Infrastructure
Sub categories
Showing Results for Infrastructure
-
NETGEAR
SKU: WAX615-100NAS
NETGEAR 1PT Insight Managed Wifi 6 AX3000 Ideal - WAX615-100NAS
- WiFi 6 (802.11ax) delivers 3 Gbps aggregate across 2.4 GHz and 5 GHz bands.
- PoE+ (802.3at, 30W max) eliminates AC wiring runs to wall or ceiling mount points.
- NETGEAR Insight cloud management enables zero-touch provisioning with no local controller.
$296.37 $169.99 Save $126.38 -
NETGEAR
SKU: WAX618-111NAS
NETGEAR 1PT INSIGHT MANAGED WIFI 6 AX3000 ideal - WAX618-111NAS
- WiFi 6 AX3000 delivers 2.4 Gbps combined across 5 GHz and 2.4 GHz bands.
- Cloud-managed via Insight—no on-site controller needed for multi-site deployments.
- 802.3af/at PoE powered (~20 W typical), eliminating separate AC runs at mount point.
$499.16 $299.99 Save $199.17 -
NETGEAR
SKU: APM414SD-10000S
NETGEAR 2 Neutrik DUO Fiber MMF Port Card - APM414SD-10000S
- Two Neutrik DUO fiber ports eliminate accidental disconnection during live maintenance.
- MMF operation at 850nm over OM3/OM4 reaches 300+ m without active repeaters.
- Hot-swap card design allows insertion/removal in live NETGEAR chassis without reboot.
$1,882.74 $1,203.99 Save $678.75 -
NETGEAR
SKU: AXC7620-10000S
Netgear 20M Direct Attach Active Optical Sfp+ - AXC7620-10000S
- Spans 20 m over active optical fiber, exceeding 7 m passive copper DAC limits.
- Delivers 10 Gbps full-duplex throughput for 4K multi-camera ingest and NVR storage runs.
- Plug-and-play SFP+ ends fit NETGEAR M4300, Cisco Nexus, Juniper, and Hikvision NVRs.
$82.71 $55.99 Save $26.72 -
NETGEAR
SKU: GS728TPP-300NAS
NETGEAR 24 Port Gigabit Ethernet PoE+ Smart - GS728TPP-300NAS
- 24 PoE+ ports deliver up to 30W each, eliminating separate power injectors.
- 380W total budget supports 12–16 high-power cameras or mixed PoE/PoE+ loads.
- Four dedicated 1G SFP uplinks preserve all 24 access ports for edge devices.
$760.33 $446.99 Save $313.34 -
NETGEAR
SKU: GS724TPP-300NAS
NETGEAR 24-Port Gigabit PoE+ Smart Switch with - GS724TPP-300NAS
- 24 PoE+ ports at 802.3at (30W each) support high-power IP cameras and readers.
- 380W aggregate budget powers 12–16 full-draw PoE+ devices without injectors.
- Dual SFP uplinks isolate fiber backhaul from edge PoE traffic on dense deployments.
$709.65 $416.99 Save $292.66 -
NETGEAR
SKU: GS524UP-100NAS
Netgear 24-PORT High-power Poe+ Gigabit - GS524UP-100NAS
- All 24 ports deliver up to 30W PoE+ (802.3at), eliminating external injectors.
- 380W total PoE budget supports up to 24 cameras averaging 15W each.
- Managed switch enables VLANs, QoS, and port mirroring to isolate camera traffic.
$725.90 $471.99 Save $253.91 -
NETGEAR
SKU: GS728TXUP-300NAS
NETGEAR 24P GE Poe++ Smart Swth W/10G Sfp+ - GS728TXUP-300NAS
- 720W 802.3bt PoE++ budget powers 20+ cameras at up to 95W each without injectors.
- 24 Gigabit RJ45 ports negotiate 802.3af/at/bt automatically per connected device.
- Dual 10G SFP+ uplinks trunk video traffic to NVR/VMS without backhaul saturation.
$1,057.23 $646.99 Save $410.24 -
NETGEAR
SKU: XS724EM-200NAS
NETGEAR 24PT 10G/MULTI-GIG Easy Smart Swch - XS724EM-200NAS
- All 24 RJ-45 ports run line-rate 10G non-blocking for zero oversubscription.
- Multi-Gig auto-negotiation supports 2.5G/5G/10G — no recabling mixed-speed devices.
- Web GUI, SNMP, and CLI management enable VLAN segmentation across traffic zones.
$2,717.50 $1,523.99 Save $1,193.51 -
NETGEAR
SKU: MS324TXUP-100NAS
NETGEAR 24PT MG U60 Poe++ Smart Switch - MS324TXUP-100NAS
- All 24 RJ-45 ports deliver 802.3bt PoE++ at up to 90W each, no injectors needed.
- 360W total PoE budget supports 16+ high-power PTZ or thermal cameras simultaneously.
- Layer 2/3 management with VLAN, QoS, and SNMP enables clean camera/IT segmentation.
$2,433.09 $1,401.99 Save $1,031.10 -
NETGEAR
SKU: GS728TXP-300NAS
NETGEAR 28-PORT POE GIGABIT/10G Stackable - GS728TXP-300NAS
- 24 PoE+ ports deliver up to 30W each on a 195W budget, eliminating power injectors.
- Two 10G SFP+ uplinks prevent throughput collapse when aggregating 24+ HD video streams.
- 802.1Q VLANs, QoS, 802.1X, and SNMP enable full segmentation and access control.
$709.65 $435.99 Save $273.66 -
NETGEAR
SKU: RBS760-100NAS
NETGEAR 2PT Orbi RBS760 - RBS760-100NAS
- Two-node mesh kit eliminates dead zones across warehouses and multi-story sites.
- Dedicated backhaul band isolates client traffic, keeping surveillance streams stable.
- PoE support and gigabit Ethernet uplink simplify structured-cable deployments.
$387.91 $269.99 Save $117.92 -
NETGEAR
SKU: RS500-100NAS
NETGEAR 3PT Nighthawk WIFI 7 BE12000 Rout - RS500-100NAS
- WiFi 7 (802.11be) BE12000 delivers aggregate throughput across 2.4/5/6 GHz tri-band.
- 3-unit mesh topology eliminates dead zones across multi-building or warehouse deployments.
- 6 GHz band offloads high-density camera streams, reducing congestion for legacy devices.
$620.67 $433.99 Save $186.68 -
NETGEAR
SKU: RS150-100NAS
NETGEAR 3PT Nighthawk WIFI 7 BE5000 Rout - RS150-100NAS
- WiFi 7 (802.11be) BE5000 class handles concurrent 4K streams without frame drops.
- 3-unit mesh pack covers multiple floors or buildings with automatic node failover.
- Per-node Ethernet ports enable wired backhaul to isolate security traffic on each segment.
$310.33 $217.99 Save $92.34 -
NETGEAR
SKU: APM414C-10000S
NETGEAR 4 10GBASE-T RJ45 Port Card - APM414C-10000S
- Adds four 10GBASE-T RJ45 ports for 40 Gbps aggregate uplink capacity.
- Hot-swappable design allows installation or removal without chassis shutdown.
- Uses standard Cat6A/Cat7 cabling — no proprietary optics or connectors needed.
$868.95 $555.99 Save $312.96 -
NETGEAR
SKU: GS752TXUP-300NAS
NETGEAR 48P GE Poe++ Smart Swth W/10G Sfp+ - GS752TXUP-300NAS
- All 48 GbE ports deliver up to 90W PoE++ (802.3bt), eliminating external injectors.
- Dual 10G SFP+ uplinks provide non-blocking backhaul to NVRs and video management servers.
- Built-in VLAN, QoS, and static routing isolate camera traffic without a separate appliance.
$1,824.82 $1,100.99 Save $723.83
Infrastructure
Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.
Plan Your Deployment
- Total PoE power budget and port density requirements
- Switch throughput and uplink capacity planning
- Redundancy and failover design considerations
- Distance limitations and fiber conversion needs
- Power conditioning and voltage compatibility















