Wiremold RP7CTCBS Ratchet-Pro Floor Box Cover Kit

Overview

The RP7CTCBS is a Ratchet-Pro multiple service floor box cover kit from Middle Atlantic, built for conference rooms, boardrooms, and training spaces where power and AV connectivity need to come up through the floor rather than run along a wall. It ships in a brass and black finish combination and includes a prewired 20A duplex receptacle, so the electrical side of the floor box is ready to terminate rather than assembled from loose parts on site. At 3.00 lbs, it is a compact hardware kit, not a full enclosure system — plan on it completing an existing Ratchet-Pro floor box run rather than serving as a standalone unit.

Key Features

• Prewired 20A Duplex Receptacle: The power module arrives factory-wired, so the electrician terminates conductors instead of hand-building a duplex assembly in the field — this cuts labor time on every floor box install and reduces the chance of a wiring error on a commercial job where inspections matter.
• Brass / Black Finish: A brass cover plate paired with black detailing is intended for finished commercial interiors — boardrooms, lobbies, and executive conference spaces — where a floor box needs to look intentional rather than utilitarian when the lid is closed.
• 1 Data/Power + 2 Communication Bay Configuration: The "1DP 2COMM" layout (one data/power position, two communication positions) gives you a mixed-service floor box that can carry a power circuit alongside low-voltage AV or network runs in the same footprint — useful when a table needs both an outlet and a jack cluster without cutting two separate floor openings.
• 2-Year Warranty: A 2-year manufacturer warranty backs the kit, which matters on floor hardware that takes foot traffic and periodic cover cycling over the life of a room.
• TAA Compliant: The RP7CTCBS meets Trade Agreements Act sourcing requirements, which matters directly for integrators bidding government, education, or other federally funded projects where TAA compliance is a bid requirement, not a nice-to-have.
• Compact 3 lb Kit Weight: Light enough that freight and handling costs stay low on multi-room commercial buildouts where you're ordering several units at once.

Integration & Compatibility

The RP7CTCBS is a Ratchet-Pro system component — it's built to complete a Ratchet-Pro floor box rather than function as a universal retrofit cover. Confirm your existing floor box body is part of the same Ratchet-Pro line before ordering, since cover kits in this family are matched to specific box configurations. For rooms being built out from scratch, pair it with the appropriate floor box enclosure and any cable management accessories from the same Middle Atlantic catalog. If you're speccing a full room — table power, AV connectivity, and rack-mounted switching or DSP gear feeding the same table — it's worth reviewing a PoE and power planning guide before finalizing the floor box layout, since power and data pathways often get designed together. This kit falls under other AV equipment rather than a camera or networking category, and is commonly specified alongside mounting solutions for the same conference room build.

What's in the Box

The RP7CTCBS ships as a cover kit with the prewired 20A duplex receptacle installed; the brass/black cover assembly is included as the primary component of the kit.

Frequently Asked Questions

Q: Does the RP7CTCBS come with the receptacle already wired?

A: Yes — it includes a prewired 20A duplex receptacle, so the electrical connection point is ready for termination rather than field assembly.

Q: What finish does the RP7CTCBS come in?

A: Brass and black, intended for finished commercial interiors where the floor box cover is visible.

Q: What's the warranty on the RP7CTCBS?

A: A 2-year manufacturer warranty.

Q: Is the RP7CTCBS TAA compliant?

A: Yes, it is TAA compliant, which matters for government and federally funded procurement.

Q: How much does the RP7CTCBS weigh?

A: 3.00 lbs.

Q: Will the RP7CTCBS fit any floor box, or only Middle Atlantic's own boxes?

A: It's a Ratchet-Pro cover kit designed to complete a matching Ratchet-Pro floor box body from the same product line.

Ted Perry

The RP7CTCBS is a floor box detail I get asked about on conference room retrofits — the prewired 20A duplex receptacle is the part that actually saves a service call, since your electrician isn't hand-terminating a receptacle assembly inside a floor pocket.

Technical Highlights:

• Prewired 20A Duplex Receptacle: Factory-terminated power module means less field assembly time and fewer wiring errors on inspected commercial jobs.
• 1DP 2COMM Configuration: One data/power bay plus two communication bays lets a single floor opening carry both an outlet and a pair of low-voltage runs.
• 3.00 lb Kit Weight: Light enough to keep shipping costs down when a job calls for covers across several rooms.

Deployment Considerations:

• Confirm the existing floor box body is the matching Ratchet-Pro configuration before ordering — this is a cover kit, not a standalone enclosure.
• The brass/black finish is a visible, finished-space look — order the matching Ratchet-Pro box early since floor boxes are typically set during rough-in, well before the cover kit gets installed.

I'd spec the RP7CTCBS for a boardroom or training-room table retrofit where the room already has (or is getting) a Ratchet-Pro floor box and the design calls for a finished brass cover with power ready to go on day one.