Door Hardware & I/O
Sub categories
Showing Results for Door Hardware & I/O
-
Camden
SKU: CM-1000/50
Camden CM-1000/50 Cylinder Lock Ring
TCP/IP cylinder lock ring for networked access control up to 50 users
- 30VDC operation integrates with TCP/IP-based systems for centralized management
- Supports 50 concurrent users across distributed authentication architectures
- Cylinder lock ring design compatible with standard door control modules
$5.00 $3.99 Save $1.01The item has been added -
Camden
SKU: CM-1005
Camden CM-1005 Surface Mount Key Switch SPST Momentary
Surface-mount key switch for HID access control at 30VDC
- SPST momentary switch with normally closed contact for door strikes
- 30VDC operation integrates directly into HID-based systems
- Wall-mounted design suits retrofit installations in commercial security
$144.00 $88.99 Save $55.01The item has been added -
Camden
SKU: CM-1010
Camden CM-1010 Surface Mount Key Switch SPST Maintained
- Maintained SPST contact holds electric strikes and mag locks without manual reset.
- 30VDC rating directly drives strike coils and relay loads—no stepping relay needed.
- Surface-mount die-cast aluminum housing installs on existing frames without cutouts.
$144.00 $88.99 Save $55.01The item has been added -
Camden
SKU: CM-1050
Camden CM-1050 Surface Mount Key Switch SPDT Momentary
- Dual SPDT momentary contacts rated 30VDC reset to neutral on key release—no latch logic needed.
- Die-cast 1/4-inch aluminum body with rubber gasket supports indoor and outdoor surface mounting.
- Accepts standard 1–1¼-inch mortise cylinders, fitting common commercial keying systems.
$209.00 $127.99 Save $81.01The item has been added -
Camden
SKU: CM-1080
Camden CM-1080 Surface Mount Key Switch DPDT Momentary
- DPDT momentary contacts let you drive two independent circuits—strike plus shunt—from one key turn.
- 30VDC rating integrates directly with standard access control power supplies; no voltage conversion needed.
- Accepts 1", 1-1/8", or 1-1/4" mortise cylinders in a die-cast aluminum surface-mount housing.
$173.00 $105.99 Save $67.01The item has been added -
Camden
SKU: CM-1082
Camden CM-1082 Surface Mount Key Switch DPDT Momentary
- Dual DPDT momentary contacts rated 30VDC enable direct strike or EM lock control.
- Accepts any standard 1"–1¼" mortise cylinder, including master-key and restricted keyways.
- ¼" die-cast aluminum housing with rubber gasket supports indoor and outdoor surface mount.
$232.00 $141.99 Save $90.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-1100
Camden CM-1100 Key Switch SPST Momentary N/O
- Momentary N/O dry contact closes only while key is turned, eliminating relay coil draw.
- 30VDC rated contact integrates directly with low-voltage strike and mag-lock circuits.
- 1/4-inch die-cast aluminum housing accepts 1", 1-1/8", or 1-1/4" mortise cylinders.
In stock · Ships same business day$115.00 $69.99 Save $45.01The item has been added -
Camden
SKU: CM-1105
Camden CM-1105 Key Switch SPST Momentary N/C
- SPST momentary N/C contact closes only while key is held, supporting fail-safe door circuits.
- Rated 30V DC, integrates directly with standard low-voltage strike and access control relays.
- Die-cast aluminum housing with tamperproof screws resists vandalism in high-traffic installations.
$115.00 $69.99 Save $45.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-1110
Camden CM-1110 Key Switch SPST Maintained
- SPST maintained contact holds signal until key-off, giving operators explicit override control.
- Rated 30VDC for direct compatibility with strike circuits and electromagnetic lock power supplies.
- Die-cast aluminum housing mounts flush into 1"–1¼" mortise openings with no network dependency.
In stock · Ships same business day$115.00 $70.99 Save $44.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-1130
Camden CM-1130 Key Switch SPDT Maintained Contact
SPDT key switch with maintained contacts for 30VDC strike control
- Dual NO/NC contacts stay actuated until manually reset—no relay logic needed
- 30VDC operation integrates directly with standard access control panels
- TCP/IP network support connects to HID reader systems without gateway device
In stock · Ships same business day$131.00 $80.99 Save $50.01The item has been added -
Camden
SKU: CM-1150
Camden CM-1150 Key Switch 2 SPDT Momentary
Dual-contact key switch for HID access control and electric strike activation
- Two SPDT momentary contacts trigger door locks at 30VDC
- Integrates with HID-based access control systems and strike panels
- Momentary pulse activation for credential verification workflows
$180.00 $110.99 Save $69.01The item has been added -
Camden
SKU: CM-1160
Camden CM-1160 Key Switch 2 SPDT Maintained
- Two independent SPDT maintained contacts hold 30VDC state without relay logic.
- Die-cast aluminum housing resists vandal and tamper attempts in high-traffic installs.
- Fits 1", 1-1/8", or 1-1/4" mortise cylinders for drop-in retrofit on legacy hardware.
$180.00 $110.99 Save $69.01The item has been added -
Camden
SKU: CM-1180
Camden CM-1180 Key Switch DPDT Momentary
- DPDT momentary contacts switch two independent circuits simultaneously at 30VDC.
- Die-cast quarter-inch aluminum body withstands prying and weathering on commercial doors.
- Accepts 1", 1-1/8", or 1-1/4" mortise cylinders for straightforward retrofit installs.
$151.00 $92.99 Save $58.01The item has been added -
Camden
SKU: CM-1182
Camden CM-1182 Key Switch DPDT Momentary
- DPDT configuration controls two independent circuits from a single key activation.
- Momentary spring-return contact prevents sustained power draw on strikes or mag-locks.
- Die-cast aluminum housing withstands outdoor and high-humidity environments like loading docks.
$208.00 $127.99 Save $80.01The item has been added -
Camden
SKU: CM-1190
Camden CM-1190 DPDT Maintained Key Switch
- DPDT maintained contacts hold switching state until key withdrawal, eliminating bounce-related unlock errors.
- 30VDC rated contacts drive electric strikes, mag-locks, or solenoids directly without external relay stages.
- Die-cast aluminum housing with tamperproof hardware supports outdoor and industrial surface mounting.
$151.00 $92.99 Save $58.01The item has been added -
Camden
SKU: CM-1192
Camden CM-1192 Key Switch DPDT Maintained
- DPDT design switches two fully isolated circuits simultaneously from a single key.
- Maintained contacts hold state after rotation — no electronic pulse or spring return.
- Rated 30VDC; compatible with 12VDC and 24VDC EM lock and electric strike circuits.
$208.00 $127.99 Save $80.01The item has been added
Door Hardware & I/O
Door hardware and I/O components connect physical doors to your access control system. From electric strikes and magnetic locks to exit devices and relay modules, proper hardware selection ensures safe, compliant, and reliable operation.
Plan Your Deployment
- Fail-safe vs fail-secure lock configuration
- Door type (wood, metal, glass, storefront)
- Request-to-exit (REX) device requirements
- Power supply and voltage compatibility
- Local life-safety and fire code compliance
Door Hardware & I/O — Engineering-Grade Door Hardware for Commercial Deployments
This category covers 532 working models of door hardware & i/o sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Fail-safe versus fail-secure determines what happens during power loss. Fail-safe locks unlock on power loss (used on egress doors where life safety dominates); fail-secure locks remain locked (used on storage, server rooms, and exterior doors where security dominates). Code typically mandates fail-safe on stairwell and egress doors. Confirm with the AHJ before specifying — misapplied lock mode is a common code violation.
Strike, mortise, magnetic lock, and electrified panic hardware each have distinct installation, current draw, and code implications. Electric strikes work with most mechanical locksets and are easiest to retrofit. Magnetic locks (maglocks) provide high holding force on glass and wood doors but require dedicated REX and panic-bar interfaces for egress compliance. Verify the door's existing prep before choosing.
Power draw and inrush current dictate power supply sizing. A 5-door system with 1A peak per lock can exceed an undersized 12VDC supply at simultaneous lock-down events. Account for accessories — REX motion sensors, door-position switches, electrified levers — when sizing the supply and the battery backup required for code compliance.
Tamper switches, door-position monitoring, and request-to-exit sensors generate the audit trail your security team needs. Mechanical contact switches are cheaper; magnetic reed switches resist tampering better. Pair each door with a position switch and a REX sensor at minimum — without door-position monitoring, you can't distinguish 'authorized entry' from 'door held open after authorized entry,' which is a common compliance gap.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 8MP, 2MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired |
| Power | AC/DC, Battery |
| Type | Accessory, Controller, Cable, Switch, Power Supply, Access Card, Contact, Lock/Strike |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Fail-safe or fail-secure for stairwell doors?
Fail-safe is mandatory on most stairwell doors and other code-designated egress paths — the lock must release on fire alarm or power loss to allow evacuation. Fail-secure on those doors is a code violation. Confirm the local fire code and AHJ requirements; commercial buildings in the U.S. follow NFPA 101 and the International Building Code, both of which detail egress lock behavior in detail.
What current draw should I plan for electrified locks?
Typical 12VDC electric strikes draw 200-500 mA continuous, with inrush spikes of 1-2A at engagement. Magnetic locks rated for 1,200 lbs holding force draw around 500 mA continuous at 24VDC. Power supplies need to handle simultaneous lock-down current — emergency lockdown events activate all locks at once. Size the supply with at least 25% headroom and confirm battery backup runtime requirements.
Do I need a request-to-exit (REX) sensor?
Most code-compliant electrified door installations require a REX sensor to shunt the alarm during authorized egress. Without REX, every egress event registers as a forced-door alarm. PIR motion sensors are the common choice and integrate with the door controller's REX input. Mechanical push-bar REX is also acceptable for hardware that includes that switch natively.
Can I use one lock for both card and mechanical key entry?
Yes — most electrified strikes and locks allow mechanical key override on the same door. Maintaining a master key for emergency mechanical access is required by code in many jurisdictions and recommended in all. Document the master key holders carefully; an uncontrolled master key program undermines the electronic audit trail.
What's the lifespan of a magnetic lock?
Quality maglocks (Securitron M62, HES, von Duprin) typically last 15-20 years with no mechanical wear. Failure points are the connector, the armature plate-to-lock alignment, and contamination of the magnetic face. Plan for armature replacement at year 10 as a hedge against alignment drift. Strike-type locks with mechanical parts last 5-10 years before strike-plate wear becomes a reliability issue.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.