Illuminators
Showing Results for Illuminators
-
Add to Cart The item has been addedAxis
SKU: 01214-001
Axis T90D40 IR-LED Illuminator AC/DC - 01214-001
IR illuminator with 105–500m range and interchangeable lenses for Axis cameras
- Swap beam angles from 10° to 140° without tools for near or distant coverage
- 12/24V DC or AC power; integrate with PoE or standalone supply
- IP66 and IK09 rated aluminum housing for -50°C to 50°C outdoor operation
In stock · Ships same business day$1,369.00 $1,326.99 Save $42.01The item has been added -
Axis
SKU: 5800-931
Axis T90B Wireless Remote Control - 5800-931
Wireless remote control for Axis IR and White Light LED cameras
- Wi-Fi wireless operation adjusts illumination settings without camera access
- Compact battery-powered design for extended use across multi-camera deployments
- Compatible with Axis network cameras equipped with IR and White Light LEDs
$41.00 $39.99 Save $1.01The item has been added -
Axis
SKU: 01215-001
Axis T90D25 W-LED Illuminator AC/DC - 01215-001
White LED illuminator with 4 interchangeable angles, 25–110m range
- Four beam angles (10°–80°) adjust from focused to wide coverage in seconds
- IP66 and NEMA 4X rated for dust, moisture, and extreme temps (-50°C to 50°C)
- IK09 impact-resistant aluminum/polycarbonate construction withstands vandalism
$509.00 $492.99 Save $16.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01210-001
Axis T90D20 IR-LED Illuminator AC/DC - 01210-001
IR illuminator with 4 swappable lenses, 36–144m range, IP66/IK09
- Four interchangeable lens modules (10°–80° angles) match any deployment geometry
- IP66 waterproof + IK09 impact-resistant housing for outdoor unattended use
- AC/DC dual power input (12/24V DC or AC mains) integrates with existing systems
In stock · Ships same business day$509.00 $492.99 Save $16.01The item has been added -
Axis
SKU: 01216-001
Axis T90D25 White LED PoE Illuminator - 01216-001
White-LED PoE illuminator with 4 lens options, 25–110m range
- Four interchangeable lenses (10°–80°) adapt beam width to narrow or wide coverage
- PoE+ powered with no additional cabling; IP66/NEMA 4X for dust and moisture
- IK09 aluminum housing rated –50°C to +50°C for extreme climates
$509.00 $492.99 Save $16.01The item has been added -
Vivotek
SKU: AI-108
Vivotek AI-108 24W Adjustable IR Illuminator
200m IR illuminator with adjustable 10–30° beam for outdoor surveillance
- 850nm near-infrared reaches 200 meters in total darkness without visible light
- Beam angle adjusts 10° to 30° via DIP switch or RS-485 for precise coverage
- Auto light sensor triggers IR at 100 Lux (adjustable) for day/night switching
$428.00 $297.99 Save $130.01The item has been added -
Axis
SKU: 01218-001
Axis T90D35 White LED PoE Illuminator - 01218-001
PoE+ white-LED illuminator with swappable lenses for Axis cameras
- Four interchangeable beam angles (10°–80°) reach 35–180m lens-dependent
- PoE+ powered—no separate electrical runs or conduit needed on-site
- IP66/IK09 aluminum housing rated -50°C to +50°C for outdoor extremes
$849.00 $822.99 Save $26.01The item has been added -
Axis
SKU: 02771-001
Axis 02771-001 TQ1919-E IR Illuminator Kit
- 940nm invisible IR illuminator kit pairs with 1 MP Axis cameras
- IP66/IP67 plus IK10 vandal-rated housing for outdoor installs
- No visible IR spillover - covert nighttime surveillance illumination
$159.00 $153.99 Save $5.01The item has been added -
Axis
SKU: 01534-001
Axis P1375-E Fixed Box IR Illuminator Kit - 01534-001
50m IR illuminator for AXIS P1375-E box camera, PoE powered
- 50-meter IR range with 850nm optimized lighting for complete darkness
- PoE powered directly from camera—no auxiliary power supply required
- IP67 rated, IK10 impact resistant fixed box design with mounting bracket
$119.00 $114.99 Save $4.01The item has been added -
Axis
SKU: 5801-901
Axis PT IR Illuminator Kit C 850nm - 5801-901
850nm IR illuminator kit for T99A positioning units with swappable lenses
- Paired 850nm infrared LEDs with three interchangeable lenses for wide or focused coverage
- Metal mounting bracket included; IP66-rated for outdoor perimeter and parking lot use
- Covert nighttime illumination without visible light for 24/7 surveillance capability
$2,069.00 $2,005.99 Save $63.01The item has been added -
Axis
SKU: 01211-001
Axis T90D20 IR-LED Illuminator PoE - 01211-001
IR illuminator for Axis cameras, 36–144m range, PoE+ powered
- Four interchangeable lenses (10°–80°) match beam angle to camera FOV
- Reaches 144 meters IR distance for large perimeter and vehicle coverage
- IP66/IK09 rated aluminum housing, −50°C to +50°C operating range
In stock · Ships same business day$509.00 $492.99 Save $16.01 -
Axis
SKU: 01212-001
Axis T90D30 IR-LED Illuminator AC/DC - 01212-001
IR illuminator 70–350m range, four interchangeable lenses, IK09 vandal-rated
- Four beam angles (10°–80°) let you dial coverage from narrow spot to wide flood
- Reaches 350 meters in darkness; operates -50°C to +50°C for extreme climates
- IK09 impact-resistant aluminum housing rated IP66 for outdoor/industrial use
$909.00 $880.99 Save $28.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01213-001
Axis T90D30 IR-LED Illuminator PoE - 01213-001
PoE+ IR illuminator with 70–350m range and swappable beam angles
- Four interchangeable lenses (10°, 35°, 60°, 80°) adapt coverage from distant perimeters to near zones
- PoE+ powered—no separate power cables or conduit runs needed on network camera deployments
- IP66/IK09 aluminum housing rated -50°C to +50°C for outdoor and extreme climates
In stock · Ships same business day$909.00 $880.99 Save $28.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01217-001
Axis T90D35 White LED Illuminator AC/DC - 01217-001
White LED illuminator with 4 lens angles, 35–180m range, IP66/IK09
- Swap between 10°, 35°, 60°, 80° lenses tool-free to match your coverage zone
- 12/24 V DC or AC input eliminates separate power supply in most installs
- IP66 weatherproof, IK09 impact-resistant housing rated −50°C to 50°C
In stock · Ships same business day$909.00 $880.99 Save $28.01The item has been added -
Axis
SKU: 01181-001
Axis T99 Illuminator Bracket Kit A - 01181-001
Dual T90 illuminator bracket for Q8685-E and T99A10 positioning systems
- Mounts two T90 white-LED or IR-LED illuminators for coordinated low-light coverage
- Professional bracket with integrated cable glands, connectors, and management ties
- Complete hardware kit includes fitting brackets, screws, washers, and connectors
$229.00 $221.99 Save $7.01The item has been added -
Axis
SKU: 02195-001
Axis TQ1902-E IR Illuminator Kit - 02195-001
50m IR + white LED illuminator, camera-powered, 120° coverage
- 850 nm IR LEDs reach 50 m (164 ft); white LED extends 25 m for detail
- Camera-powered operation at 8 W typical—no separate supply needed
- 120° wide illumination angle with aluminum/polycarbonate build for outdoors
$169.00 $162.99 Save $6.01The item has been added
Illuminators
Illuminators provide supplemental lighting for surveillance cameras operating in low-light or nighttime conditions. Infrared and visible-light options enhance image clarity, extend detection range, and support consistent performance in challenging environments.
Plan Your Deployment
- Infrared vs visible light application requirements
- Coverage distance and beam angle alignment
- Camera sensitivity and wavelength compatibility
- Indoor vs outdoor environmental considerations
- Power consumption and electrical planning
Illuminators — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 57 working models of illuminators sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 0MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired, Wi-Fi |
| Power | AC/DC, PoE, PoE+, PoE++ |
| Type | Accessory, Illuminator |
| Durability | Outdoor |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.