Vivotek · AM-414_V01

Vivotek AM-414_V01 Corner Mount Bracket

Corner mount bracket for Vivotek cameras, 25 kg load, IP66 rated

• 25 kg capacity holds a camera body plus power box or PoE switch
• SPCC steel with white powder coat resists corrosion indoors and out
• Compact 240 × 341.6 × 233.4 mm footprint fits tight corner spaces

Axis · 5504-711

Axis 5504-711 Corner Bracket Mount

Corner bracket mount for dual-angle coverage at building intersections

• Positions single camera at corner junction to cover two adjacent walls
• Weather-resistant construction in RAL 9003 white, weighs only 1.8 kg
• Compatible with Axis P5414-E/15-E, Q1765-LE, Q1931-E, P33-VE cameras

Ubiquiti · UACC-G5-PTZ-CM

Ubiquiti UACC-G5-PTZ-CM Corner mount accessory for G5 PTZ.

Corner mount for Ubiquiti G5/G6 PTZ cameras

• Positions G5/G6 PTZ cameras at building corners, eliminating perimeter dead zones.
• Stainless steel and polycarbonate construction withstands outdoor and high-humidity environments.
• Compact 91.1 × 42.2 × 48.2 mm profile installs with included hardware, no special tools needed.

Axis · 5017-641

Axis T91A64 Corner Bracket White - 5017-641

Corner bracket for dual-wall coverage without a second camera

• Weather-resistant white finish handles outdoor rain, UV, and salt spray
• Compatible with Axis P55-series, Q60-series PTZ, and P33 pendant kits
• IK10-rated construction mounts to wall, pole, corner, or rack

Axis · 03158-001

Axis TP3302-E Corner Mount IK10 Reinforced - 03158-001

IK10 corner mount for dome cameras in high-impact environments

• IK10-rated reinforced structure resists vandalism and physical tampering
• Flips left or right for flexible positioning in varied corner layouts
• Sealed enclosure protects cables; repaintable finish blends with architecture

Ubiquiti · UACC-G5-PTZ-CM-B

Ubiquiti UACC-G5-PTZ-CM-B Corner mount accessory for G6/G5 PTZ.

Corner mount for Ubiquiti G5/G6 PTZ cameras at building edges

• Purpose-built corner bracket positions G5/G6 PTZ cameras at wall junctions.
• Passive mount with no cabling integration keeps corner installs clean and simple.
• Lightweight at 0.2 lb; load concern shifts entirely to your corner anchor point.

i-PRO · WV-QCN500-W

i-PRO WV-QCN500-W Corner Mount Bracket for Dome Cameras

Corner mount bracket for i-PRO dome cameras at 90-degree wall intersections

• Mechanical bracket design eliminates blind spots at building corners and wall junctions
• White finish blends into interior and exterior surfaces for reduced visual impact
• Steel construction holds dome cameras in fixed position without motorized drift

Axis · 5507-601

Axis T94R01B Corner Bracket Mount - 5507-601

Corner bracket mount for fixed dome and bullet cameras

• Powder-coated aluminum construction resists corrosion indoors/outdoors
• Compatible with AXIS T91E61 Wall Mount and small fixed dome cameras
• Standard hole pattern integrates with single gang junction boxes

ACTi · PMAX-0409

ACTi Corner Mount (for A7x Z714 Z724 Z8x Z9x Z972 - PMAX-0409

• OEM-fit corner mount engineered specifically for A7x, Z714, Z724, Z8x, Z9x, and Z972 models.
• Maintains original housing environmental and ingress ratings — no compromise from aftermarket substitutes.
• Documented MPN PMAX-0409 streamlines BOM entry, warranty tracking, and depot service referencing.

ACTi · PMAX-0402

Acti PMAX-0402 Corner Mount White

Corner mount for 8MP cameras with PoE power in white finish

• PoE (802.3af) eliminates separate power runs at corner installations
• Fits ACTi 8MP cameras and ONVIF-compliant IP cameras with standard form factors
• Wall and corner-mounted deployment in indoor and outdoor environments

ACTi · PMAX-0403

ACTi PMAX-0403 Corner Mount for Covert Cameras

• Corner mount positions covert/pinhole cameras to cover two perpendicular walls at once.
• Keeps camera body out of direct sightlines — ideal for aisle intersections and corridor junctions.
• Compatible with ACTi covert and pinhole camera series; verify model before ordering.

ACTi · SMAX-0009

Acti SMAX-0009 Corner Mount with Gooseneck for Outdoor

Corner mount with gooseneck for outdoor ACTi thermal cameras

• Adjustable gooseneck design for precise camera angle positioning
• PoE powered (802.3af) eliminates separate power infrastructure
• Outdoor-rated construction for perimeter and facility monitoring

Axis · 03003-001

Axis 03003-001 Corner Bracket Mount

Corner bracket mount with IK8 vandal resistance for wall junctions

• IK8 impact rating withstands 5-joule strikes at exposed corners
• Compact low-profile design minimizes visual footprint in retail/commercial
• Axis-standard mounting interface simplifies installation without custom drilling

Axis · 02648-001

Axis TQ1303-E Corner Mount - 02648-001

Corner mount for Axis IP cameras, indoor/outdoor weather-resistant

• Weather-resistant construction rated for outdoor environments
• Secure, stable positioning optimized for corner installations
• Compatible with Axis IP camera models for straightforward integration

Axis · 03159-001

Axis TQ5301-E Corner Mount for PTZ Cameras - 03159-001

IP66/IK10 corner mount for Axis PTZ cameras in outdoor deployments

• IP66 rating seals against rain and dust; IK10 impact resistance stops vandalism
• Adjustable left or right-side mounting eliminates custom fabrication needs
• Weather-resistant materials and paintable exterior for corner integration

Digital Watchdog · DWC-XPZACNM

Digital Watchdog DWC-XPZACNM Corner Mount White

• Corner mount bracket for wall-ceiling or wall-wall junctions
• White finish for low-visibility retail and lobby installs
• Positions camera lens perpendicular to corner for full FOV

FLIR · 421-0066-00

FLIR Corner Mount KIT - 421-0066-00

• Corner mount kit for FLIR cameras on wall junctions
• Adjustable to accommodate varied wall corner angles
• Powder-coated aluminum/stainless for outdoor weather resistance

Geovision · 81-MT30000-0001

Geovision 81-MT30000-0001 300 Convex Corner Adapter

• Convex corner profile routes cables cleanly around interior and exterior building corners.
• Designed for Geovision mounting systems, ensuring proper camera alignment at corner placements.
• Protects cable runs at corner transitions, reducing wear and maintaining installation integrity.

Geovision · 81-MT30010-0001

Geovision 81-MT30010-0001 Convex Corner Adapter

• Convex corner design enables simultaneous coverage of two perpendicular surfaces.
• Engineered for Geovision IP PTZ camera systems, ensuring verified mechanical fit.
• Complete adapter kit includes all mounting components for corner installations.

Geovision · 81-MT31010-0001

Geovision 81-MT31010-0001 Concave Corner Adapter

• Enables interior corner mounting for Geovision IP PTZ cameras without sacrificing PTZ travel.
• Mounting hardware and fasteners included, reducing jobsite parts sourcing for corner deployments.
• Supports multiple mounting angles and orientations to optimize corner coverage in any facility layout.

Geovision · 81-MT50100-0000

Geovision 81-MT50100-0000 Convex Corner Box Mount

• Corner-specific geometry eliminates shimming and custom fabrication on convex surfaces.
• Supports IP PTZ camera loads (8–15 kg) without alignment drift or bracket flex.
• Corrosion-resistant hardware suits outdoor perimeter, parking, and retail deployments.

Hanwha · HT-SD-CM

Hanwha HT-SD-CM Corner Mount Adapter

Corner mount adapter for hazardous-area surveillance in stainless steel

• 316L stainless steel construction resists corrosion indoors and outdoors
• Mounts to HT-SD-WM and HT-F1XX-WM wall mount systems for corner placement
• Rated for Class I Division 1/2 hazardous locations and explosive atmospheres

Hanwha · HT_SD-CM

Hanwha HT_SD-CM Corner Mount (L)

• Hanwha 2MP corner mount camera with IP66 weather sealing
• Powder-coated aluminum for coastal and spray-down environments
• PoE 802.3af with H.265 compression and WDR imaging

Hanwha · SBD-140KMB

Hanwha SBD-140KMB Corner Mount Adapter

SUS304 stainless steel corner mount for Hanwha Q/QN/QNE/LND/ANE cameras

• White RAL9003 finish, 121×102.5mm compact size fits discrete corner installations
• SUS304 stainless steel resists corrosion in indoor and outdoor environments
• Compatible with 20+ Hanwha camera models across Q, QN, QNE, LND, and ANE series

Hanwha · SBL-101C

Hanwha SBL-101C Remote Head Camera Corner Mount

White polycarbonate corner mount for Hanwha SLA and XNB cameras

• Fits discreetly in corners while securing remote camera heads in place
• Compatible with SLA-T4680, SLA-T2480, PNM9000QB, XNB-6001 and variants
• Durable polycarbonate construction rated -10°C to +45°C operating range

Hanwha · SBP-156KMW

Hanwha SBP-156KMW White Corner Mount Adapter

Corner mount adapter for Hanwha cameras, IP66 rated, 6 kg capacity

• IP66 rated aluminum construction handles outdoor rain, dust, and spray
• 6 kg load capacity supports most compact and mid-range Hanwha cameras
• Corner-specific geometry covers two perpendicular surfaces from one mount

Hanwha · SBP-300KM1

Hanwha SBP-300KM1 Corner Mount Base

Compact aluminum corner mount for outdoor surveillance in tight spaces

• Aluminum construction resists corrosion in coastal and industrial environments
• Slim 185×115×40mm footprint fits building corners without obstructing sightlines
• Lightweight at 1.65 lbs for easy one-person installation on masonry or concrete

Hanwha · SBP-300KMS

Hanwha SBP-300KMS Stainless Steel Corner Mount

Stainless steel corner mount with IP66 weatherproof rating for tight spaces

• IP66 rated for dust and moisture protection in outdoor surveillance
• Stainless steel construction resists corrosion in harsh environments
• Compatible with SBP-300WMS and SBP-300WMS1 camera models

Hanwha · SBP-300KMW1

Hanwha SBP-300KMW1 Corner Mount Base

Corner mount for Hanwha IP cameras in tight architectural spaces

• Aluminum alloy construction rated -50°C to 50°C for indoor and outdoor
• Compact 228.5 x 173.5 x 91.2 mm footprint fits flush in corner pockets
• Compatible with Hanwha Techwin X, Q, P series and Wisenet IP cameras

Honeywell · HA35CNM01

Honeywell HA35CNM01 35S Corner Mount

• Corner mount form factor enables stable, angled deployment with minimal floor footprint.
• Wired connectivity ensures reliable, interference-free operation at fixed installation points.
• Compatible with optional accessories (HA354SC01, HA35CLM02) for configurable staging setups.

i-PRO · PACA2B

i-PRO Corner Mount Bracket Beige - PACA2B

• Corner-mount design eliminates custom fabrication for constrained wall installations.
• Pre-drilled holes reduce field labor time during i-PRO camera deployments.
• Beige powder-coat finish integrates discreetly into commercial interior environments.

i-PRO · WV-QCN500S-G

i-PRO WV-QCN500S-G Corner Mount Bracket

90-degree corner mount for i-PRO cameras in tight spaces

• Dual-surface aluminum bracket distributes load across two walls
• ISO14993 salt damage prevention rated for -50°C to +60°C
• Ideal for corridors, stairwells, and building perimeter corners

i-PRO · WV-QCN500S-W

i-PRO WV-QCN500S-W Corner Mount Bracket

90-degree corner bracket for i-PRO cameras in tight spaces

• Dual-surface aluminum mount distributes weight across both walls
• ISO 14993 salt-damage prevention rated for coastal environments
• Operates -50°C to +60°C with corrosion-resistant powder coating

Pelco · CM400

Pelco CM400 Corner Mount Adapter for IWM Wall Mount

90-degree corner adapter for Pelco IWM wall mounts

• Positions cameras at inside or outside corners for dual-wall coverage
• Aluminum construction available in standard or RAL9003 white finish
• Compatible with full Pelco IWM wall mount series

Pelco · CM400-SW

Pelco CM400-SW Corner Mount IWM White

Corner mount adapter for 90-degree IWM installations in white

• RAL9003 signal white finish matches Pelco Spectra 7 PTZ cameras
• Metal construction with powder coat for interior professional spaces
• Compatible with Pelco IWM indoor wall mount system variants

Pelco · CRNMT-1001

Pelco CRNMT-1001 Corner Mount for WLMT-1001

90-degree corner mount for heavy pendant cameras on WLMT-1001

• Positions large pendant cameras at building corners for dual-zone coverage
• Designed exclusively for WLMT-1001 bracket systems and Pelco cameras
• Requires weight verification; corner surfaces only, not flat walls