Middle Atlantic RP7CTCAB Brass Floor Box Cover Kit with Prewired 20A Duplex Receptacle

Overview

The Middle Atlantic RP7CTCAB is a brass multiple-service floor box cover kit built for conference rooms, boardrooms, and integrated AV spaces where power and signal need to terminate flush with the floor. RP7CTCAB combines a prewired 20A duplex receptacle with modular adapter support in one cover assembly, so you're not stacking separate plates and gang boxes to get power and AV connectivity into the same floor location.

Key Features

• Prewired 20A Duplex Receptacle: arrives ready to terminate, cutting field wiring time versus a bare cover plate that needs a separate receptacle sourced and wired on site.
• Standard or Isolated Ground configuration: lets you match the circuit to the load — isolated ground is the right call when AV or data equipment on the same run is sensitive to electrical noise from other building circuits.
• Brass construction: holds up to foot traffic and rolling equipment carts in commercial floor installations better than a stamped-metal or plastic cover.
• Modular adapter compatibility (unloaded): the cover accepts common open-system adapters, so you configure the exact mix of power and AV connectivity the room needs instead of being locked into a fixed layout.
• Flange and slide holder assembly included: supports proper seating and finish-flush installation in the floor box.

Integration & Compatibility

Because the adapter plate ships unloaded, RP7CTCAB pairs with modular AV and data adapters selected separately to match the room's actual signal requirements — a more flexible approach than a fixed-configuration cover when room use cases change over time. For rooms that also need rack-mounted AV gear feeding these floor connections, review AV over IP options and a mounting solutions line for the equipment side of the run. If you're planning a full room build, a power and cabling planning guide is worth a read before finalizing floor box placement.

Frequently Asked Questions

Q: What receptacle does the RP7CTCAB include?

A: A prewired 20A duplex receptacle, configurable as standard or isolated ground.

Q: Does the RP7CTCAB come with AV adapters installed?

A: No — the modular adapter plate ships unloaded so you can select adapters to match your room's connectivity needs.

Q: What's the warranty on the RP7CTCAB?

A: 2 years.

Q: What material is the RP7CTCAB cover made from?

A: Brass.

Jerry Tildsen

The detail on RP7CTCAB that matters most to me is the isolated ground option on the prewired 20A duplex — that's not a throwaway spec on a floor box serving AV gear.

Technical Highlights:

• Prewired 20A Duplex: shows up ready to terminate, so the electrician isn't sourcing and wiring a separate receptacle into the box on site.
• Standard or Isolated Ground: gives you the option to isolate sensitive AV or data circuits from electrical noise on shared building runs — pick isolated ground if anything on that floor connection is noise-sensitive.
• Brass Cover Construction: stands up to rolling AV carts and foot traffic in a boardroom floor location better than a lighter-gauge stamped cover.

Deployment Considerations:

• The modular adapter plate ships unloaded — budget for the specific AV/data adapters your room needs as a separate line item, they're not bundled in this kit.
• At 1 lb, this is a cover kit, not a full floor box enclosure — confirm the box body itself is already in place or specified separately before ordering.

Specify RP7CTCAB where a boardroom or training room floor connection needs power and AV termination in one flush brass cover, with the flexibility to load whatever adapter mix that specific room calls for.