Speco Technologies · N16NRX24TB

Speco Technologies N16NRX24TB 16 Channel Facial Recognition Recor

16-channel NVR with 24TB storage and embedded facial recognition for mid-scale deployments

• Facial detection and watch-list matching across all 16 IP camera streams in real time
• 24TB integrated storage supports extended retention for forensic review and compliance
• Object detection and behavioral monitoring with customizable alerts on ONVIF cameras

Speco Technologies · N16NRX2TB

Speco Technologies N16NRX2TB 16 Channel Facial Recognition Record

16-channel NVR with 2TB storage and built-in facial recognition

• Records 16 IP cameras simultaneously with integrated facial recognition for real-time identification
• 2TB onboard storage eliminates need for external NAS; ONVIF-compliant for any camera brand
• Motion detection and analytics-driven recording modes reduce storage use and investigation time

Speco Technologies · N16NRX32TB

Speco Technologies N16NRX32TB 16 Channel Facial Recognition Recor

16-channel NVR with 32TB storage and on-board facial recognition

• Real-time facial recognition engine identifies and catalogs faces across all 16 channels simultaneously
• 32TB integrated hard drive supports extended retention for continuous recording without external storage
• Object detection and behavior analysis process video locally with event-driven alerts

Speco Technologies · N8NRE4TB

Speco Technologies N8NRE4TB 8-Channel Facial Recognition Recorder

8-channel NVR with on-premise facial recognition and 4TB storage

• Real-time facial detection and matching without external GPU or cloud
• 8-channel simultaneous recording with H.265/H.264 codec flexibility
• Object detection and behavior monitoring with configurable event alerts

Speco Technologies · N8NRX16TB

Speco Technologies N8NRX16TB 8 Channel Facial Recognition Recorde

8-channel NVR with onboard facial recognition and 16TB storage

• Facial detection, extraction & recognition built into recorder—no external server needed
• 8 concurrent IP camera streams with 16TB integrated drive for extended retention
• Multi-object detection & behavioral analytics on ONVIF-compliant camera feeds

Speco Technologies · SGACL

Speco Technologies SGACL Access Control Integration SecureGuard

• Powers over 802.3af PoE — no separate power supply needed, draws under 13W.
• Bridges legacy access control hardware into an IP-based VMS without hardware replacement.
• Built-in microphone support enables pairing with audio-capable IP camera workflows.

STI · EP060605-O

STI EP060605-O EnviroArmour Polycarbonate Access Controller

TCP/IP controller for 7-door systems in polycarbonate enclosure

• Manages 7 doors over TCP/IP network with injection-molded polycarbonate housing
• Operates at 44dB(A) for quiet installation in occupied access control spaces
• UL/cUL certified (EP242410-O) with RAL 7035 gray finish for outdoor durability

STI · EP141207-O

STI EP141207-O EnviroArmour Polycarbonate Door Controller

• Manages up to 7 door/reader zones over TCP/IP for scalable networked access control.
• Injection-molded polycarbonate resists corrosion in humid, outdoor, or high-moisture zones.
• 44 dB(A) audible alarm output suits retail and office spaces without excessive noise.

STI · GLR401EM-EN

STI GLR401EM-EN Global ReSet Push Button Credential

• Operates on a 42VDC signal input, enabling direct hardwired integration with compatible access control panels.
• UL-listed to UL2017 Type SM, UL294, and UL365, satisfying commercial life safety and access control code requirements.
• Flush-mounts to single gang, double gang, four square, or 60.3mm European boxes using included hardware.

STI · GLR401NT-EN

STI GLR401NT-EN Global ReSet Push Button Credential

• UL-listed under UL2017 Type SM, UL294, and UL365 for compliant access control deployments.
• Operates at 42VDC, fitting standard low-voltage access control power infrastructures.
• Flush-mount double gang box installation with included #6-32 x 1.0" machine screws simplifies rough-in.

STI · KIT-06297D

STI KIT-06297D Electric Strike Spacer Kit for STI-1210D/1221D

• Corrects frame-depth misalignment for STI-1210D and STI-1221D electric strikes.
• Operates at 9V DC, integrating directly with the strike's existing power circuit.
• Frame-specific design prevents latch engagement gaps on wood, metal, or composite frames.

STI · KIT-09

STI KIT-09 Replacement Glass for Electric Strike

• Direct replacement glass restores STI 6100 electric strike function without full unit swap.
• Rated 9V DC for drop-in compatibility with standard low-voltage access control power supplies.
• Targeted spare part minimizes downtime during maintenance on existing strike installations.

STI · KIT-405440

STI KIT-405440 Gasket for STI-6514 Electric Strike

Replacement gasket assembly for STI-6514 electric strike units

• Designed for STI-6514 9VDC electric strike with HID credential reader
• Restores door frame seal integrity and strike operational performance
• Wall-mounted gasket/seal component for access control installations

STI · KIT-901

STI KIT-901 Clear 2" Spacer for STI-9105 Electric Strike

2" clear spacer for STI-9105 electric strike door frame alignment

• 2-inch acrylic/polycarbonate thickness corrects frame mounting variations
• Installs between strike and frame for proper 9VDC electromagnetic engagement
• Compatible with STI-9105 electric strike systems in access control setups

STI · KIT-G101598

STI KIT-G101598 Gasket for Electric Strike

• Direct replacement gasket restores seal integrity on STI-6518 electric strike assemblies.
• Rated for 9VDC systems, ensuring electrical compatibility with existing power supplies.
• Supports HID credential reader installations, maintaining access control continuity.

STI · KIT-G82599

STI KIT-G82599 Gasket for STI-6516 Electric Strike

• Restores weatherproofing on the STI-6516 electric strike, blocking moisture and dust intrusion.
• Designed specifically for the STI-6516 9VDC strike — geometry ensures proper seating and full seal.
• No special tools required; installs between strike body and cover plate using standard fasteners.

STI · KIT-M02002

STI KIT-M02002 Clear Frame for Stopper II Electric Strike

• Clear polycarbonate construction allows strike status inspection without removing cover.
• Mounts directly over Stopper II assembly using four fixing points drilled into masonry.
• Draws no independent power; operates at 9V DC through existing access control circuit.

STI · KIT-E18151

STI N.C. Reed Switch and Magnet for STI-SA5000 - KIT-E18151

• Replacement N.C. reed switch restores door-state detection on STI-SA5000 locks.
• Operates at 9VDC and integrates directly with HID reader-based access control panels.
• Kit includes both switch and magnet; maintain alignment within 0.25 in. for reliability.

STI · NT-CA100-EN

STI NoTouch® Cast Aluminum Switch with Three - NT-CA100-EN

• Infrared hand-wave trigger (1.5–6 in.) eliminates mechanical wear in high-traffic entries.
• Form C relay (0.5A@120VAC / 1A@24VDC) integrates directly with EM locks and strike panels.
• Three included snap-in lenses enable zone labeling without hardware swaps on retrofit installs.

STI · NT-SS000-EN

STI NoTouch® Stainless Steel Switch Slim/Mullion - NT-SS000-EN

• Infrared detection (4–15 cm range) enables hands-free door release with zero contact.
• Form C relay (1A @ 24VDC) drives electric strikes, maglocks, or gate operators directly.
• IP65-rated 304 SS faceplate survives institutional wash-downs; latch adjustable 0.5–20 sec.

STI · NT-SS001-EN

STI NoTouch® Stainless Steel Switch Slim/Mullion - NT-SS001-EN

• IP65-rated 304 stainless steel housing withstands splash and heavy-use environments.
• Form C dry contact relay integrates with any 12VDC/24VDC strike, mag-lock, or access panel.
• Adjustable 0.5–20 sec relay latch and 1.5–6 in. detection range simplify site-specific tuning.

STI · NT-SS002-EN

STI NoTouch® Stainless Steel Switch Slim/Mullion - NT-SS002-EN

• Form C dry contact (0.5A @ 120VAC / 1A @ 24VDC) ties directly into existing lock circuits.
• IP65-rated 304 stainless housing supports mullion retrofit without frame modification.
• Adjustable 0.5–20 s relay latch delay matches door-closer timing; IR range 1.5–6 inches.

STI · NT-SS002-FR

STI NoTouch® Stainless Steel Switch Slim/Mullion - NT-SS002-FR

• Infrared NoTouch activation eliminates contact, reducing cross-contamination in high-traffic areas.
• 12VDC operation integrates directly with existing strikes, maglocks, and access control panels.
• Slim mullion form factor with integrated back box retrofits standard door frames with minimal modification.

STI · NT-SS200-EN

STI NoTouch® Stainless Steel Switch, US Double-Gang, Door Symbol

Contactless stainless steel switch for access control and automatic doors

• NoTouch® infrared activation eliminates hand contact in high-traffic areas
• Stainless steel construction resists corrosion for indoor and semi-outdoor use
• 12VDC operation compatible with standard access control and door systems

STI · NT-SS100-EN

STI NoTouch® Stainless Steel Switch, US Single-Gang, Door Symbol

Hands-free stainless steel switch with door symbol for access control

• Contactless NoTouch® activation reduces surface contact in high-traffic areas
• 12VDC operation with IP65 rating for healthcare and secure entry points
• Stainless steel construction resists corrosion in demanding environments

STI · NT-SS101-EN

STI NT-SS101-EN NoTouch Stainless Steel Switch Single-Gang EXIT

Contactless stainless steel exit switch, 12VDC, IP65 rated

• NoTouch activation eliminates physical contact for high-traffic areas
• Stainless steel construction with IP65 rating for durability
• Single-gang US form factor integrates with standard access control systems

STI · NT-SS101-FR

STI NT-SS101-FR NoTouch Stainless Steel Switch Single-Gang EXIT

Stainless steel contactless EXIT switch for touchless access control

• 12VDC single-gang switch eliminates hand contact in high-traffic areas
• IP65-rated stainless steel construction resists moisture and hygiene risks
• IR motion sensing activates EXIT function without physical touch points

STI · NT-SS102-EN

STI NT-SS102-EN NoTouch® Stainless Steel Switch US Single-Gang

Hands-free stainless steel switch for access control, no touch required

• Contactless activation eliminates physical contact points in high-traffic areas
• Stainless steel construction rated IP65 for durability in wet environments
• 12VDC operation integrates with standard access control and door strike systems

STI · NT-SS201-EN

STI NT-SS201-EN NoTouch Stainless Steel Switch Double-Gang EXIT

Touchless stainless steel exit switch for hands-free access control

• Infrared sensor activation eliminates contact points in high-traffic areas
• Stainless steel housing resists corrosion in wet and humid environments
• 12VDC relay output with double-gang config fits standard electrical boxes

STI · NT-SS202-EN

STI NT-SS202-EN NoTouch Stainless Steel Switch Double-Gang

• IP65-rated 304 stainless steel faceplate withstands washdowns in healthcare and food-service zones.
• Form C dry contact (0.5A/120VAC, 1A/24VDC) integrates directly with mag locks and relay-driven strikes.
• Dual-gang IR detection at 1.5–6 in controls two independent circuits from one plate on 12VDC/45mA draw.

STI · STI-7533

STI Protective Cabinet - Polycarbonate with Backplate, Siren Alarm,...

NEMA 4X polycarbonate cabinet with integrated siren alarm for outdoor access control

• Impact-resistant polycarbonate withstands harsh outdoor, wet, and coastal environments
• Integrated siren alarm provides audible notification for access events and security alerts
• Lock/strike assembly with wall and pedestal mounting for flexible installation options

STI · STI-7525

STI Protective Cabinet with Siren/Strobe Alarm, Thumb Lock

NEMA 4X protective cabinet with thumb lock and siren/strobe alarm

• Thumb lock access control with integrated siren and strobe alarm system
• NEMA 4X steel construction rated for indoor and outdoor environments
• Wall-mounted design for secure storage of access control equipment

STI · STI-12006

STI STI-12006 Mugger Stopper Plus Electric Strike

• Operates at 9VDC for direct integration with low-voltage access control panels.
• Electric strike enables remote or credential-based door release without high-current draw.
• Suits retrofit and new installations using standard low-voltage wiring and strike circuits.

STI · STI-1250

STI STI-1250 Flush Mount Electric Strike with Fire Label

Fire-labeled flush mount strike, 9VDC, silent operation for access control

• Fits standard door frame cavities with no surface housing required
• 9VDC low-voltage operation simplifies control system integration
• Fire-labeled certification meets life-safety compliance on rated doors

STI · STI-1250NR

STI STI-1250NR Weather Stopper Flush Mount Electric Strike

• Runs on included 9V DC battery—no hardwired power needed for remote deployments.
• Closed-cell gaskets seal against rain and temps from -40°F to 250°F for outdoor use.
• UL-listed flush-mount fits standard frames; works with cards, keypads, and proximity readers.

STI · STI-1331

STI STI-1331 Universal Stopper® Electric Strike

Universal Stopper® electric strike for retrofit and new access control installations

• 9VDC operation integrates with standard access control relay systems and battery backup
• Universal Stopper® design fits multiple door frame types without custom modifications
• Wall-mount configuration supports both retrofit and new installation deployments