Lifesafety Power · FPO150/250-2C83D8PE4

Lifesafety Power FPO150/250-2C83D8PE4 250W power supply 20A/12V

Dual-output power supply rated for 250W (or 150W in single-output mode) that delivers simultaneous 12V or 24V feeds on independent Bus1 and Bus2

• Dual-bus architecture delivers independent 12V/24V feeds without added infrastructure.
• Eight Class 2 DC outputs at 2.5A each power readers, mag-locks, and solenoid gates.
• Eight relay outputs support failsafe, failsecure, and FAI modes for life-safety compliance.

Lifesafety Power · FPO150/250-2C83D8PE4M1

Lifesafety Power FPO150/250-2C83D8PE4M1 Power supply board 150W

Dual-voltage power supply engineered for access control, surveillance, and life safety systems requiring simultaneous 12VDC and 24VDC distribution

• Dual 12VDC/12A and 24VDC/10A outputs eliminate the need for two separate supplies.
• 24 auxiliary outputs support readers, PoE injectors, and field panels without daisy-chaining.
• 16 lock supervisory channels enable real-time door state and forced-entry monitoring.

Lifesafety Power · FPO150/250-2C83D8PE4M1/P16-A

Lifesafety Power FPO150/250-2C83D8PE4M1/P16-A 150W power supply

150W/250W dual-output power supply for access control and door lock systems

• Dual-output design delivers up to 20A/12V or 10A/24V to scale with site load.
• 16 independently fused 3A relay outputs support FAI, failsafe, or failsecure modes.
• E4 enclosure with Mercury LP1502/MR52 support centralizes control for up to 16 doors.

Lifesafety Power · FPO150/250-2C83D8PE6M1

Lifesafety Power FPO150/250-2C83D8PE6M1 Power supply board 150W

150W power supply board manufactured by Lifesafety Power, designed to deliver regulated DC output to security and access control systems

• Selectable 12VDC/24VDC output supports mixed-voltage device classes in one installation.
• Delivers up to 12A at 12VDC or 6A at 24VDC for mid-range access control power budgets.
• Board-level form factor integrates into existing FPO series enclosures and cabinet builds.

Lifesafety Power · FPO150/250-2C83D8PE8M1/P16-A

Lifesafety Power FPO150/250-2C83D8PE8M1/P16-A Power supply board

Selectable dual-output power supply designed for distributed access control deployments

• Selectable 150W or 250W output matches load profile at 12VDC or 24VDC.
• 16 independently fused 3A relay outputs allow per-door failsafe/failsecure config.
• Bus1/Bus2 auxiliary signaling supports supervision across networked multi-door systems.

Lifesafety Power · FPO150/250-2C83D8PE8M1/P16-B

Lifesafety Power FPO150/250-2C83D8PE8M1/P16-B 150W power supply

Dual-output power supply designed for access control and security infrastructure deployments where multiple door locks, magnetic locks, and auxiliary

• 16 independently fused 3A relay outputs eliminate external relay modules in multi-door cabinets.
• Selectable 12V/24V dual output scales from 12A to 20A to match panel voltage requirements.
• Per-output failsafe, failsecure, or FAI mode isolates lock failures without disrupting other circuits.

Lifesafety Power · FPO150/250-2C83D8PE8M2/T16-C

Lifesafety Power FPO150/250-2C83D8PE8M2/T16-C Mercury ProWire FPO

Dual-voltage UL-listed power supply designed for access control and security systems requiring integrated power distribution, battery backup, and

• 400W total output across dual 12V/24V zones eliminates external converters in mixed deployments.
• 3 D8P auxiliary circuits (2.5A Class 2 each) and 2C8 relay outputs (3A fused) on a single board.
• Hardwired fire alarm disconnect triggers automatic door unlock via Form C NC/NO selectable contacts.

Lifesafety Power · FPO150/250-2C84D8E8M3/P16-A

Lifesafety Power FPO150/250-2C84D8E8M3/P16-A 150W power supply

• Dual-voltage output (12V/24V) supports legacy and modern devices from a single unit.
• 8 relay outputs with per-output FAI, failsafe, or failsecure assignment for precise lock control.
• Independent 3A per-output fusing prevents single load failure from cascading across the panel.

Lifesafety Power · FPO150/250-2C8D8E8S

Lifesafety Power FPO150/250-2C8D8E8S Software House Unified Pow

UL-listed dual-voltage power supply engineered for distributed access-control systems that demand redundancy, fault reporting, and integrated

• Dual 12V/24V output from a single 400W supply eliminates secondary power modules.
• 16 relay lock outputs (3A fused, failsafe/failsecure) support up to 32+ door controllers.
• Built-in fire-alarm Form C disconnect unlocks doors automatically without external relays.

Lifesafety Power · FPO150/250-2C8P2D8PE6M1

Lifesafety Power FPO150/250-2C8P2D8PE6M1 Mercury Unified Power Sy

Unified power distribution system designed for access control and life-safety applications requiring integrated battery backup, fire alarm

• Dual 12V/24V output buses eliminate separate voltage supplies for mixed-load deployments.
• 16 relay lock outputs (2.5A Class 2) support failsafe or failsecure operation per zone.
• 16 auxiliary outputs with per-zone OutSmart LEDs deliver real-time power status feedback.

Lifesafety Power · FPO150/250-2C8P2D8PE6V1

Lifesafety Power FPO150/250-2C8P2D8PE6V1 Power supply board 150W

Board-level 150W power supply rated for 12VDC output at 12A (primary channel) or dual 6A channels — designed for compact cabinet integration in

• Delivers 150W at 12VDC/12A to power cameras, controllers, and aux devices from one rail.
• Dual 6A channels with independent protection prevent a single fault from cascading across zones.
• Board-mount form factor integrates directly into compact OEM cabinets and custom enclosures.

Lifesafety Power · FPO150/250-2C8P2D8PE8H1/T16-D

Lifesafety Power FPO150/250-2C8P2D8PE8H1/T16-D 150W power supply

Redundant, dual-channel power supply designed to support distributed access control, lock management, and auxiliary circuits in mid-scale security

• 16 independently controlled channels (8 relay + 8 DC aux) at 2.5A each reduce secondary modules.
• Selectable 12VDC or 24VDC output scales from 150W to 250W to match mixed lock and reader loads.
• Per-output failsafe, failsecure, or failsoft relay modes define exact lock state on power loss.

Lifesafety Power · FPO150/250-2C8P2D8PE8M2

Lifesafety Power FPO150/250-2C8P2D8PE8M2 FPO150/250 dual voltage

Dual voltage power supply designed for commercial access control, fire alarm, and integrated security system deployments

• Accepts 120VAC or 240VAC automatically—no jumpers, one SKU covers mixed-voltage sites.
• Dual 12VDC output rails let door locks, readers, and intercoms run on independent circuits.
• Onboard dual-channel battery charging keeps critical loads live during mains power loss.

Lifesafety Power · FPO150/250-2C8P2D8PE8M3

Lifesafety Power FPO150/250-2C8P2D8PE8M3 150W power supply 12A/1

Selectable dual-output power supply designed to feed both powered endpoints and access control infrastructure from a single chassis

• Selectable 150W or 250W output eliminates separate supplies for mixed 12V/24V loads.
• 16 relay lock outputs at 2.5A each support independent fail-safe or fail-secure switching.
• 16 DC auxiliary outputs on isolated dual-bus architecture prevent cascade failure on shorts.

Lifesafety Power · FPO150/250-2C8P3D8PE6M1/P16-A

Lifesafety Power FPO150/250-2C8P3D8PE6M1/P16-A 150W power supply

Dual-voltage access control power supply designed to provision and control electromagnetic and fail-safe locks across multi-door installations

• Dual-voltage output (12VDC/12A or 24VDC/10A) adapts to run length and lock infrastructure.
• 16 relay lock outputs, each independently configurable failsafe or failsecure per door zone.
• 8 auxiliary class 2 outputs support sensors and supervision devices on two assignable buses.

Lifesafety Power · FPO150/250-2C8P3D8PE8M1-WP-AMZ01

Lifesafety Power FPO150/250-2C8P3D8PE8M1-WP-AMZ01 Amazon Custom

Configurable 24VDC power supply designed for small-to-mid-scale access control and security systems

• Selectable 150W or 250W output prevents brownout across simultaneous multi-door actuations.
• 16 Class 2 outputs (8 relay + 8 aux) each rated 2.5A with per-output fail-safe/fail-secure control.
• Fits E8 enclosure (36H×30W×4.5D in.) with Mercury back plate for clean panel or rack installs.

Lifesafety Power · FPO150/250-2C8P3D8PE8M1/P16-A

Lifesafety Power FPO150/250-2C8P3D8PE8M1/P16-A 150W PS 12A/12V

Dual-output power supply designed for security and access control installations where relay-driven lock management and auxiliary device control are

• Selectable 150W/12A or 250W/20A output matches load without upsizing the enclosure.
• 16 relay lock outputs, each 2.5A, support FAI, failsafe, or failsecure per door.
• 8 auxiliary 24VDC outputs feed readers and REX sensors without external supplies.

Lifesafety Power · FPO150/250-2C8P3D8PE8M1/P16-C

Lifesafety Power FPO150/250-2C8P3D8PE8M1/P16-C 150W power supply

Dual-output power supply designed to serve access control and security system infrastructure in small-to-medium deployments

• Selectable 12V/24V output (150W or 250W) matches mixed door-lock and reader specs.
• 8 relay outputs with per-channel FAI, failsafe, or failsecure mode simplify mixed hardware integration.
• 8 auxiliary DC outputs (2.5A each, Class 2) enable independent supervision of separate security zones.

Lifesafety Power · FPO150/250-2C8P3D8PE8M2/P16-B

Lifesafety Power FPO150/250-2C8P3D8PE8M2/P16-B Mercury ProWire Pr

Dual-voltage power supply and access control integration platform designed for mid-to-large door control deployments requiring centralized battery

• Dual 12V/24V DC output supports mixed legacy and modern lock standards on one system.
• 400W capacity scales to 16+ door campuses without additional UPS infrastructure.
• Factory-configured fire alarm disconnect unlocks all egress doors on panel signal, no extra relay logic needed.

Lifesafety Power · FPO150/250-2C8P3D8PE8M2/P16-C

Lifesafety Power FPO150/250-2C8P3D8PE8M2/P16-C 150W power supply

150W power supply delivering 12A at 12VDC or 6A at 24VDC—sized for distributed camera and access control installations where a centralized PoE switch

• Dual-voltage output (12VDC/12A or 24VDC/6A) eliminates separate supply SKUs in mixed deployments.
• 16 discrete outputs (eight 12V, eight 24V) distribute power across cameras, readers, and locks.
• AC 110–240V universal input accepts any site mains standard without an external transformer.

Lifesafety Power · FPO150/250-2C8P3D8PE8M3

Lifesafety Power FPO150/250-2C8P3D8PE8M3 Mercury Unified Power Sy

Unified power distribution and backup system designed for mid-scale access control deployments requiring redundant power management, fire life-safety

• 400W dual-voltage output supports mixed 12V/24V lock and reader hardware in one enclosure.
• 16 relay lock outputs programmable failsafe or failsecure per zone at 2.5A Class 2 rated.
• Integrated fire alarm disconnect logic auto-unlocks doors on alarm activation for safe egress.

Lifesafety Power · FPO150/250-2C8P3D8PE8S

Lifesafety Power FPO150/250-2C8P3D8PE8S 150W power supply 12A/12

250W power supply designed to centralize power distribution for access control systems, door locks, and auxiliary security devices in enterprise or

• Selectable 12VDC/24VDC output delivers 20A or 10A to match your lock load requirements.
• Two independent relay outputs support per-door failsafe or failsecure config without external relays.
• Three 2.5A auxiliary outputs power readers, REX buttons, or sensors directly from the same module.

Lifesafety Power · FPO150/250-2C8P5D8PE8M2

Lifesafety Power FPO150/250-2C8P5D8PE8M2 150W PS 12A/12V or 6A/24

Configurable DC power supply designed for distributed access control and life safety installations where multiple door locks, badge readers, and

• Dual-voltage output (12V/24V selectable) eliminates separate distribution modules on multi-door sites.
• 16 relay lock outputs, each independently set failsafe or failsecure, covering up to 16 door pairs.
• 40 auxiliary Class 2 outputs isolate reader and sensor loads from lock circuits, reducing nuisance releases.

Lifesafety Power · FPO150/250-2C8PE2

Lifesafety Power FPO150/250-2C8PE2 150W PS 12A/12V or 6A/24V 8 DC

150W Class 2 power-limited auxiliary supply designed for mid-scale access control, fire alarm, and surveillance installations requiring centralized

• Delivers 12A at 12V or 6A at 24V across eight individually addressable DC outputs.
• Each output sources up to 2.5A with Bus1/Bus2 selectivity for load balancing.
• Class 2 power-limited design eliminates field current-limiting devices, cutting BOM cost.

Lifesafety Power · FPO150/250-2D82M8NLCE4

Lifesafety Power FPO150/250-2D82M8NLCE4 150W power supply 12A/12

Configurable power supply designed for security and life-safety systems requiring redundant or scalable 12VDC and 24VDC distribution

• Selectable 150W/250W capacity supports 12VDC or 24VDC mixed-voltage load deployments.
• Eight independently fused 3A outputs prevent cascading failures across cameras and readers.
• Field-selectable Bus1/Bus2 per output enables N+1 or parallel redundancy in one enclosure.

Lifesafety Power · FPO150/250-2D82M8NLCE8M

Lifesafety Power FPO150/250-2D82M8NLCE8M 150W power supply 12A/1

Configurable 150W/250W power supply engineered for distributed access control and security system deployments

• Dual-mode output scales from 150W (12A/12V) to 250W (20A/12V) as load grows.
• Eight independently fused 3A DC outputs support per-circuit protection across readers and locks.
• Bus1/Bus2 selectable routing on each output enables modular multi-door system design.

Lifesafety Power · FPO150/250-2D82M8NLCE8M2

Lifesafety Power FPO150/250-2D82M8NLCE8M2 150W power supply 12A

Configured dual-output power supply handling both 12VDC and 24VDC distribution in a single compact enclosure

• Dual-bus 12VDC/24VDC distribution isolates faults per output, preventing cascade failures.
• Eight independently fused 3A outputs let you assign and isolate circuits across two voltage rails.
• Scales from 150W (12A) to 250W (20A) at 12V to match growing camera or reader endpoint loads.

Lifesafety Power · FPO150/250-2D82M8NLCE8S

Lifesafety Power FPO150/250-2D82M8NLCE8S 150W power supply 12A/1

Configurable managed power supply unit designed for distributed surveillance and access control installations where multiple endpoints require

• Dual-bus architecture with 8 individually fused 3A outputs prevents single-endpoint failures from cascading.
• Scales from 150W to 250W and supports both 12VDC and 24VDC to match existing infrastructure.
• E8 enclosure (36H×30W×6.5D in.) fits standard 19-inch racks or wall-mount equipment rooms.

Lifesafety Power · FPO150/250-2D8E6S

Lifesafety Power FPO150/250-2D8E6S 150W PS 12A/12V or 6A/24V 250W

N industrial-grade power supply engineered for multi-circuit access control and alarm system deployments

• Selectable 12A/12V or 6A/24V primary output accommodates mixed-voltage panel designs.
• 16 independently fused 3A auxiliary circuits isolate faults without disrupting remaining outputs.
• E6 enclosure (30H×23W×6.5D in.) fits standard rack-mount and wall-cavity installations.

Lifesafety Power · FPO150/250-2D8P2M8NLCE4M1

Lifesafety Power FPO150/250-2D8P2M8NLCE4M1 150W power supply 12A

Compact, dual-output power supply designed for distributed security infrastructure where multiple endpoints require independent, supervised power

• Dual-bus architecture isolates faults so a failed circuit doesn't drop remaining outputs.
• Eight class-2 auxiliary outputs at 2.5A each support cameras, readers, and locks independently.
• Scales from 150W/12A to 250W/20A at 12V to match site load growth without chassis swap.

Lifesafety Power · FPO150/250-2D8P2M8NLCE6M1

Lifesafety Power FPO150/250-2D8P2M8NLCE6M1 150W power supply 12A

Dual-rail, field-selectable power supply designed for distributed security installations requiring independent supervision and selective sourcing

• Field-selectable 150W or 250W output supports 12VDC and 24VDC endpoints from one unit.
• Eight 3A fused outputs assign independently to Bus 1 or Bus 2, reducing single-point failure.
• Eight class 2 aux outputs at 2.5A each support mixed loads: cameras, relays, and intercoms.

Lifesafety Power · FPO150/250-2D8P2M8NLCE8M

Lifesafety Power FPO150/250-2D8P2M8NLCE8M 150W power supply 12A

Configurable power supply designed for medium-scale security and access control deployments where redundancy and distributed power management matter

• Selectable 150W or 250W mode lets you right-size capacity at commissioning without field mods.
• Eight independently fused 3A class 2 outputs prevent a single device fault from cascading to others.
• Bus 1/Bus 2 assignment distributes auxiliary loads across two circuits, reducing single-point-of-failure risk.

Lifesafety Power · FPO150/250-2D8P2M8NLCE8M1

Lifesafety Power FPO150/250-2D8P2M8NLCE8M1 150W power supply 12A

Compact power supply designed for distributed security and access control installations

• Eight individually fused 2.5A outputs isolate faults without disrupting the full system.
• Dual-bus architecture lets you segregate cameras, readers, and auxiliaries on one supply.
• Switchable 150W or 250W capacity supports 12VDC or 24VDC per output to match device needs.

Lifesafety Power · FPO150/250-2D8P2M8NLCE8M2

Lifesafety Power FPO150/250-2D8P2M8NLCE8M2 150W PS 12A/12V or 6A

Compact, multi-output power distribution system designed for access-control, intrusion, and fire-alarm panel integration in commercial security

• Dual main rails deliver 150W or 250W at selectable 12V/24V for flexible load matching.
• Eight Class 2 auxiliary outputs at 2.5A each eliminate separate supplies for strikes and sensors.
• Fused 3A-per-output distribution module isolates faults and speeds field replacement.

Lifesafety Power · FPO150/250-2D8P2M8NLCE8M2/P

Lifesafety Power FPO150/250-2D8P2M8NLCE8M2/P 150W power supply

Dual-output power supply delivering 150W or 250W capacity

• Dual-capacity design supports 150W or 250W to scale with site power demands.
• 8 individually fused auxiliary outputs simplify multi-door access control wiring.
• Class 2 power-limited outputs reduce code compliance burden on each circuit.

Lifesafety Power · FPO150/250-2D8P2M8NLCE8N

Lifesafety Power FPO150/250-2D8P2M8NLCE8N 150W power supply 12A

Field-configurable power supply designed for multi-camera and access-control deployments where you need to run mixed 12V and 24V loads from a single

• Switchable 150W/250W rating adapts to deployment size without swapping chassis.
• Dual voltage rails (12V and 24V) eliminate a second PSU, saving BOM and cabinet space.
• Eight individually fused 3A Class 2 outputs isolate critical loads across two buses.