Lifesafety Power FPO150/250-2C8P2D8PE8M3 Dual-Output Power Supply with Lock & Auxiliary Control
Overview
The FPO150/250-2C8P2D8PE8M3 is a selectable dual-output power supply designed to feed both powered endpoints and access control infrastructure from a single chassis. You configure either 150W (12A @ 12V or 6A @ 24V) or 250W (20A @ 12V or 10A @ 24V) depending on your load—eliminating the need for separate supplies. The 16 relay lock control outputs (2.5A class 2 power-limited per channel) support fail-safe or fail-secure switching for door strikes and magnetic locks, each independently selectable. A second bank of 16 DC auxiliary outputs handles auxiliary circuits on one of two isolated buses, useful for signaling, status LEDs, or sensor distribution. The E8 form factor (36H × 30W × 4.5D inches) with 16-position DR Mercury back plate and door-mount kit fits standard electrical enclosures and cabinet installations.
Compatibility
This supply integrates into broader PoE switch and power infrastructure architectures supporting mixed loads—cameras, access readers, door controllers, and auxiliary systems. It works as a standalone unit or alongside existing Lifesafety Power components in multi-supply deployments. The dual 2.5A per-output design ensures each relay or auxiliary circuit remains independently rated, preventing cascade failure if a single load shorts.
Installation Notes
Each of the 16 relay outputs and 16 auxiliary outputs is independently configurable for Bus1 or Bus2 assignment (auxiliary only) and failsafe/failsecure mode (relays only). Class 2 power-limited design means wiring must comply with NEC class 2 conduit rules—no high-voltage mixing. The door-mount kit and DR Mercury back plate are included; verify your enclosure depth before installation to accommodate the 4.5-inch depth. Confirm voltage selection (12V or 24V primary output) matches your end devices before commissioning.
