Pelco IMD1-IR 850nm IR Ring Illuminator for Sarix
Overview
The IMD1-IR is a dedicated infrared ring illuminator accessory designed to integrate directly with Pelco Sarix Multi-Imager camera systems. This 850nm accessory mounts around the camera module to deliver uniform, precisely-aligned infrared output without separate mounting brackets or positioning hardware. For integrators deploying Pelco IP cameras in low-light or nighttime surveillance, the IMD1-IR extends effective night-vision range and fills illumination gaps that built-in LED arrays cannot cover alone—particularly valuable in perimeter monitoring, warehouse automation, and critical infrastructure sites where 24/7 coverage is mandatory.
Key Features
- 850nm Infrared Wavelength: Optimizes night-vision clarity while remaining less visible to the human eye than longer-wavelength IR (e.g., 940nm). This matters in covert monitoring scenarios where you want illumination without obvious glow—especially in retail loss-prevention or executive protection deployments.
- Ring Illuminator Form Factor: Mounts directly around the camera module, ensuring infrared output aligns precisely with the camera's field of view. No separate bracket adjustments needed; reduces integration labor and eliminates FOV misalignment issues that plague external spot illuminators.
- Direct Sarix Multi-Imager Integration: Purpose-built for Pelco's Sarix housing interface—plugs into the modular accessory mounting system without adapters or rewiring.
- PoE++ Power Delivery: Draws power via IEEE 802.3bt PoE++ (95.56W per port max available), supplied over standard Ethernet cabling. Eliminates separate power infrastructure; simplifies field deployment and reduces panel clutter in smaller installations.
- ONVIF Compatibility: Integrates into standardized network video management system (NMS) workflows. If you're running VMS architecture built on ONVIF Profile S, T, or G, the IMD1-IR plays nicely without custom drivers or proprietary integration modules.
- IK10 Vandal Rating: Withstands direct impact and environmental stress—critical for outdoor or high-traffic industrial sites where fixtures encounter vibration, collision, or deliberate tampering. Matches durability requirements for warehouse automation and perimeter fence-line deployments.
- NDAA Section 889 and TAA Compliance: Pre-certified for U.S. government, defense contractor, and critical infrastructure procurement. Eliminates costly compliance review cycles if your integrator must meet federal supply-chain requirements.
- HTTPS Data Encryption: Protects IR control and status signaling in compliance with enterprise security standards; required in regulated industries (financial, healthcare, government).
- 5-Year Warranty: Backed by Pelco global support—reduces long-term replacement risk on large multi-site deployments.
Integration & Compatibility
The IMD1-IR connects to Sarix Multi-Imager camera systems via the integrated accessory mounting interface. Power and control flow through a single Ethernet connection to the host camera, which forwards ONVIF commands to the illuminator. Field configuration occurs via the camera's management interface or a compatible NVR with ONVIF support. No separate PoE injector or USB adapter is required—the camera's PoE++ port supplies all power. If your installation involves multiple illuminators across a campus or warehouse, centralized control via ONVIF reduces manual adjustment overhead and supports automated day/night scheduling.
When to Choose This Accessory
Deploy the IMD1-IR when Sarix Multi-Imager built-in IR is insufficient for your coverage area, or when you need replacement of a worn illuminator module. It's particularly effective in loading docks, perimeter fences, and outdoor storage yards where ambient light is minimal and supplemental illumination is the difference between forensic-quality night footage and unusable dark video. If your site uses outdoor IP cameras from other vendors, this accessory only works with Sarix systems—verify camera model compatibility before ordering.
When to Consider an Alternative
If you require 940nm IR (preferred where 850nm glow is a concern) or need a standalone illuminator that mounts separately from the camera, consult Pelco's broader infrared accessory line or evaluate third-party ring lights certified for ONVIF. For indoor or well-lit environments, built-in camera IR typically suffices—avoid over-specifying illumination and inflating project cost.
Frequently Asked Questions
Q: Is the IMD1-IR compatible with all Sarix Multi-Imager models?
A: The IMD1-IR is designed for Sarix Multi-Imager systems with the integrated accessory mounting interface. Verify your specific Sarix model supports the IMD1 ring illuminator form factor before procurement.
Q: What is the effective infrared range of the IMD1-IR?
A: Effective range depends on scene reflectivity, target contrast, and camera sensor sensitivity. The 850nm wavelength typically delivers visible illumination to 20–40 meters in low-reflectivity outdoor environments; consult your camera's minimum illumination specification for precise predictions.
Q: Can the IMD1-IR be powered independently, or must it run through the Sarix camera?
A: The IMD1-IR is powered and controlled via the Sarix host camera's PoE++ connection. It cannot operate as a standalone illuminator.
Q: Does the IMD1-IR meet U.S. federal procurement requirements?
A: Yes, the IMD1-IR is NDAA Section 889 and TAA compliant, supporting government and critical infrastructure projects without additional compliance review.
Q: What is the warranty coverage on the IMD1-IR?
A: The IMD1-IR is backed by a 5-year manufacturer warranty through Pelco global support.
Q: Is ONVIF profile support required for the IMD1-IR to function?
A: ONVIF support enables standardized remote control and scheduling of the illuminator. The device will operate via the Sarix camera's proprietary management interface even without ONVIF, though integration with third-party VMS systems requires ONVIF compatibility.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The IMD1-IR brings a specific advantage that often gets overlooked in low-light deployments: the 850nm wavelength. It's less visible to the human eye than 940nm alternatives, which matters in covert monitoring or sites where obvious IR glow triggers evasion behavior. The ring mount design around the Sarix Multi-Imager eliminates the field-alignment issues you get with bolt-on external illuminators—no more IR hotspots offset from the camera's actual FOV. Real integrators know that's worth the cost of the purpose-built accessory.
Technical Highlights:
- 850nm Wavelength: Balances illumination range against human-eye visibility. Outperforms longer wavelengths in scenarios where you want illumination without broadcasting your surveillance setup. Especially valuable in perimeter monitoring or loss-prevention roles.
- PoE++ Power via Single Ethernet: Draws from the Sarix camera's host connection—no separate power supply or additional infrastructure. On a 24-port PoE++ switch (95.56W max per port), you can support multiple Sarix + IMD1-IR pairs without overloading your power budget.
- IK10 Vandal Rating: Survives vibration from loading-dock equipment, fence-line impact, and deliberate tampering. Reduces replacement cycles in high-traffic warehouse or perimeter applications.
- NDAA / TAA Pre-Certification: Government and critical infrastructure buyers skip the compliance review—huge time savings in federal projects where Pelco's pre-certification carries institutional weight.
Deployment Considerations:
- Sarix-Only Integration: This is not a universal illuminator. It works exclusively with Sarix Multi-Imager systems. Field compatibility checks before order prevent costly rework.
- Power Dependency: The illuminator pulls all power and control through the host Sarix camera. If the camera is powered down or rebooted, IR goes dark. Plan for UPS-backed PoE if your facility requires failover resilience.
- Range Assumptions: 850nm effective illumination is typically 20–40m in outdoor, low-reflectivity scenes. Close-range targets (under 10m) get excellent return; far-range perimeter (50m+) may see diminishing returns unless the target is highly reflective. Test in your actual environment before full deployment.
Position the IMD1-IR in warehouse automation sites, perimeter fence lines, and low-light outdoor storage where Sarix built-in IR alone is insufficient and you need standardized ONVIF control across your installed base. It's not a retrofit for non-Sarix cameras, and it's not a substitute for active scene lighting in forensic-critical environments—but for mid-range covert night-vision extension, the ring design and 850nm spec deliver real value without field alignment headaches.
