn't eligible for those bids.
• Compact 3 lb Kit: At 3.00 lbs, the kit ships and handles easily as a single unit, so it doesn't add meaningful freight weight to a floor-box order that may include multiple units across a large conference or training room buildout.

Integration & Compatibility

The RPAV3CTCBK is designed as a multiple-service floor box, meaning the same enclosure is meant to carry both the prewired 20A duplex power circuit and a separate low-voltage or data pathway, kept apart by the included divider. That makes it a fit for rooms where you're landing both AC power and AV or network cabling at the same floor location — a huddle room table, a boardroom credenza drop, or a training room floor pocket. Because it's part of the Middle Atlantic Middle Atlantic catalog, it pairs naturally with the rest of a rack and furniture-accessory buildout from the same manufacturer if you're standardizing hardware across a room. For the broader category this kit belongs to, browse mounting solutions and floor and furniture accessories to round out a room's cable management plan. If you're scoping a full room power-and-data buildout, a PoE and low-voltage planning guide is a useful reference for deciding how much conduit and how many drops the space actually needs before you finalize floor box count and placement. Pair the RPAV3CTCBK with in-room cable and connector accessories to finish the run from the floor box to the table or wall plate, and consult a AV over IP resource page if the same floor location needs to carry AV signal alongside power.

What's in the Box

• 1x Ratchet-Pro floor box, black finish
• 1x Prewired 20A duplex receptacle
• 1x Adapter ring
• 1x Divider

Frequently Asked Questions

Q: Does the RPAV3CTCBK come prewired?

A: Yes. The RPAV3CTCBK ships with a prewired 20A duplex receptacle already installed, so the electrician lands conductors at the box rather than assembling the receptacle on site.

Q: What's included with the RPAV3CTCBK kit?

A: The kit includes the floor box itself, the prewired 20A duplex receptacle, an adapter ring, and a divider for separating power from low-voltage cabling.

Q: Is the RPAV3CTCBK TAA compliant?

A: Yes, the RPAV3CTCBK is TAA compliant, which is relevant for installations tied to federal or government-funded projects with Trade Agreements Act sourcing requirements.

Q: What color is the RPAV3CTCBK finished in?

A: The RPAV3CTCBK has a black finish.

Q: What's the warranty on the RPAV3CTCBK?

A: The RPAV3CTCBK carries a 2-year manufacturer warranty.

Q: How much does the RPAV3CTCBK weigh?

A: The RPAV3CTCBK weighs 3.00 lbs.

Jerry Tildsen

The RPAV3CTCBK is one I point integrators to when they need a floor box that shows up prewired instead of as a bag of parts. The 20A duplex receptacle is already landed at the factory, so the field work is limited to running conductors to the box and setting it in the floor pocket.

Technical Highlights:

• Prewired 20A Duplex: Two grounded outlets at 20A covers a conference table power module or an AV cart without load-splitting across boxes.
• Included Divider: Keeps the 20A power circuit physically separated from low-voltage or data pathways in the same box — the detail inspectors check for on mixed-service floor boxes.
• 3.00 lb Kit Weight: Light enough that shipping and handling multiple units for a multi-drop training room doesn't add real freight cost.

Deployment Considerations:

• The adapter ring is sized to interface with the floor covering at install — confirm your finished floor thickness (carpet, tile, raised access floor) matches before rough-in.
• This is a power-and-data floor box kit, not a surveillance or camera product — don't confuse the RPAV3CTCBK with imaging hardware when building a room's equipment list.

Specify the RPAV3CTCBK where a boardroom or training room floor location needs both a clean 20A power drop and a separate data pathway in one factory-prewired unit, rather than field-assembling a floor box from individual components.