Extenders & Repeaters
Showing Results for Extenders & Repeaters
-
Transition Networks
SKU: SRS2F3111-100-NA
Transition Networks SRS2F3111-100-NA Managed Media Converter
8-port managed converter bridges copper to fiber with ST connectors
- 8-port managed design lets you consolidate copper-to-fiber conversion at a single point.
- Gigabit throughput sustains bandwidth-intensive surveillance and data traffic across fiber runs.
- ST fiber interface and 100BASE-FX support simplify integration into existing fiber infrastructure.
$362.14 $254.99 Save $107.15The item has been added -
Transition Networks
SKU: SRS2F3114-100-NA
Transition Networks SRS2F3114-100-NA RS232/DB9 to Fiber Media
RS232 to single-mode fiber converter with 8 managed ports and gigabit speed
- Bridges RS-232/DB9 serial devices to single-mode fiber for extended-distance runs.
- 8 managed ports support gigabit throughput for high-density serial device integration.
- SC single-mode fiber connectivity suits campus and wide-area fiber infrastructure deployments.
$638.00 $476.99 Save $161.01The item has been added -
Ubiquiti
SKU: UACC-LRE
Ubiquiti UACC-LRE Long-Range Ethernet Repeater
Ethernet repeater extends PoE networks 1 km with passthrough power
- Extends PoE network segments up to 1 km, eliminating mid-run active equipment.
- Delivers 22.5W passthrough PoE+ to power cameras or APs without a second injector.
- IPX5-rated enclosure handles outdoor installs from -40 to 80°C with ±30kV ESD protection.
$30.99The item has been added -
Ubiquiti
SKU: UACC-RETROFIT-POE-2WIRE
Ubiquiti UACC-RETROFIT-POE-2WIRE PoE Over 2-Wire Retrofit Extender
Extend PoE power across existing 2-wire infrastructure for access control
- Accepts PoE++ input and delivers PoE/PoE+ output across existing 2-wire runs.
- Works with legacy twisted-pair or coaxial cable, eliminating new Ethernet pulls.
- Dual-unit TX/RX design deploys at the PoE source and near the access device.
In stock · Ships same business day$101.99 -
Veracity
SKU: VHW-HWPS-B4-LL
Veracity Highwire Powerstar BASE4 Linklock - VHW-HWPS-B4-LL
- Highwire Powerstar BASE4 Gigabit Linklock connector
- Drop-in module for BASE4 platform expansion
- Gigabit Ethernet over coax for legacy cable reuse
$775.50 $677.99 Save $97.51The item has been added -
Veracity
SKU: VHW-HWPS-B8-LL
Veracity Highwire Powerstar BASE8 Linklock - VHW-HWPS-B8-LL
- Highwire Powerstar BASE8 Linklock connector module
- Gigabit Ethernet over coax for legacy cable reuse
- Drop-in module for BASE8 platform expansion
$1,387.50 $1,210.99 Save $176.51The item has been added -
Veracity
SKU: RMPSU-8W
Veracity RMPSU-8W 24-Port Managed Gigabit Switch
24-port managed gigabit switch for rack and DIN rail security systems
- All 24 ports run full 1000 Mbps for simultaneous high-bandwidth IP camera feeds.
- VLAN, QoS, and port mirroring give integrators precise control over security traffic.
- DIN rail mounting fits electrical enclosures and compact security closets cleanly.
$27.12 $23.99 Save $3.13The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-1U
Veracity VHW-1U Ethernet over Coax Extender
Ethernet over coax extender—300m reach on existing RG-59/RG-6 cable
- Transmits 10/100 Mbps Ethernet up to 300m (1100ft) over existing RG-59/RG-6 coax.
- Zero-configuration transparent bridge—no IP assignment needed for immediate deployment.
- 1U rack-mount form factor fits cable headends and central hub closets with 3-year warranty.
$62.75 $53.99 Save $8.76The item has been added -
Veracity
SKU: VHW-DMB
Veracity VHW-DMB Ethernet over Coax Converter
Ethernet over coax converter for IP cameras on existing cable runs
- Transmits standard Ethernet over existing RG-6/RG-11 coax, eliminating recabling costs.
- DIN rail mountable design fits panel and rack deployments in compact equipment spaces.
- Supports 802.3af PoE, powering IP cameras directly through the coaxial infrastructure.
$29.25 $24.99 Save $4.26The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HW
Veracity VHW-HW Ethernet over Coax Extender
Ethernet over coax extender for retrofit installs—1000 ft range
- Delivers 100Base-TX over existing coax up to 1,100 ft, eliminating new cable pulls.
- Transparent Layer 2 bridge needs no IP config—plug coax and Ethernet in, traffic flows.
- PoE 802.3af pass-through powers edge devices over the same coax run via BNC connector.
$168.00 $143.99 Save $24.01The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-B
Veracity VHW-HWPS-B HIGHWIRE Powerstar PoE Extender
PoE extender for cameras and readers up to 1,000 feet away
- Extends PoE+ (802.3at) and 100Base-TX up to 300m (1,000ft) over coax.
- Delivers up to 5W PoE budget to power cameras, readers, and intercoms remotely.
- Rated -10 to 50°C and supports RG-59/RG-11 coax for existing cable reuse.
$244.00 $202.99 Save $41.01The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-B4
Veracity VHW-HWPS-B4 HIGHWIRE Powerstar Managed PoE Extender
Managed PoE extender with Gigabit speed for remote camera and sensor sites
- Extends PoE 802.3af and Gigabit data up to 300m (1,640ft) over RG-59/RG-11 coax.
- 200 Mbps bandwidth sustains concurrent HD and 4K streams without compression artifacts.
- Managed interface enables remote VLAN, QoS, and power-fault diagnosis without site visits.
$648.62 $524.99 Save $123.63The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-B8
Veracity VHW-HWPS-B8 HIGHWIRE Managed PoE Extender
Managed PoE extender for security cameras beyond switch reach
- Extends PoE 802.3af delivery up to 1,640 ft (500 m) beyond standard switch reach.
- DIN-rail mount and screw terminals simplify installation in control panels and enclosures.
- SNMP management enables remote VLAN tagging, port shutdown, and fault isolation at 25 W PoE budget.
$1,200.88 $1,006.99 Save $193.89The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-C
Veracity VHW-HWPS-C HIGHWIRE Powerstar PoE Extender
PoE extender pushes power 300m beyond standard limits on single cable
- Extends PoE+ power delivery up to 300 m (1,000 ft) on a single cable run.
- Accepts and re-injects 802.3at PoE+, eliminating separate power lines for edge devices.
- Rated –10°C to 50°C, suiting enclosed outdoor and temperature-controlled indoor installs.
$246.00 $202.99 Save $43.01The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-C2
Veracity VHW-HWPS-C2 HIGHWIRE Powerstar PoE Extender
PoE extender reaches 1000ft to power remote security devices
- Extends PoE+ (802.3at) at up to 5W over coax to 1000ft for remote cameras.
- Runs 100Base-TX at 200 Mbps throughput over RG-59 or RG-11 coax cable.
- Operates from -10 to 50°C and weighs 90g for tight enclosure installs.
$407.50 $321.99 Save $85.51The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-C4
Veracity VHW-HWPS-C4 Managed PoE Extender
Managed PoE extender regenerates power & signal to 300m for remote cameras
- Extends PoE+ signal and power up to 300m (1000ft) over RG-59/RG-11 coax.
- Managed Layer 2 with VLAN and port mirroring isolates cameras from office traffic.
- Operates from -10 to 50°C, fitting both indoor cabinets and temperature-controlled enclosures.
$448.75 $355.99 Save $92.76The item has been added
Extenders & Repeaters
Network extenders and repeaters help extend Ethernet and PoE beyond standard distance limitations, supporting reliable connectivity for remote cameras and edge devices. These solutions are commonly used for long runs, distributed sites, and challenging infrastructure layouts.
Plan Your Deployment
- Distance requirements and cabling limitations
- PoE power delivery and total wattage planning
- Bandwidth needs and device throughput requirements
- Installation environment and enclosure considerations
- Reliability planning and service access
Extenders & Repeaters — Engineering-Grade Network Infrastructure for Commercial Deployments
This category covers 171 working models of extenders & repeaters sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Port count and PoE budget come first. An 8-camera install needs at least 9 ports (cameras + uplink), with PoE budget covering the sum of per-camera PoE class. Account for uplink speed: 1 Gbps uplinks bottleneck under heavy video load on switches with 8+ high-resolution cameras. SFP+ or 10 Gbps uplinks remove that bottleneck on growing sites.
Managed versus unmanaged switches affect troubleshooting and VLAN segmentation. Managed switches (HPE Aruba, Cisco, Netgear ProSAFE M-series) support VLANs, link-aggregation, port mirroring, and SNMP monitoring — essential for any deployment over 16 cameras or with mixed traffic. Unmanaged switches work for small isolated camera networks but limit growth and troubleshooting visibility.
Layer 3 capability (routing, VLAN inter-VLAN routing) becomes important when surveillance, access control, and corporate traffic share the same physical network. Surveillance VLAN isolation is now standard practice — segregate camera traffic from corporate Wi-Fi and guest networks to prevent broadcast storms and lateral attack paths. Confirm the switch supports the VLAN count and ACL complexity you need.
Outdoor/industrial deployments need ruggedized switches. ComNet, Antaira, and Moxa make hardened switches rated for -40°C to +75°C, vibration, and waterproof housings. DIN-rail mounting fits standard outdoor enclosures. Standard data-closet switches in outdoor enclosures fail within 1-2 years from condensation and temperature swings; spec the right environment rating up front.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE, PoE+, AC/DC, PoE++ |
| Type | Switch, PoE Extender, PoE Injector, Ethernet Extender, Power Supply, Media Converter, Adapter, Enclosure |
| Durability | Indoor, Outdoor |
Top Brands in This Category
Frequently Asked Questions
What's the difference between managed and unmanaged PoE switches?
Unmanaged switches power-on and forward traffic without configuration — simplest deployment but no VLAN, no monitoring, no troubleshooting visibility. Managed switches add VLANs, link-aggregation, port mirroring, SNMP, and remote-management interfaces. For deployments above 16 cameras or those sharing infrastructure with other systems, managed is the right choice; the per-port cost is modest and the operational benefit is large.
How much PoE budget should I size for?
Sum the PoE-class budget of all PoE-powered devices, then add 20-30% headroom for growth. Eight 802.3at cameras at 30W max each is 240W minimum — but a 130W-budget 8-port PoE+ switch can't deliver that. Confirm both per-port budget and total PoE budget; many entry-level switches advertise PoE+ ports but cap aggregate budget at half the per-port maximum.
Do I need 10 Gbps uplinks?
For installations under 32 cameras with mid-resolution streams, 1 Gbps uplinks suffice. Above that, or when you need fast investigative playback for many simultaneous reviewers, 10 Gbps (SFP+) uplinks remove the choke point. NVRs writing to NAS over the network also benefit. SFP+ has become reasonably affordable on managed switches; opt for it on new installs over 16 cameras.
Can I run VoIP and video on the same switch?
Yes — modern managed switches use VLAN segregation to keep VoIP, video, and data traffic separated even on shared physical ports. Use QoS (Quality of Service) to prioritize VoIP for low latency and assign video its own queue. Avoid mixing untagged traffic types on a single switch port without VLAN configuration; broadcast storms and bandwidth competition cause both voice and video quality issues.
What's the right uplink between buildings on a campus?
Single-mode fiber for runs over 100 m, multi-mode for shorter runs (typically up to 550 m on OM3, 300 m on OM4 at 10 Gbps). Bidirectional SFPs (single fiber instead of pair) save fiber count when the run is already deployed. Avoid copper between buildings — ground-potential differences during lightning strikes destroy switch SFP modules even when surge-protected.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.