IP Cameras

Sub categories

Showing Results for IP Cameras

Compare

Out of stock
ACTi

SKU: DSX-4326

ACTi DSX-4326 43" 4K LCD Display
- 3840×2160 4K UHD resolves faces and plates across multi-camera feeds on one 43" panel.
- 700 cd/m² brightness keeps feeds legible under fluorescent and mixed ambient lighting.
- 178° H/V viewing angles deliver consistent contrast for multiple operators simultaneously.
$1,259.00 $725.99 Save $533.01

Add to Cart
The item has been added
Free shipping over $499

$1,259.00 $725.99 Save $533.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: DSX-5526

ACTi DSX-5526 LCD Display 55-inch 4K
- 4K (3840×2160) resolution renders fine surveillance detail across a 55-inch panel.
- 6.5ms response time keeps fast-moving footage sharp during active monitoring.
- 60Hz refresh rate supports smooth multi-source display in command center deployments.
$1,619.00 $932.99 Save $686.01

Add to Cart
The item has been added
Free shipping over $499

$1,619.00 $932.99 Save $686.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: DSX-6526

ACTi DSX-6526 LCD Display 65-inch 4K
- Native 3840×2160 displays 2MP–5MP feeds side-by-side with zero scaling loss.
- 700 cd/m² brightness sustains legibility in ambient-lit control rooms 24/7.
- 178° viewing angles let multiple operators read feeds from any position.
$2,099.00 $1,211.99 Save $887.01

Add to Cart
The item has been added
Free shipping over $499

$2,099.00 $1,211.99 Save $887.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: DSX-7526

ACTi DSX-7526 LCD Display Monitor 75-Inch
- 4K 3840×2160 panel tiles 4–6 camera streams at full resolution without quality loss.
- 700 cd/m² brightness keeps feeds legible in partially lit SOC and command center rooms.
- HDMI/DisplayPort inputs integrate directly with Axis Camera Station, Milestone, and Pelco.
$2,729.00 $1,575.99 Save $1,153.01

Add to Cart
The item has been added
Free shipping over $499

$2,729.00 $1,575.99 Save $1,153.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: EPR8A700DV-MMS

ACTi DV 135IN & 163IN Motorized Height - EPR8A700DV-MMS
- Motorized height adjustment eliminates manual reconfiguration during multi-shift briefings.
- Supports 135–163 inch large-format LED displays via integrated VESA mounting interface.
- Floor-standing caster mobility enables rapid redeployment across control rooms and event spaces.
$4,619.00 $2,666.99 Save $1,952.01

Add to Cart
The item has been added
Free shipping over $499

$4,619.00 $2,666.99 Save $1,952.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: DV-135GO

ACTi DV-135GO Network Surveillance Component
- Surveillance accessory for ACTi network camera and NVR deployments
- Black housing matches standard ACTi surveillance install aesthetics
- NDAA-compliant for federal and government-procurement projects
$129,999.00 $73,447.99 Save $56,551.01

Add to Cart
The item has been added
Free shipping over $499

$129,999.00 $73,447.99 Save $56,551.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: DV-16324-PLUS

ACTi DV-16324-PLUS 163IN Direct View LED Wall Display
- Full HD 1920×1080 across 163 inches keeps multi-camera grids legible at 8–12 ft.
- 550 cd/m² brightness handles ambient fluorescent lighting without room blackout treatment.
- Native HDMI and LAN ports integrate directly into VMS and CCTV matrix switching infrastructure.
$60,319.00 $34,839.99 Save $25,479.01

Add to Cart
The item has been added
Free shipping over $499

$60,319.00 $34,839.99 Save $25,479.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: DV-18924-PLUS

ACTi DV-18924-PLUS 189IN Direct View LED Wall Display
- 189-inch single surface displays 16–32 camera feeds without tiled-array seams.
- 550 cd/m² brightness prevents washout under standard indoor fluorescent and LED lighting.
- 6000:1 dynamic contrast ratio retains shadow detail in low-light surveillance footage.
$76,769.00 $44,345.99 Save $32,423.01

Add to Cart
The item has been added
Free shipping over $499

$76,769.00 $44,345.99 Save $32,423.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: DV-21624-PLUS

ACTi DV-21624-PLUS 216IN Direct View LED Wall Display
- Native 1920×1080 resolution delivers sharp surveillance detail across a 216-inch surface.
- Seamless single-surface LED panel eliminates bezel gaps and alignment drift over time.
- HDMI, USB, and LAN connectivity supports integration into existing SOC infrastructure.
$93,219.00 $53,846.99 Save $39,372.01

Add to Cart
The item has been added
Free shipping over $499

$93,219.00 $53,846.99 Save $39,372.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: E11A

ACTi E11A 1MP Cube Basic WDR Security Camera
- 74 dB Basic WDR resolves detail in mixed-light scenes like backlit lobbies.
- Single PoE Class 2 (802.3af) cable delivers power and video—no separate PSU.
- CS-mount interchangeable lens and ONVIF Profile S/G/T/Q simplify field adjustments.
$330.00 $243.99 Save $86.01

Add to Cart
The item has been added
Free shipping over $499

$330.00 $243.99 Save $86.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: E13A

ACTi E13A 5MP Fixed Cube Camera with WDR and 2-Way Radio
- 5MP resolution with WDR handles mixed-light entrances and shadowed corridors cleanly.
- Built-in two-way audio eliminates separate intercom hardware at monitored entry points.
- Single 802.3af PoE cable powers and connects the camera—no separate power run needed.
$599.00 $442.99 Save $156.01

Add to Cart
The item has been added
Free shipping over $499

$599.00 $442.99 Save $156.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: E14

ACTi E14 10MP
- 10MP (3648×2736) sensor resolves facial detail at 15–20 ft in office corridors.
- WDR and DNR handle backlit scenes and low-light zones without extra lighting.
- ONVIF-compliant cube housing mounts to ceiling or wall for fast VMS integration.
$585.00 $432.99 Save $152.01

Add to Cart
The item has been added
Free shipping over $499

$585.00 $432.99 Save $152.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: E16

ACTi E16 10MP Fisheye Cube Camera
- 10MP fisheye lens delivers full-room coverage from a single ceiling mount point.
- Single 802.3af PoE cable (13W max) powers the camera—no separate electrical run needed.
- ONVIF Profile S compliance ensures drop-in integration with Milestone, Axis, and other VMS.
$602.00 $445.99 Save $156.01

Add to Cart
The item has been added
Free shipping over $499

$602.00 $445.99 Save $156.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: E19

ACTi E19 5MP Cube Camera with Extreme WDR
- 5MP resolution with Extreme WDR handles high-contrast lobbies and backlit scenes.
- Single 802.3af PoE run powers the camera and carries video—no separate PSU needed.
- H.265/H.264 compression and ONVIF/RTSP output integrate with any standard VMS.
$627.00 $463.99 Save $163.01

Add to Cart
The item has been added
Free shipping over $499

$627.00 $463.99 Save $163.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: E217

ACTi E217 2MP Box Camera Day/Night Advanced WDR
- 1080p/60fps with Advanced WDR handles backlit windows and bright storefronts cleanly.
- PoE 802.3af under 13W simplifies multi-camera power budgeting on standard switches.
- H.265 compression cuts bitrate 40–60%, reducing storage and bandwidth costs at scale.
$749.00 $553.99 Save $195.01

Add to Cart
The item has been added
Free shipping over $499

$749.00 $553.99 Save $195.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: E222

ACTi E222 2MP Box Camera Day/Night WDR PoE
- 1920×1080 resolution supports facial recognition at 8–10 ft without external lighting.
- Advanced WDR handles mixed sunlight and shadow in a single frame, no blown exposures.
- 802.3af PoE draws under 13W — no dedicated electrical circuit required at the camera.
$641.00 $473.99 Save $167.01

Add to Cart
The item has been added
Free shipping over $499

$641.00 $473.99 Save $167.01

Add to quote Compare

What to Look For When Buying

The six decisions that matter most before you spec.

Form Factor by Scene

Bullet cameras signal deterrence and reach long distances; domes blend into architecture and resist tampering; turrets split the difference with clean IR without dome-ball reflection. Panoramic 360° replaces 3-4 fixed cameras in open interiors. Match form factor to scene geometry, not aesthetic preference. See our coverage engineering guide for scene-planning methodology.

Pixel Density Over Megapixels

A 4K camera set 80 feet back delivers worse identification imagery than a 2MP camera at 30 feet. PPF (pixels per foot) on the target — not raw resolution — is what determines recognition vs. identification grade coverage. Our DORI pixel density guide covers the math for every common scene.

NDAA Section 889 Compliance

Federal, state, and critical-infrastructure procurement excludes Hikvision, Dahua, and their OEM-rebranded subsidiaries. Axis, Hanwha Vision, i-PRO, Pelco, Digital Watchdog, Vivotek, and Bosch are all NDAA-compliant. Specify compliance in RFPs — it cannot be retrofitted into a deployment after-the-fact.

Edge AI & Analytics

Modern IP cameras run object classification, line-crossing detection, loitering, and people counting on the camera itself — filtering false alarms before they reach the NVR. Axis Object Analytics, Hanwha Wisenet 7 AI, i-PRO Scene Analytics, and Hikvision AcuSense all run on-camera. Proper scene setup matters as much as the algorithm.

PoE Power Budget

Peak draw for outdoor cameras with heaters + IR can hit 25W+; PTZ models can demand 60-90W (PoE++). A 24-port switch with 370W total budget can't actually run 24 PTZs. Plan switch power for simultaneous peak — see PoE budget planning and why your PoE switch fails after 18 cameras.

Storage & Retention Math

H.265 cuts bitrate 40-50% versus H.264 at equivalent quality; smart codecs drop further during static scenes. 30-day retention on 4K across 32 cameras is very different math than 30-day on 2MP H.265. Use our retention math guide before sizing your NVR or storage array.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

ONVIF Profile S + G + T

Industry standard for IP camera interoperability. Profile S = live streaming, G = recording/playback, T = advanced streaming (H.265 + analytics metadata). Certified conformance — not vague "ONVIF compatible" language — is what guarantees cross-VMS interoperability. Check spec sheets for profile-level certification.

DORI Classification

IEC 62676-4 defines four detection distances: Detect (25 PPF), Observe (63 PPF), Recognize (125 PPF), Identify (250 PPF). Most forensic-grade IP camera deployments need Recognize or Identify at the scene's farthest point — which drives lens selection and mounting distance calculations.

H.265 + Smart Compression

Modern codec with 40-50% lower bitrate than H.264 at equivalent perceived quality. Smart Stream / Zipstream / WiseStream variants drop bitrate further by identifying static scene regions. Matters most for multi-month retention at scale — storage savings compound.

Wide Dynamic Range (WDR)

Scene lighting ratio handled simultaneously. Entry-level 120dB, premium 150dB. Matters most at doorways, loading docks, and glass-heavy entries where interior shadow meets exterior sunlight. Hanwha Wisenet 7 and Axis Forensic WDR flagship at 150dB+.

PoE+ / PoE++ (802.3at / 802.3bt)

802.3at delivers 25.5W/port — sufficient for most outdoor cameras with heater + IR. 802.3bt (Type 3 = 60W, Type 4 = 90W) powers PTZs, multi-sensor, and heated-housing cameras. See PoE injectors for single-port solutions.

Edge Storage + Failover

SD card slots on modern IP cameras provide local failover recording when network or NVR drops. Not a primary-storage solution — but essential for high-availability deployments. Industrial-grade SD cards (not consumer) required; typical 256GB to 1TB.

Typical Deployment Scenarios

Multi-Site Retail Chain

Mixed deployment: 180° panoramic at POS/entry, bullet cameras at back-of-house and dock, domes at stockroom and offices. Centralized VMS with per-site NVR or cloud hybrid. Analytics for people-counting and dwell-time. Typical 12-24 cameras per site, 30-60 day retention.

Corporate Campus

Outdoor bullets + PTZs at perimeter and parking structures; indoor domes at main lobbies, elevator banks, server rooms, and loading bays; multi-sensor at atriums. Integration with access control for door-forced-open and tailgating event overlays.

Industrial & Warehouse

Long-range bullets at loading docks and fence-line, thermal at fuel-storage perimeter, panoramic cameras in high-bay for wide-coverage single-camera monitoring. Heavy use of on-camera analytics for forklift-zone intrusion detection. See warehouse surveillance.

Municipal & Critical Infrastructure

NDAA-mandatory deployments: Axis, Hanwha, i-PRO only. Thermal + visible dual-sensor at perimeter; PTZ with radar-slewing at large-area monitoring; LPR at ingress/egress points. FIPS 140-2 encryption, TLS 1.3 streaming, integration with emergency communications.

Frequently Asked Questions

What's the difference between an IP camera and an analog camera?

IP cameras connect over Ethernet, deliver native-digital HD/4K resolution, run on-camera analytics, and integrate with software-based VMS platforms. Analog cameras use coax and require encoder/DVR hardware to reach network resolution beyond 1080p. For new deployments, IP is the standard — analog exists only for retrofit use cases where coax already runs.

Which IP camera brands are NDAA compliant?

Axis, Hanwha Vision, i-PRO, Pelco, Digital Watchdog, Vivotek, and Bosch are all NDAA-compliant. Hikvision and Dahua are restricted under Section 889 for federal, state government, and critical-infrastructure procurement but remain available for commercial deployments.

How do I choose the right resolution for an IP camera?

Start with the farthest point of the scene you need to identify. Calculate required PPF (pixels-per-foot) on that target: 125 PPF for recognition, 250 PPF for identification. Work backward from PPF and sensor size to resolution and lens focal length. A 2MP camera with the right lens often outperforms a 4K camera with the wrong one — see our DORI guide.

What PoE standard do modern IP cameras require?

Fixed indoor cameras run on standard 802.3af PoE (15.4W). Outdoor cameras with heaters and IR need PoE+ (802.3at, 25.5W). PTZ, multi-sensor, and heated-housing cameras need PoE++ (802.3bt, 60-90W). Plan switch power budget for simultaneous-peak load, not nameplate ratings — see why PoE switches fail at scale.

Can I mix IP camera brands in one VMS?

Yes — any ONVIF Profile S + G certified cameras work with any certified VMS. Milestone XProtect, Genetec Security Center, Avigilon ACC, and Exacq routinely mix Axis, Hanwha, i-PRO, and Hikvision cameras on one server. Note: vendor-specific analytics metadata (Axis Object Analytics, Hanwha AI, etc.) may require that vendor's VMS or a VMS with explicit integration.

How many cameras can a typical NVR support?

Channel count is only one dimension — total bitrate is the real constraint. A 32-channel NVR rated for 320 Mbps can't run 32 4K cameras at 8 Mbps each (that's 256 Mbps, leaving almost no headroom). For high-resolution deployments, size by aggregate bitrate first, channel count second. See retention math for sizing methodology and our NVR catalog.

Sub categories

Showing Results for IP Cameras

Choosing a camera? Watch this first.

Plan Your Deployment

Build a Complete System

Recorders for these cameras

Surveillance storage drives

Network switches

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading