DMP products
-
DMP
SKU: PP-6005B
DMP PP-6005B Proxpoint Plus Proximity Reader
Wired proximity reader for DMP panels; reads 26-bit and 35-bit cards
- Reads 26-bit and 35-bit proximity cards, supporting mixed credential deployments.
- Supervised loop wiring ties directly to DMP 734, 7073/7073A, 7173, and 7873 panels.
- 4.75–16VDC tolerance and weatherized enclosure suit covered exterior door installations.
$283.11 $216.99 Save $66.12The item has been added -
DMP
SKU: P2S-001
DMP P2S-001 High Security Single Zone Magnetic Sensor
Single zone magnetic sensor for door/window monitoring with HID integration
- Single-zone magnetic detection simplifies per-door/window wiring in multi-zone panels.
- HID credential integration correlates door contact events with cardholder access logs.
- Intrusion/contacts cable category ensures signal compatibility with standard detection circuits.
$628.17 $473.99 Save $154.18The item has been added -
DMP
SKU: P-640-H-A
DMP P-640-H-A Patagonia Proximity Reader with Keypad
Dual-credential proximity and keypad reader for DMP access control
- Accepts proximity cards, proximity tags, and PIN codes for flexible credential deployment.
- Wired connection to DMP panels enables real-time credential verification without network dependency.
- Single faceplate houses both 125 kHz proximity reader and keypad, simplifying door hardware.
$627.91 $298.99 Save $328.92The item has been added -
DMP
SKU: P-500-H-A
DMP P-500-H-A Alps Proximity Reader
TCP/IP proximity card reader for distributed door-level access control
- 8-inch read range handles high-traffic turnstiles without precise card positioning.
- 5–16V input tolerance integrates with existing DMP keypads and control nodes.
- Metal-surface mounting maintains full read range on steel door frames and enclosures.
$334.47 $158.99 Save $175.48The item has been added -
DMP
SKU: OP-08CB
DMP OP-08CB Motion Detector
Wired ceiling motion detector for door and window zone monitoring
- Dual 12/24 VDC operation eliminates hardware swaps across XT and XR Series panels.
- Two-conductor wired zone input integrates directly—no adapters or gateways required.
- Fail-safe or fail-secure relay output supports egress code compliance on power loss.
$196.00 $103.99 Save $92.01The item has been added -
DMP
SKU: ET25-7WS
DMP ET25-7WS Multi-Technology Access Control Reader
Compact multi-technology reader with OSDP & Wiegand for mixed credentials
- Supports both OSDP and Wiegand, enabling use with legacy and modern panels.
- 5.1" x 3.25" x 0.71" form factor fits standard door frames without modification.
- Multi-technology credential support reduces hardware count in mixed-format deployments.
$699.00 $627.99 Save $71.01The item has been added -
DMP
SKU: ET20-7WS
DMP ET20-7WS Multi-Technology Access Control Reader
Dual-credential reader for NFC and 125kHz cards in compact form
- Reads both NFC/13.56MHz and 125kHz prox cards, eliminating separate readers per door.
- OSDP support enables encrypted two-way comms, reducing credential cloning exposure.
- Wiegand output ensures drop-in compatibility with legacy and modern access panels.
$490.00 $439.99 Save $50.01The item has been added -
DMP
SKU: ET10-7WS
DMP ET10-7WS Multi-Technology Access Control Reader
Wired multi-technology reader for mixed-credential access control
- Multi-technology credential support reduces hardware SKUs in mixed or retrofit deployments.
- Wired connection delivers deterministic, RF-interference-free communication to the access panel.
- Compact 5.1" × 1.7" × 0.71" body fits narrow mullions and constrained door-frame cutouts.
$528.00 $372.99 Save $155.01The item has been added -
DMP
SKU: ES502
DMP ES502 Transformer Enclosure
Isolated transformer housing for DMP control panel systems
- Vented metal housing protects transformers 20 VA and above from dust and accidental contact.
- Compact 4.25" × 5.625" × 3.75" footprint integrates into standard DMP control panel layouts.
- Hinged cover enables fast one-handed transformer access for maintenance in wall-mount installs.
$110.30 $70.99 Save $39.31The item has been added -
DMP
SKU: ES501
DMP ES501 Plug-In Transformer Enclosure
Compact transformer enclosure for DMP NFC/13.56MHz access control
- Hinged metal cover with built-in venting protects transformers while dissipating heat.
- Compact 4.25″×5.625″×2.5″ footprint consolidates transformer power at the control panel.
- Supports low-voltage transformers rated over 20 VA for DMP access control installations.
$93.20 $83.99 Save $9.21The item has been added -
DMP
SKU: CSM-2P
DMP CSM-2P MIFARE DESFire EV2 Smart Card
MIFARE DESFire EV2 contactless smart card with 128-bit AES encryption
- 128-bit AES encryption blocks credential cloning and eavesdropping attacks.
- 13.56 MHz ISO 14443-A protocol integrates with HID, Salto, and Axis readers.
- Standard CR80 card dimensions (2.1"×3.4"×0.03") fit existing badge holders.
$5.99The item has been added -
DMP
SKU: CSK-2
DMP CSK-2 MIFARE DESFire EV2 Keyfob Credential
13.56 MHz contactless keyfob with MIFARE DESFire EV2 encryption
- DESFire EV2 encryption enables dynamic credential reissuance without hardware replacement.
- ISO 14443-A at 13.56 MHz ensures compatibility with all DESFire EV2-certified readers.
- Keyfob form factor attaches to key rings, reducing credential loss risk in daily use.
$6.99The item has been added -
DMP
SKU: CMC-2
DMP CMC-2 Conekt Bluetooth Mobile Credential
Bluetooth mobile credential reader for DMP wireless access control
- BLE-based authentication eliminates physical card issuance and reduces lost-credential overhead.
- MIFARE DESFire EV1 encryption prevents credential cloning for compliance-sensitive deployments.
- Integrates natively with DMP Conekt panels; no third-party API gateway or VMS required.
$7.99The item has been added -
DMP
SKU: CM-30E
DMP CM-30E Push to Exit Button
24VDC networked push-to-exit button for DMP access control
- Accepts 12 or 24 VDC supply, matching either DMP XT or XR Series panel output.
- SPDT contacts support NO or NC wiring to meet your panel's fail-safe configuration.
- Single-gang stainless faceplate fits standard electrical boxes; consumes one zone input.
$117.00 $59.99 Save $57.01The item has been added -
DMP
SKU: AP2-20N
DMP AP2-20N Curtain PIR Motion Detector
Curtain PIR motion detector for doorways, windows, and perimeter zones
- Vertical curtain pattern limits coverage to doorways and windows, cutting lateral false alarms.
- Hardwired zone-loop connection eliminates battery maintenance and wireless mesh overhead.
- Native DMP panel integration supports unified hardwired architecture with contacts and keypads.
$82.00 $63.99 Save $18.01The item has been added -
DMP
SKU: 893A
DMP 893A Dual Phone Line Module Keypad
Dual phone line keypad module for DMP access control expansion
- Monitors main and backup phone lines for voltage drops, alerting local keypads and central station.
- UL 864 listed and FCC Part 15/68 compliant, meeting fire signaling and telecom regulatory requirements.
- Installs into DMP panel enclosure at 12VDC via wire harness, fitting existing auxiliary expansion slots.
$169.00 $150.99 Save $18.01The item has been added -
DMP
SKU: 869
DMP 869 Style D Initiating Module
25VDC initiating module expands DMP security system zones
- Two independent supervised 4-wire initiating circuits expand DMP panel zone capacity.
- 8–25 VDC operating range integrates directly with standard DMP power distribution.
- Continuous ground-fault supervision detects wiring opens, shorts, and faults pre-alarm.
$122.00 $61.99 Save $60.01The item has been added -
DMP
SKU: 867
DMP 867 LX-Bus Addressable Notification Module
LX-Bus addressable notification module for networked multi-site control
- Style W supervised circuit supports 12VDC or 24VDC notification loads on one module.
- Built-in ground fault, open, and short detection with four status LEDs prevents silent failures.
- LX-Bus TCP/IP backbone enables centralized notification control across distributed multi-site deployments.
$193.00 $98.99 Save $94.01The item has been added -
DMP
SKU: 865
DMP 865 Style W/X Notification Module
TCP/IP notification module for DMP control panel auxiliary expansion
- TCP/IP integration eliminates dedicated serial runs in DMP control panel networks.
- Monitors opens, shorts, and ground faults on notification circuits in real time.
- Operates at 9.6–14.2 VDC, compatible with panel-mounted or remote 24VDC supplies.
$10.99The item has been added -
DMP
SKU: 861
DMP 861 Power Distribution/4 Wire Bus Module
Centralized power & 4-wire bus module for multi-keypad access systems
- 4-wire bus connectivity synchronizes multiple keypads and readers from one module.
- Centralized 12V/24V DC power distribution eliminates distributed point-of-load supplies.
- Compact form factor mounts in existing DMP cabinets with no separate power supply needed.
$65.00 $33.99 Save $31.01The item has been added
