Wiremold MAB6TJ-GY Ortronics TracJack Adapter Bezel

The MAB6TJ-GY is an Ortronics TracJack adapter bezel from Middle Atlantic's Wiremold product line, built to carry TracJack modular connectors into a standard mounting opening. It's a small, specific part — the kind of component a rack builder or low-voltage installer needs to have on hand when a jack panel calls for a TracJack insert rather than a keystone. At 2.27 in wide, 3.05 in long, and 0.67 in deep, and weighing 0.041 lb, it's sized to sit flush in standard faceplate and panel cutouts without adding bulk behind the wall or rack rail.

Overview

MAB6TJ-GY belongs to Middle Atlantic's CM Series / TracJack family, manufactured under the Wiremold product line and assembled in the United States. As an adapter bezel, its job is narrow and mechanical: it provides the physical opening and retention structure that lets a TracJack connector mount cleanly into a wall plate, patch panel, or enclosure cutout designed for that format. It carries a ULus Listing (file number E145222), which matters for spec compliance on commercial jobs where inspectors or engineers require listed components in the pathway.

Key Features

• ULus Listed (File E145222): a formal UL listing gives you a verifiable reference number to cite on submittals and closeout documentation — useful when a general contractor or AHJ wants proof the part is recognized for the application rather than a generic import.
• NEC Article 800 / CEC Article 60-308 reference: these are the code articles governing communications circuits (NEC) and communication systems (CEC) that this bezel is designed to be installed under — relevant when you're documenting a low-voltage cabling job against code for inspection.
• TAA compliant: sourcing documentation supports Trade Agreements Act compliance, which matters if you're supplying into a federal, state, or GSA-funded project with TAA sourcing requirements written into the bid.
• Compact footprint (2.27 in x 3.05 in x 0.67 in): the bezel is built to standard TracJack cutout dimensions, so it drops into existing panel and faceplate openings without requiring a non-standard hole pattern.
• Light weight (0.041 lb): at under an ounce, it adds negligible load to a populated patch panel or wall plate — not a factor you need to account for in rack weight budgets even at volume.
• Gray finish (GY): matches standard commercial low-voltage finish conventions, so it blends with typical gray keystone and TracJack ecosystems instead of standing out as a mismatched color in a populated panel.

Integration & Compatibility

MAB6TJ-GY is built specifically for the Ortronics TracJack connector format within Middle Atlantic's Wiremold line — it is not a universal keystone adapter, so confirm your connectors are TracJack-format before ordering. Because it shares the CM Series family designation, it's intended to work alongside other Middle Atlantic CM Series cable management and mounting components used in the same rack or panel build. If you're speccing a full rack elevation, pair this bezel selection with the broader Middle Atlantic catalog for matching rack accessories, and check rack accessories for compatible cable management to route TracJack-terminated runs cleanly into the rack. For low-voltage and structured cabling planning on a larger job, a PoE and cabling planning guide can help sequence jack and panel selection before pathway is closed up. If your build also includes network switching gear, review PoE switches to make sure port count and panel layout line up before termination day. For camera or access-control cable runs terminating into this bezel type, cross-check requirements against a structured cabling basics guide so jack format decisions get made once, correctly, rather than mid-install.

Frequently Asked Questions

Q: Is the MAB6TJ-GY TAA compliant?

A: Yes, the MAB6TJ-GY is listed as TAA compliant, supporting use on federal and GSA-funded procurement where Trade Agreements Act sourcing is required.

Q: Is the MAB6TJ-GY UL listed?

A: Yes, it carries a ULus Listing under file number E145222.

Q: What connector format does the MAB6TJ-GY support?

A: It is an Ortronics TracJack adapter bezel, designed specifically for TracJack-format modular connectors — not generic keystone jacks.

Q: What are the dimensions of the MAB6TJ-GY?

A: It measures 2.27 in wide by 3.05 in long by 0.67 in deep, and weighs 0.041 lb.

Q: Where is the MAB6TJ-GY manufactured?

A: Country of origin is listed as the United States.

Marty Allison

MAB6TJ-GY is one of those parts you don't think about until a panel spec calls for TracJack instead of standard keystone — then it's the difference between a clean termination and a mismatched retrofit. It's a small mechanical adapter, not a smart device, so the evaluation here is fit and compliance, not performance.

Technical Highlights:

• ULus Listing E145222: gives you a citable reference for inspection and closeout paperwork instead of relying on a generic UL mark with no traceable file.
• 2.27 in x 3.05 in x 0.67 in footprint: sized to standard TracJack cutouts, so it drops into existing panel geometry without a custom hole pattern.
• 0.041 lb weight: negligible load contribution even across a fully populated multi-port panel — not something you need to factor into rack or wall-mount weight calculations.

Deployment Considerations:

• Confirm your connectors are Ortronics TracJack format before ordering — this bezel is not a universal keystone adapter and won't accept standard keystone jacks.
• The gray (GY) finish is a specific SKU variant — check panel and wall plate color matching before mixed-lot ordering across a large job.

Reach for the MAB6TJ-GY specifically when you're terminating an Ortronics TracJack run into a Middle Atlantic CM Series rack build or structured cabling panel and need a listed, code-documentable adapter rather than a generic aftermarket bezel.