Door Hardware & I/O
Sub categories
Showing Results for Door Hardware & I/O
-
Camden
SKU: CM-AF500
Camden CM-AF500 Single Gang LED Illuminated Annunciator
- Display remains dark when off, eliminating visual cues that enable tailgating.
- Field-selectable 12/30V AC/DC integrates directly into existing low-voltage circuits.
- Single-gang form factor mounts flush in standard boxes alongside readers and buttons.
$149.00 $89.99 Save $59.01The item has been added -
Camden
SKU: CM-AF501SO
Camden CM-AF501SO Single Gang LED Annunciator with Adjustable
- Operates on 12/24V AC/DC (±10%), eliminating separate supply transformers on most installs.
- Mounts to any standard single gang box with 9/18" depth, simplifying retrofit into tight wall cavities.
- Compatible with electric strikes, electromagnetic locks, and electric door operators via relay output wiring.
$183.99The item has been added -
Camden
SKU: CM-AF550R
Camden CM-AF550R Double Gang Mushroom Push Button Red
Double gang mushroom button for TCP/IP access control at 30VDC
- Mushroom push button design with double gang form factor for tactile actuation
- TCP/IP networked communication compatible with HID-based credential systems
- Red housing, 30VDC operation standard for professional access control installations
$287.00 $175.99 Save $111.01The item has been added -
Camden
SKU: CM-PT250SS-12
Camden CM-PT250SS-12 Stainless Steel Endcaps 12"
12" stainless steel endcaps for Camden mounting frames, indoor/outdoor
- 304 stainless steel construction resists corrosion in wet or outdoor environments
- 12-inch length fits Camden mounting frame assemblies and compatible systems
- Suitable for both indoor and outdoor security and access control installations
$18.00 $11.99 Save $6.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-PT250SS-18
Camden CM-PT250SS-18 Stainless Steel Endcaps 18"
- 300-series stainless endcaps resist corrosion in salt-spray and high-humidity sites.
- 1/4" ID fits up to four 22 AWG or two 18 AWG conductors for standard strike circuits.
- 18" length suits frame-to-panel runs in 36"–48" rough openings without splicing.
In stock · Ships same business day$20.00 $12.99 Save $7.01The item has been added -
Camden
SKU: CM-PT250SS-24
Camden CM-PT250SS-24 Stainless Steel Endcaps 24"
- 304-grade stainless endcaps resist corrosion in salt-air and high-humidity outdoor installs.
- 24" length spans standard door frames without splices, reducing signal-run failure points.
- 1/4" bore accepts 4x22 AWG or 2x18 AWG wire; terminates on-site with no special tools.
$24.00 $14.99 Save $9.01The item has been added -
Camden
SKU: CM-PT250SS-36
Camden CM-PT250SS-36 Stainless Steel Endcaps 36 Inch
- 300-series stainless steel resists corrosion in high-humidity and coastal environments.
- 1/4" bore fits 4-conductor 22 AWG and 2-conductor 18 AWG access control cables cleanly.
- 36-inch length covers panel-to-door runs and extended raceway segments in one piece.
$30.00 $18.99 Save $11.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-PT375SS-12
Camden CM-PT375SS-12 Stainless Steel Endcaps 12 Inch
- 300-series stainless endcaps resist washdown, salt spray, and moisture-driven corrosion.
- 3/8" ID tube routes up to 16×22 AWG or 8×18 AWG conductors in a single pass.
- 12-inch length fits standard commercial door frames without on-site trimming.
In stock · Ships same business day$20.00 $12.99 Save $7.01The item has been added -
Camden
SKU: CM-PT375SS-24
Camden CM-PT375SS-24 Stainless Steel Endcaps 24"
- Stainless steel housing resists corrosion in salt-air and wet environments for 10+ years.
- Carries 16× 22 AWG or 8× 18 AWG conductors through a 3/8" ID protective sleeve.
- 24" length bridges standard 18–30" door-to-frame spans; 36" variant available for wider gaps.
$28.00 $17.99 Save $10.01The item has been added -
Camden
SKU: CM-PT375SS-36
Camden CM-PT375SS-36 Stainless Steel Endcaps 36 Inch
- 304 stainless steel resists corrosion in salt-air, high-humidity, and exterior sites.
- 36-inch length spans full door frames, minimizing mid-run splices and failure points.
- 3/8-inch ID supports 16-conductor 22 AWG or 8-conductor 18 AWG power transfer wire.
$34.00 $20.99 Save $13.01The item has been added -
Camden
SKU: CM-RFK354
Camden CM-RFK354 Exit Buttons
TCP/IP networked exit button with HID credential support for access control
- Network-based REX signaling integrates directly with TCP/IP access control panels
- HID credential compatibility ties into existing cardholder databases and systems
- Centralized monitoring with audit trail logging for remote exit request verification
$520.00 $318.99 Save $201.01The item has been added -
Camden
SKU: CM-RFK454
Camden CM-RFK454 Exit Buttons
- TCP/IP connectivity integrates directly into existing IP network infrastructure without dedicated controller wiring.
- HID credential support ensures compatibility with established card and badge reader ecosystems.
- Kinetic battery-less push plates eliminate battery maintenance across wall and column mount deployments.
$550.00 $336.99 Save $213.01The item has been added -
Camden
SKU: CM-RFK464
Camden CM-RFK464 Exit Buttons
- TCP/IP communication integrates directly into IP-native access control networks.
- HID credential support simplifies deployment in mixed-vendor reader environments.
- Kinetic, battery-less switch operation eliminates wiring to a power source at the door.
$550.00 $336.99 Save $213.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-RFL354-A
Camden CM-RFL354-A Exit Button Credential Reader
HID credential exit button with TCP/IP networking and 30VDC power
- HID-compatible credential reading integrates with existing badge systems
- TCP/IP communication connects directly to networked access control platforms
- 30VDC operation requires dedicated power provisioning at exit point
In stock · Ships same business day$450.00 $275.99 Save $174.01The item has been added -
Camden
SKU: CM-RFL452-SA
Camden CM-RFL452-SA Exit Buttons
- Operates at 30VDC, aligning with standard access control power infrastructure.
- Wall or recessed mount options support flexible door-side deployment in any installation.
- Includes CM-TX-9 wall switch transmitter for wireless door control system integration.
$495.00 $302.99 Save $192.01The item has been added -
Camden
SKU: CM-RFL454-LPA
Camden CM-RFL454-LPA Exit Buttons
TCP/IP exit button with HID credential reader for networked access control
- IP-addressable device integrates directly into networked security systems
- Supports HID iCLASS and proximity credentials on 30VDC power supply
- Request-to-exit button functionality for facility entry and exit points
$495.00 $302.99 Save $192.01The item has been added
Door Hardware & I/O
Door hardware and I/O components connect physical doors to your access control system. From electric strikes and magnetic locks to exit devices and relay modules, proper hardware selection ensures safe, compliant, and reliable operation.
Plan Your Deployment
- Fail-safe vs fail-secure lock configuration
- Door type (wood, metal, glass, storefront)
- Request-to-exit (REX) device requirements
- Power supply and voltage compatibility
- Local life-safety and fire code compliance
Door Hardware & I/O — Engineering-Grade Door Hardware for Commercial Deployments
This category covers 532 working models of door hardware & i/o sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Fail-safe versus fail-secure determines what happens during power loss. Fail-safe locks unlock on power loss (used on egress doors where life safety dominates); fail-secure locks remain locked (used on storage, server rooms, and exterior doors where security dominates). Code typically mandates fail-safe on stairwell and egress doors. Confirm with the AHJ before specifying — misapplied lock mode is a common code violation.
Strike, mortise, magnetic lock, and electrified panic hardware each have distinct installation, current draw, and code implications. Electric strikes work with most mechanical locksets and are easiest to retrofit. Magnetic locks (maglocks) provide high holding force on glass and wood doors but require dedicated REX and panic-bar interfaces for egress compliance. Verify the door's existing prep before choosing.
Power draw and inrush current dictate power supply sizing. A 5-door system with 1A peak per lock can exceed an undersized 12VDC supply at simultaneous lock-down events. Account for accessories — REX motion sensors, door-position switches, electrified levers — when sizing the supply and the battery backup required for code compliance.
Tamper switches, door-position monitoring, and request-to-exit sensors generate the audit trail your security team needs. Mechanical contact switches are cheaper; magnetic reed switches resist tampering better. Pair each door with a position switch and a REX sensor at minimum — without door-position monitoring, you can't distinguish 'authorized entry' from 'door held open after authorized entry,' which is a common compliance gap.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 8MP, 2MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired |
| Power | AC/DC, Battery |
| Type | Accessory, Controller, Cable, Switch, Power Supply, Access Card, Contact, Lock/Strike |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Fail-safe or fail-secure for stairwell doors?
Fail-safe is mandatory on most stairwell doors and other code-designated egress paths — the lock must release on fire alarm or power loss to allow evacuation. Fail-secure on those doors is a code violation. Confirm the local fire code and AHJ requirements; commercial buildings in the U.S. follow NFPA 101 and the International Building Code, both of which detail egress lock behavior in detail.
What current draw should I plan for electrified locks?
Typical 12VDC electric strikes draw 200-500 mA continuous, with inrush spikes of 1-2A at engagement. Magnetic locks rated for 1,200 lbs holding force draw around 500 mA continuous at 24VDC. Power supplies need to handle simultaneous lock-down current — emergency lockdown events activate all locks at once. Size the supply with at least 25% headroom and confirm battery backup runtime requirements.
Do I need a request-to-exit (REX) sensor?
Most code-compliant electrified door installations require a REX sensor to shunt the alarm during authorized egress. Without REX, every egress event registers as a forced-door alarm. PIR motion sensors are the common choice and integrate with the door controller's REX input. Mechanical push-bar REX is also acceptable for hardware that includes that switch natively.
Can I use one lock for both card and mechanical key entry?
Yes — most electrified strikes and locks allow mechanical key override on the same door. Maintaining a master key for emergency mechanical access is required by code in many jurisdictions and recommended in all. Document the master key holders carefully; an uncontrolled master key program undermines the electronic audit trail.
What's the lifespan of a magnetic lock?
Quality maglocks (Securitron M62, HES, von Duprin) typically last 15-20 years with no mechanical wear. Failure points are the connector, the armature plate-to-lock alignment, and contamination of the magnetic face. Plan for armature replacement at year 10 as a hedge against alignment drift. Strike-type locks with mechanical parts last 5-10 years before strike-plate wear becomes a reliability issue.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.