Accessory Kits
Showing Results for Accessory Kits
-
Add to Cart The item has been addedAxis
SKU: 5506-531
Axis F8225 Pinhole Accessory Mount - 5506-531
Discreet ceiling mount for AXIS F1025 pinhole sensor with 92° view
- 92° horizontal field of view covers rooms and doorways without visible hardware
- Repaintable finish blends into ceiling for covert installation in offices and retail
- IP68-rated with PoE+ power and microphone support for integrated audio monitoring
In stock · Ships same business day$41.00 $40.99 Save $0.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01802-001
Axis 01802-001 Dome Intrusion Switch
Dome intrusion switch for Axis cameras with IP66 weatherproofing
- Detects physical tampering or unauthorized dome access via normally-open dry contact
- IP66 rating handles rain, spray, and dust in outdoor or wet-environment mounts
- Direct integration with Axis dome cameras—no modifications or adapters required
In stock · Ships same business day$20.00 $19.99 Save $0.01The item has been added -
Axis
SKU: 03466-001
Axis 03466-001 TD2903-E Cable Kit - An accessory kit that allows
- Cable extension kit for Axis TD2903-E thermal detector installs
- Adds reach from sensor mount point to junction box termination
- Maintains conductor gauge for extended thermal sensor cable runs
$129.00 $124.99 Save $4.01The item has been added -
Axis
SKU: 03100-001
Axis TM3826-E Smoked Dome Accessory Pack - 03100-001
Pack of 4 smoked replacement domes for M4225/4227/4228-LVE cameras
- 4-pack of smoked dome covers for the Axis TM3826-E
- Replacement consumable for high-glare environments
- Direct-fit OEM swap with 5-year warranty
$109.00 $104.99 Save $4.01The item has been added -
Digi International
SKU: 76002084
Digi International 76002084 WR54 Accessory Kit - Single Cellular
Single cellular module kit for WR54 industrial routers—remote sites & failover
- WR54 accessory kit for single cellular deployments
- Mounting and antenna components in one kit
- 4.5 lb bundle for industrial router installs
$521.00 $478.99 Save $42.01The item has been added -
Digi International
SKU: 76002113
Digi International 76002113 IX30 Accessory Kit
Essential accessory kit for Digi IX30 industrial cellular router deployment
- Dedicated accessory kit for the Digi IX30 cellular router platform
- Includes deployment components in a 10.5 x 8.0 x 2.2 in package
- 5-year warranty backs cellular install longevity in field cabinets
$225.00 $206.99 Save $18.01The item has been added -
Digi International
SKU: 76002136
Digi International 76002136 TX40 5G Accessory Kit
Complete mount and cable kit for Digi TX40 5G router deployment
- Accessory kit extends Digi TX40 5G mobile router functionality
- Includes mounting hardware, cables, and connector components
- Compact 8.0 x 6.0 x 4.0 in kit at 2.3 lbs with 5-year warranty
$707.00 $648.99 Save $58.01The item has been added -
Digi International
SKU: 76002137
Digi International 76002137 TX40 Accessory Kit
Complete accessory kit for TX40 system installation and field deployment
- Accessory kit for Digi TX40 security and networking infrastructure
- Compact 9.0 x 3.0 x 8.0 in transport size at 1.0 lbs for field techs
- 5-year warranty covers TX40 installation accessory components
$529.00 $485.99 Save $43.01The item has been added -
Add to Cart The item has been added
Digi International
SKU: 76002147
Digi International 76002147 IX 5G Accessory Kit
IP55 accessory kit for Digi IX 5G industrial routers and gateways
- Accessory kit supports 5G cellular IoT installations
- -20C to 70C operating range for harsh-environment deployment
- UL/CSA, CE, GS, UKCA, SAA certifications for global compliance
$132.23 $131.99 Save $0.24The item has been added -
Epson
SKU: BOX-T88II
Epson BOX-T88II Receipt Printer Accessory Kit
Wi-Fi receipt printer box kit for T88II, T88III, T88IV models
- OEM packaging box for T88II/T88III/T88IV receipt printers
- Wi-Fi-equipped unit at 500 mm/s print speed
- Replacement protective box across mixed POS environments
$19.30 $18.99 Save $0.31The item has been added -
FLIR
SKU: 324-0004-00
FLIR Hard Case w/foam - 324-0004-00
- Hard-shell transport case with FLIR-specific foam cutouts
- Lockable latches prevent in-transit opening during shipping
- High-impact polymer protects thermal optics from drops
$2,049.00 $1,497.99 Save $551.01The item has been added -
FLIR
SKU: 324-0005-00
FLIR PT-Series Hard Case w/foam - 324-0005-00
- Hard transport case for FLIR PT-Series cameras
- Custom foam inserts cradle PT-Series thermal optics
- Lockable latches prevent in-transit case opening
$2,089.00 $1,526.99 Save $562.01The item has been added -
Geovision
SKU: 240-POSTS-002
Geovision 240-POSTS-002 POS Text Sender Dongle 2 Ports
- Dual POSINT ports support multiple POS terminals without additional interface hardware.
- Native Geovision integration eliminates middleware, reducing deployment time and support overhead.
- Real-time transaction-to-video sync enables precise forensic review of voids, refunds, and sales.
$200.00 $199.99 Save $0.01The item has been added -
Geovision
SKU: 46-DE21620-0001
Geovision 46-DE21620-0001 Accessory
Geovision accessory component for NVR system integration and deployment
- Integrates with compatible Geovision cameras, NVRs, and management software.
- Compact 7×6×1 in form factor fits standard rack and enclosure mounting layouts.
- 3-year warranty provides long-term coverage for professional deployments.
$20.99The item has been added -
Geovision
SKU: 54-BXWIUSB-MP02
Geovision 54-Bxwiusb-MP02 Gv-Wifi Adapter V2
- Adds WiFi connectivity to supported Geovision IP PTZ cameras via direct integration.
- Eliminates hardwired Ethernet runs where cable routing is impractical or restricted.
- V2 generation module delivers updated compatibility with select Geovision PTZ platforms.
$58.00 $57.99 Save $0.01The item has been added -
Geovision
SKU: 55-CTRLC-000
Geovision 55-CTRLC-000 Control Center Dongle
- Integrates directly with Geovision Control Center software via USB—no third-party drivers needed.
- CM-rated cable meets indoor flame safety requirements for commercial and residential deployments.
- Plug-and-play USB connectivity reduces setup time on Windows-based Geovision NVR/DVR systems.
$600.00 $355.99 Save $244.01The item has been added
Accessory Kits
Accessory kits provide bundled hardware and installation components designed to streamline surveillance and access control deployments. Pre-configured kits help reduce sourcing time, improve installation consistency, and support repeatable commercial project standards.
Plan Your Deployment
- Device compatibility and project scope alignment
- Standardization across multi-site deployments
- Mounting and fastening requirements
- Environmental durability considerations
- Future service and replacement planning
Accessory Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 4 working models of accessory kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| IP Rating | IP66 |
| Type | Camera, Dome, Accessory |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.