Camera Mounting Hardware
Showing Results for Camera Mounting Hardware
-
Add to Cart The item has been addedi-PRO
SKU: WV-QSR507F-W
i-PRO WV-QSR507F-W Wall Mount Bracket 1.5 NPS
Wall bracket for i-PRO dual-sensor cameras, 1.5" NPS thread, 25mm depth
- ISO female parallel (Rp 1-1/2) accepts standard male taper connections
- 25.4 mm stand-off depth allows cable routing behind camera body
- White powder-coat steel finish for indoor corporate and retail environments
In stock · Ships same business day$148.40 $147.99 Save $0.41The item has been added -
Add to Cart The item has been addedi-PRO
SKU: WV-QSR503-W
i-PRO WV-QSR503-W 4-Screw Dome Mount Bracket White
4-screw dome bracket for ceiling/wall mounting up to 11 lbs
- 4-screw pattern distributes load across four anchor points for stability
- Mounts on ceiling or wall surfaces without requiring additional brackets
- White finish integrates with standard commercial ceiling installations
In stock · Ships same business day$70.80 $69.99 Save $0.81The item has been added -
Add to Cart The item has been addedAxis
SKU: 02437-001
Axis TW1104 Magnetic Mount 5-Pack - 02437-001
Tool-free magnetic mounts for Axis IP cameras on steel surfaces
- 5-pack of ferrous-surface magnets; no drilling, fasteners, or wall damage
- Secure hold on steel beams, shelving, and equipment frames without vibration slip
- Reposition in seconds; ideal for warehouses, retail, and temporary deployments
In stock · Ships same business day$469.00 $453.99 Save $15.01The item has been added -
Axis
SKU: 02321-001
Axis TW8100 Rack Mount System Controller - 02321-001
1U rack mount consolidates 5 controllers with dual Gigabit per unit
- Stack 5 W800 System Controllers in single 1RU space, reducing footprint by ~80%
- Each controller retains independent dual Gigabit Ethernet for network redundancy
- Passive cooling with optimized airflow; unified power via single rack PDU connection
$179.00 $172.99 Save $6.01The item has been added -
i-PRO
SKU: WV-QWL501-W
i-PRO WV-QWL501-W Wall Mount Bracket White
Wall-mounted bracket for direct i-PRO camera surface attachment
- White finish integrates into office, retail, and warehouse environments
- Direct wall attachment eliminates ceiling penetrations and retrofit costs
- Verify i-PRO model compatibility before purchase—mounting is camera-specific
In stock · Ships same business day$94.60 $93.99 Save $0.61 -
Pelco
SKU: NPTA-1201
Pelco NPTA-1201 1.5 NPT Pipe Adapter
1.5" NPT pipe adapter for Pelco pendant mount camera systems
- Female-to-female coupling threads standard 1.5" NPT connections
- OEM Pelco component for secure fit in surveillance installations
- NDAA Section 889 compliant for government and critical infrastructure
$73.50 $72.99 Save $0.51The item has been added -
Add to Cart The item has been addedPelco
SKU: UEBP0AA
Pelco UEBP0AA Parapet Bracket ULISSE EVO
Parapet bracket for ULISSE EVO PTZ cameras with internal cable routing
- RAL9002 powder coat finish resists corrosion in outdoor flat-roof installations
- Internal cable channels route power and communications through bracket body
- NDAA Section 889 compliant for government and institutional deployments
In stock · Ships same business day$85.00 $84.99 Save $0.01The item has been added -
Add to Cart The item has been addedPelco
SKU: WLMT-1021
Pelco WLMT-1021 Pendant Arm 20cm 1.5in NPT
Compact 20cm pendant arm with 1.5" NPT for drywall and interior mounts
- 20cm length reduces structural load and moment stress on lightweight walls
- 1.5-inch NPT threading integrates with standard Pelco camera mount stacks
- Fits confined spaces and interior corridors where full-length arms won't fit
In stock · Ships same business day$110.25 $109.99 Save $0.26The item has been added -
Axis
SKU: 02528-001
Axis TS3901 Rail Extensions for S3016 - 02528-001
Rail extensions for S3016 recorder in 499–689 mm deep racks
- Adjustable 499–689 mm post-to-post range fits non-standard rack depths
- Enterprise-grade steel construction for stable recorder mounting in data centers
- Direct integration with Axis S3016 Recorder without additional adapters
$33.00 $31.99 Save $1.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02126-001
Axis TW1100 Tool-Free Clip Mount Attachment - 02126-001
Tool-free clip mount with 360° rotation for Axis body-worn cameras
- Instant attachment and repositioning without tools or fasteners
- 360-degree rotation locks angle for any viewing direction without removal
- High-resilience clip maintains secure hold through running and tactical movement
In stock · Ships same business day$119.00 $114.99 Save $4.01The item has been added -
Axis
SKU: 02129-001
Axis TW1103 Chest Harness Mount - 02129-001
Chest harness mount for hands-free Axis body camera operation
- Adjustable straps accommodate variable body sizes for secure fit
- Complete kit includes harness, straps, and mounting hardware
- Ergonomic chest position keeps camera stable during active work
$199.00 $192.99 Save $6.01The item has been added -
Axis
SKU: 02689-001
Axis TW1106 Magnet Mount Body Worn Camera 5-Pack - 02689-001
Magnetic mount for AXIS W110 body camera—quick attach/detach on fabric
- 5-pack of magnetic mounts for the Axis W110 body cam
- Attaches to fabric without adhesives or fasteners
- Standard squad-issue accessory for patrol uniforms
$139.00 $133.99 Save $5.01The item has been added -
Axis
SKU: 02690-001
Axis TW1107 Magnet Mount Accessory - 02690-001
Magnetic mount for Axis cameras—tool-free positioning without surface damage
- Strong magnetic grip holds cameras securely across varied surfaces without tools
- Vibration-resistant design maintains stable positioning in dynamic environments
- Compatible with most Axis cameras equipped for magnetic mounting capability
$159.00 $153.99 Save $5.01The item has been added -
Axis
SKU: 02966-001
Axis TW1108 Screw-on Mount - 02966-001
Screw-on mount for Axis cameras, wood/metal/concrete, indoor-outdoor
- Corrosion-resistant steel construction rated for indoor and outdoor use
- Low-profile design fits wood, metal, and concrete mounting surfaces
- Quick screw-on installation for Axis fixed dome and bullet cameras
$105.00 $100.99 Save $4.01The item has been added -
Digital Watchdog
SKU: DW-DTCAW
Digital Watchdog DW-DTCAW White Conduit Cable Entry Adaptor
- Conduit cable entry adaptor for Digital Watchdog cameras
- White finish blends with standard building infrastructure
- Indoor/outdoor rated for clean cable management at the camera
$160.00 $159.99 Save $0.01The item has been added -
Digital Watchdog
SKU: DW-DTWMDTLA5
Digital Watchdog DW-DTWMDTLA5 Mounting Bracket
- Mounting bracket for Digital Watchdog camera installations
- Multi-angle install supports varied wall and ceiling geometries
- 5-year limited warranty - drops onto DW camera mount hardware
$181.00 $180.99 Save $0.01The item has been added
Camera Mounting Hardware
Camera mounting hardware includes brackets, adapters, and structural support components used to secure surveillance devices in commercial environments. Proper hardware selection ensures stable positioning, clean cable management, and long-term installation durability.
Plan Your Deployment
- Camera model compatibility and mounting interface
- Wall, ceiling, pole, or corner installation type
- Indoor vs outdoor environmental requirements
- Load-bearing capacity and structural support needs
- Future service access and upgrade planning
Camera Mounting Hardware — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 192 working models of camera mounting hardware sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 0MP, 2MP, Thermal |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE++, PoE |
| Type | Accessory, Dome, Adapter, PTZ, Turret |
| Durability | Indoor/Outdoor, Outdoor |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.