HES

SKU: EPT-SC

HES EPT-SC Electrical Power Transfer SwingClear

Power distribution accessory for HES security control systems

• Electrical power transfer and routing for access control installations
• SwingClear cable management design simplifies installation and maintenance
• Compatible with HES security infrastructure for surveillance and access systems

HES

SKU: EPTL

HES EPTL Electrical Power Transfer Module

Centralized power module for multi-zone access control and security systems

• Distributes power to card readers, electronic locks, and door controls across multiple zones
• DIN-rail and enclosure-mount options for indoor/outdoor security cabinets and control panels
• Reduces voltage drop on long reader runs with direct integration to HES security architectures

HES

SKU: EXD-1L

HES EXD-1L Exit Delay System Module

Configurable exit delay relay for HES electromagnetic locks

• Centralizes exit delay logic for up to 92 doors from a single 0.25 lb module.
• Native 24VDC input integrates directly with standard access control panels and lock controllers.
• Wiegand communication lets credential readers trigger delay sequences without protocol conversion.

HES

SKU: FA-200

HES FA-200 D.P.D.T. Indicating Shunt Switch

D.P.D.T. relay switch with visual indicator for access control circuits

• D.P.D.T. configuration switches two independent circuits simultaneously from one trigger.
• Integrated visual indicator confirms relay state instantly—no multimeter needed on-site.
• Compact 2.5 × 2.5 × 0.77 in body fits tight enclosure installs at 0.1 lb.

HES

SKU: FA-200WIRED

HES FA-200WIRED DPDT Indicating Shunt Switch

DPDT indicating shunt switch for manual door strike control with status feedback

• DPDT contacts enable independent or sequenced control of solenoid and mag-lock hardware.
• 28VDC input integrates directly with standard access control power supplies and UPS modules.
• Illuminated alternate-action button confirms switch state instantly, simplifying field troubleshooting.

HES

SKU: FA-XDT-24

HES FA-XDT-24 Exit Delay Timer 24VDC

24VDC exit delay timer for controlled mag-lock and strike release

• Flush-mount design integrates into door frames without surface equipment
• Alarm output monitors delay conditions and integrates with access control
• Compatible with HES electronic locking hardware across standard architectures

HES

SKU: 1006-630

HES Fail Secure Universal 12/24VDC Electric Strike - 1006-630

• Fail-secure operation keeps the door locked during power loss, protecting secured areas.
• Accepts 12V or 24VDC input, fitting existing power architectures without added conversion hardware.
• Universal frame footprint installs on wood or metal frames, reducing retrofit fabrication time.

HES

SKU: FMB9-4

HES FMB9-4 Post Shim Kit for Flex Mount B

Four-piece shim kit for Flex Mount B bracket alignment

• Four-piece shim kit corrects surface irregularities for precise Flex Mount B alignment.
• Eliminates post-installation rework by compensating for tolerance stackup during deployment.
• Compact form factor (1.1 × 8 × 0.2 in, 0.65 lb) minimizes carry load on multi-site jobs.

HES

SKU: FMK-SL

HES FMK-SL Flex Mount Kit for Sliding Gate

Flex mount kit for sliding gates—fits non-standard frames without welding

• Accommodates multiple frame angles and geometries for retrofit installations
• Eliminates on-site custom fabrication and shimming labor on variable frames
• Works with HES electric strike systems for sliding gate access control

HES

SKU: FMK-SW

HES FMK-SW Flex Mount Kit Swing Gate

Flex mount kit for swing gate access control integration

• Accommodates varied gate geometries without custom fabrication
• Compatible with HES access control components and readers
• 13.35 lb electromagnetic lock strike mount, US-made

HES

SKU: FP:H-2-630

HES FP:H-2-630 Satin Stainless Steel Faceplate

Satin stainless steel faceplate for HES 1006 electric strike

• 630 finish satin stainless steel resists corrosion in high-traffic areas
• Direct fit for HES/Hanchett 1006 electric strike installations
• Professional finished appearance suitable for commercial door assemblies

HES

SKU: FP:KD-630

HES FP:KD-630 Faceplate for 1006 Electric Strikes

Satin stainless steel faceplate for HES 1006 electric strikes

• Satin stainless steel construction resists corrosion in commercial indoor deployments.
• Direct-fit compatibility with HES 1006 electric strikes simplifies retrofit and new installs.
• Compact 5 x 1.5 x 0.1 in profile fits standard door prep without modification.

HES

SKU: FP:KM-630

HES FP:KM-630 Faceplate for 1006 Electric Strikes

Satin stainless steel replacement faceplate for HES 1006 electric strikes

• Direct drop-in replacement for HES 1006 electric strikes minimizes downtime.
• Satin stainless steel construction resists corrosion in standard commercial environments.
• Compact 4.8 x 1.8 x 0.2 in profile fits standard 1006 series strike cutouts.

HES

SKU: FP:N-2-630

HES FP:N-2-630 Satin Stainless Steel Faceplate

N-2 satin stainless faceplate for HES 1006 electric strikes

• 630-grade stainless steel with satin finish resists corrosion
• N-2 profile geometry aligns precisely with 1006 strike mechanism
• Direct replacement part for commercial access control installations

HES

SKU: FPK7410-313

HES FPK7410-313 7400 Modular Faceplate Kit

Dark bronze modular faceplate for HES 7400 series access control

• Anodized aluminum construction resists corrosion in high-traffic entries
• Modular design supports multiple mounting configurations and layouts
• Compatible with HES 7400 series for standardized multi-facility deployments

HES

SKU: FPK7410-335

HES FPK7410-335 7400 Modular Faceplate Kit

Black aluminum faceplate for HES 7400 systems with modular reader inserts

• Modular design supports mixed-technology deployments across multiple credential types
• Black anodized aluminum construction resists corrosion in indoor access control environments
• Configurable reader and button inserts simplify upgrades without hardware replacement