Network Switches
Sub categories
Showing Results for Network Switches
-
Geovision
SKU: GV-APOE0811
Geovision GV-APOE0811 8-Port PoE+ Switch
8-port PoE+ gigabit switch for IP cameras and networked security devices
- 8 gigabit PoE+ ports deliver 802.3at power, eliminating separate injectors per device.
- 2 dedicated gigabit uplinks enable clean backbone aggregation and direct NVR integration.
- Managed architecture supports VLAN, QoS, and port mirroring for segmented security networks.
$387.00 $279.99 Save $107.01The item has been added -
Geovision
SKU: GV-APOE0811-140
Geovision GV-APOE0811 8-Port PoE+ Switch
8-port PoE+ switch with gigabit uplinks for IP camera deployments
- All 8 ports deliver 802.3at PoE+ power, eliminating separate injectors for PTZ cameras.
- 140W total power budget supports simultaneous operation of multiple high-draw IP devices.
- Two dedicated gigabit uplinks provide clean backhaul separation to NVRs or core switches.
$410.00 $285.99 Save $124.01The item has been added -
Geovision
SKU: 84-POE0400-001U
Geovision GV-POE0400 4 Port POE Switch - 84-POE0400-001U
- Delivers 802.3at PoE+ across 4 ports to power cameras up to 17W each.
- 70W shared power budget supports small surveillance zones on a single switch.
- Plug-and-play with any ONVIF-compliant camera over standard Cat5e or Cat6.
$158.00 $101.99 Save $56.01The item has been added -
Geovision
SKU: GV-POE0811
Geovision GV-POE0811 8-Port Managed PoE+ Switch
8-port gigabit managed switch with PoE+ power on all ports
- All 8 gigabit ports deliver simultaneous PoE+ (802.3at) up to 30W each.
- Managed VLAN and per-port QoS isolate surveillance traffic on shared networks.
- 1000 Mbps per-port throughput sustains multiple concurrent 4K camera streams.
$331.00 $208.99 Save $122.01The item has been added -
Allied Telesis
SKU: AT-GS970M/10PS-R-10
Hanwha AT-GS970M/10PS-R-10 8-Port PoE+ Switch
8-port PoE+ switch with 124W budget for IP camera deployments
- 8× Gigabit PoE+ ports (15W each) plus 2× SFP uplinks for fiber or copper
- 20Gbps switching fabric, 14.9Mpps throughput, non-blocking across all ports
- Fanless design runs silent at 33 dB in compact 210×275×42.5mm chassis
$972.00 $553.99 Save $418.01The item has been added -
Allied Telesis
SKU: AT-GS970M/18PS-R-10
Hanwha AT-GS970M/18PS-R-10 16-Port PoE+ Switch
16-port PoE+ switch with 247W budget for surveillance and access points
- 247W total PoE+ power supports 16 devices at 15W or 8 at full 30W each
- 36 Gbps switching fabric with 26.8 Mpps forwarding rate for low-latency performance
- Dual SFP fiber uplink ports for redundant long-distance trunk connections
$1,290.00 $840.99 Save $449.01The item has been added -
Allied Telesis
SKU: AT-GS970M/28PS-10
Hanwha AT-GS970M/28PS-10 24-Port PoE+ Switch
24-port PoE+ switch with 370W budget for IP cameras and access control
- 24 Gigabit PoE+ ports at 370W total—runs 24 devices @ 15W or 12 @ 30W
- 56 Gbps switching fabric, 41.7 Mpps forwarding for non-blocking line-rate
- 1U rackmount (440×290×44mm), 33 dBA quiet, 520W max power consumption
$1,700.00 $1,107.99 Save $592.01The item has been added -
Allied Telesis
SKU: AT-GS980M/52PS-10
Hanwha AT-GS980M/52PS-10 48-Port Gigabit PoE+ Switch
48-port Gigabit PoE+ switch with 740W power for enterprise surveillance
- 48 x Gigabit PoE+ ports deliver 15W per port or 30W on 24 ports
- 104Gbps switching fabric with 77.4Mpps throughput for low-latency performance
- Four SFP uplink ports and managed VLAN/QoS in compact 1RU rack form
$3,000.00 $1,954.99 Save $1,045.01The item has been added -
Allied Telesis
SKU: AT-IE220-10GHX-980
Hanwha AT-IE220-10GHX-980 Industrial PoE++ Switch
Compact fanless PoE++ switch with 240W budget for industrial edge
- 8 × Gigabit PoE ports (2 × PoE++ up to 90W, 8 × PoE+ 30W)
- Dual 1/10G SFP+ uplinks with 56Gbps switching fabric
- DIN rail, 37–57V DC input, 18.5W max draw, IP30 rated
$1,618.00 $1,223.99 Save $394.01The item has been added -
Allied Telesis
SKU: AT-IE220-6GHX-980
Hanwha AT-IE220-6GHX-980 Industrial PoE++ Switch
Industrial 6-port PoE++ switch with 180W budget for distributed camera systems
- 2x PoE++ (90W) + 4x PoE+ (30W) ports support PTZ cameras and thermal sensors
- 48 Gbps switching fabric with 2x 10G SFP+ uplinks for backbone connectivity
- Fanless aluminum chassis, IP30 rated, 37–57V DC input on compact DIN rail mount
$1,040.00 $862.99 Save $177.01The item has been added -
Allied Telesis
SKU: AT-IE340-12GP-980
Hanwha AT-IE340-12GP-980 Industrial PoE++ Switch
8-port PoE++ industrial switch with 240W power budget and SFP uplinks
- 8 × Gigabit PoE++ ports deliver 30W each; 4 × SFP uplinks for fiber reach
- 24 Gbps switching fabric with 17.8 Mpps throughput; fanless aluminum design
- Wide 18–57V DC input; IP30 rated; DIN rail mount in 91×139×153 mm footprint
$1,888.00 $1,540.99 Save $347.01The item has been added -
Allied Telesis
SKU: AT-IE340-20GP-980
Hanwha AT-IE340-20GP-980 16-Port PoE++ Switch
16-port PoE++ industrial switch with 240W budget and fanless DIN rail design
- 16 Gigabit PoE++ ports deliver up to 240W total across mixed 15W/30W devices
- 40Gbps switching fabric with 29.7Mpps throughput handles high-density surveillance
- Fanless aluminum enclosure, IP30-rated, mounts DIN rail in compact 91×139×153mm footprint
$2,928.00 $2,655.99 Save $272.01The item has been added -
Allied Telesis
SKU: AT-x530DP-28GHXm-10
Hanwha AT-x530DP-28GHXm-10 Managed PoE++ Switch
1480W PoE++ managed switch for high-density IP camera deployments
- 20 Gigabit PoE++ ports plus 4 adaptive 1/2.5/5G ports for mixed devices
- Four 10GB SFP+ uplinks for backbone connectivity and high-speed aggregation
- Dual hot-swap redundant PSUs with managed VLAN support and ring topology
$6,700.00 $4,657.99 Save $2,042.01The item has been added -
Allied Telesis
SKU: AT-x530L-10GHXm-10
Hanwha AT-x530L-10GHXm-10 8-Port PoE++ Switch
8-port PoE++ switch with 10G uplinks for surveillance and enterprise networks
- 500W PoE power budget with up to 90W per port across 8 variable-speed ports
- 120 Gbps switching fabric, 89.2 Mpps throughput, 2.12 µs latency at 10 Gbps
- Dual 10G SFP+ uplinks plus stacking ports in compact 1U rack-mount form factor
$3,661.00 $3,382.99 Save $278.01The item has been added -
Allied Telesis
SKU: AT-x530L-18GHXm-10
Hanwha AT-x530L-18GHXm-10 16-Port PoE++ Switch
16-port PoE++ switch with 720W budget for security and IoT
- 16 multi-gigabit PoE++ ports deliver up to 90W per port with flexible configurations
- 200 Gbps switching fabric handles wire-speed performance across all ports
- Dual 10G SFP+ uplinks and stacking ports for redundancy and unified management
$4,805.00 $4,438.99 Save $366.01The item has been added -
Allied Telesis
SKU: AT-X530L-18GHXM-90
Hanwha AT-X530L-18GHXM-90 PoE++ Managed Switch
16-port PoE++ managed switch with 720W for security cameras
- 16-port managed switch with 1/2.5/5 Gigabit PoE++ uplink
- NDAA + TAA compliant for federal and security deployments
- Supports high-power and high-bandwidth devices per port
$5,775.00 $5,276.99 Save $498.01The item has been added
Network Switches
Network switches form the backbone of commercial IP surveillance and access control deployments. Select managed or unmanaged switches based on bandwidth, PoE requirements, segmentation needs, and long-term scalability.
Plan Your Deployment
- PoE budget planning and total wattage capacity
- Managed vs unmanaged configuration needs
- Uplink speed and fiber/SFP requirements
- VLAN segmentation and network security planning
- Rackmount vs wall-mount installation considerations
Network Switches — Engineering-Grade Network Infrastructure for Commercial Deployments
This category covers 209 working models of network switches sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Port count and PoE budget come first. An 8-camera install needs at least 9 ports (cameras + uplink), with PoE budget covering the sum of per-camera PoE class. Account for uplink speed: 1 Gbps uplinks bottleneck under heavy video load on switches with 8+ high-resolution cameras. SFP+ or 10 Gbps uplinks remove that bottleneck on growing sites.
Managed versus unmanaged switches affect troubleshooting and VLAN segmentation. Managed switches (HPE Aruba, Cisco, Netgear ProSAFE M-series) support VLANs, link-aggregation, port mirroring, and SNMP monitoring — essential for any deployment over 16 cameras or with mixed traffic. Unmanaged switches work for small isolated camera networks but limit growth and troubleshooting visibility.
Layer 3 capability (routing, VLAN inter-VLAN routing) becomes important when surveillance, access control, and corporate traffic share the same physical network. Surveillance VLAN isolation is now standard practice — segregate camera traffic from corporate Wi-Fi and guest networks to prevent broadcast storms and lateral attack paths. Confirm the switch supports the VLAN count and ACL complexity you need.
Outdoor/industrial deployments need ruggedized switches. ComNet, Antaira, and Moxa make hardened switches rated for -40°C to +75°C, vibration, and waterproof housings. DIN-rail mounting fits standard outdoor enclosures. Standard data-closet switches in outdoor enclosures fail within 1-2 years from condensation and temperature swings; spec the right environment rating up front.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, Thermal, 8MP, 2MP |
| Connectivity | Wired, WiFi + Wired |
| Power | PoE+, PoE++, PoE, AC/DC, DC |
| Channels | 45-Port |
| Type | Switch, Industrial, Media Converter, Wiegand to OSDP Converter, Power Supply, Cable, Adapter, Router |
| Durability | Indoor, Outdoor |
Top Brands in This Category
Frequently Asked Questions
What's the difference between managed and unmanaged PoE switches?
Unmanaged switches power-on and forward traffic without configuration — simplest deployment but no VLAN, no monitoring, no troubleshooting visibility. Managed switches add VLANs, link-aggregation, port mirroring, SNMP, and remote-management interfaces. For deployments above 16 cameras or those sharing infrastructure with other systems, managed is the right choice; the per-port cost is modest and the operational benefit is large.
How much PoE budget should I size for?
Sum the PoE-class budget of all PoE-powered devices, then add 20-30% headroom for growth. Eight 802.3at cameras at 30W max each is 240W minimum — but a 130W-budget 8-port PoE+ switch can't deliver that. Confirm both per-port budget and total PoE budget; many entry-level switches advertise PoE+ ports but cap aggregate budget at half the per-port maximum.
Do I need 10 Gbps uplinks?
For installations under 32 cameras with mid-resolution streams, 1 Gbps uplinks suffice. Above that, or when you need fast investigative playback for many simultaneous reviewers, 10 Gbps (SFP+) uplinks remove the choke point. NVRs writing to NAS over the network also benefit. SFP+ has become reasonably affordable on managed switches; opt for it on new installs over 16 cameras.
Can I run VoIP and video on the same switch?
Yes — modern managed switches use VLAN segregation to keep VoIP, video, and data traffic separated even on shared physical ports. Use QoS (Quality of Service) to prioritize VoIP for low latency and assign video its own queue. Avoid mixing untagged traffic types on a single switch port without VLAN configuration; broadcast storms and bandwidth competition cause both voice and video quality issues.
What's the right uplink between buildings on a campus?
Single-mode fiber for runs over 100 m, multi-mode for shorter runs (typically up to 550 m on OM3, 300 m on OM4 at 10 Gbps). Bidirectional SFPs (single fiber instead of pair) save fiber count when the run is already deployed. Avoid copper between buildings — ground-potential differences during lightning strikes destroy switch SFP modules even when surge-protected.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.