Hanwha SBP-300KM1 Corner Mount Base
Overview
The SBP-300KM1 is a purpose-built corner mount base for surveillance camera installations where building edges and tight spaces demand a compact footprint without sacrificing structural stability. Aluminum construction resists corrosion in outdoor and demanding environments, making this accessory suitable for perimeter monitoring, building corners, and edge-mounted deployments across surveillance camera installations. The ivory finish blends into standard architectural elements, reducing visual impact on exterior walls.
Key Features
- Aluminum construction: Resists oxidation and salt-air corrosion far better than steel, extending mount lifespan in coastal or industrial environments without requiring frequent repainting or protective coatings.
- Compact corner design: At 185mm wide × 115mm tall × 40mm deep (7.28" × 4.53" × 1.57"), the SBP-300KM1 fits snugly into corner installations where larger bases would obstruct sightlines or create aesthetic conflicts on building facades.
- Lightweight at 1.65 lbs: Reduces structural load on mounting surfaces and simplifies one-person installation on masonry, concrete, or metal substrates — no need for reinforced anchoring hardware in most cases.
- Ivory finish: Matches standard building trim and wall colors, making the mount visually discrete and reducing the appearance of surveillance infrastructure on customer-facing or residential properties.
- Engineered for outdoor exposure: Aluminum's inherent weather resistance means the mount will not rust, swell, or degrade when exposed to rain, UV, temperature cycling, and humidity — a key factor for installations where replacement or repair access is difficult (e.g., high rooflines or industrial perimeters).
- Stable mounting platform: The rigid corner base provides the rigidity needed to keep cameras plumb and aligned over months and years of thermal expansion, wind load, and vibration — drift in mount angle translates directly to missed coverage or distorted Wide-area monitoring.
Compatibility & Integration
The SBP-300KM1 is designed as a corner-mounted solution for standard IP cameras with conventional ball-joint or pan-tilt mounts. Verify that your camera's mounting interface (standard 1/4"-20 tripod thread or proprietary quick-release adapter) is compatible with the base before deployment. This mount works across most major camera vendors, including Hanwha's own Hanwha surveillance camera lineup, as well as third-party brands using universal mounting standards. For installations requiring additional angle adjustment or rotation, pair this base with a compatible gooseneck or ball mount accessory. If your camera requires cable strain relief or a weatherproof conduit entry, plan for separate protective ducting or conduit clips alongside this base.
When to Choose a Different Mount
If you need significant pan-tilt adjustment capability after installation, consider a ball-joint or gooseneck adapter mount instead of a fixed corner base. If your camera must rotate to track moving subjects, or if you anticipate frequent repositioning, a corner base is not the right choice — opt for a wall or ceiling mount with full articulation. For installations requiring integrated cable strain relief, weatherproof junction boxes, or surge protection, look for combination mount-and-enclosure solutions from the same manufacturer.
Installation Considerations
Corner mounting is ideal for wide-area perimeter coverage because it minimizes blind spots along two walls simultaneously. However, verify that your corner location provides adequate clearance for camera lens focus distance — if subjects are closer than the camera's minimum focus distance, move the camera back or choose an alternative mount position. In high-wind areas or on tall structures, secure the base with stainless-steel fasteners (not supplied) rated for your local wind load. Inspect the mounting surface for cracks, loose mortar, or deterioration before installation — a failing substrate will compromise the base's stability over time.
Frequently Asked Questions
Q: Is the SBP-300KM1 suitable for permanent outdoor installation?
A: Yes. Aluminum resists corrosion in rain, UV, and temperature swings. Use stainless-steel fasteners to avoid galvanic corrosion where aluminum meets steel anchors.
Q: Can I angle the camera after mounting the SBP-300KM1?
A: The corner base itself is fixed. Add a ball-joint or gooseneck adapter on top for tilt and pan adjustment.
Q: What fasteners are required for installation?
A: Fasteners depend on your mounting surface (masonry anchors for concrete, lag bolts for wood, machine screws for metal). The base does not include mounting hardware — source anchors rated for outdoor use and your substrate type.
Q: Will the ivory finish show dirt or weathering?
A: Ivory is lighter and may show dust or pollen more visibly than dark colors. Periodic cleaning with mild soap and water will restore appearance.
Q: Is the SBP-300KM1 compatible with all IP camera brands?
A: It supports any camera with a standard 1/4"-20 tripod mounting thread. Verify your camera's mount interface before purchasing.
Q: What is the maximum camera weight the SBP-300KM1 can support?
A: The base itself is lightweight and rigid, but weight capacity depends on your fastening method and mounting surface. Consult the mounting surface's specifications and use appropriate anchors for cameras over 5 lbs.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The SBP-300KM1 solves a real problem in outdoor surveillance deployments: mounting a camera at a building corner without adding bulk or visual clutter. At 1.65 lbs and compact at 7.28" × 4.53" × 1.57", this base slides into the tightest corner geometries while aluminum construction guarantees you won't be pulling it down in three years due to rust or galvanic failure on masonry.
Technical Highlights:
- Aluminum body resists corrosion: Outdoor aluminum naturally oxidizes into a protective layer that halts further degradation — unlike steel, which requires paint or coating maintenance every 2–4 years in salt air or industrial environments.
- Compact footprint (40mm depth): Minimal standoff from the wall means the camera sits flush to the corner, reducing snag hazards, vandalism targets, and visual obstruction of building aesthetics — critical on retail or residential facades where discretion matters.
- Lightweight (1.65 lbs) reduces fastener load: You can anchor this base with standard masonry anchors rated for moderate loads; you don't need engineer-spec anchors or reinforced concrete — a real cost and scheduling win on retrofit jobs.
Deployment Considerations:
- Fasteners are your responsibility — Hanwha doesn't supply them. Source stainless steel anchors matched to your substrate (masonry, wood, metal frame). Galvanized or plain steel fasteners will corrode and eventually seize or fail.
- Verify your camera's mount thread (standard 1/4"-20 tripod) before you order; some cameras use proprietary quick-release interfaces that won't fit without an adapter.
- The base is fixed — no built-in tilt or pan. If you need angle adjustment post-installation, source a ball mount or gooseneck adapter separately and place it atop the SBP-300KM1.
Deploy the SBP-300KM1 on perimeter corners where you want minimal visual footprint and long service life without maintenance. It's the right choice for retail buildings, industrial warehouses, and residential properties where the mount must disappear into the corner and stay there for five years without rust or failure.
