Showing Results for Access Control
-
Save $0.01
Kantech KTES-SPEAK Wall/Ceiling/Pendant Speaker
Two-way speaker with mic for Kantech access control systems
- Speaker with microphone for two-way audio at the door
- Wall, ceiling, or pendant mount for any install profile
- Integrates with Kantech access control platforms
Free shipping over $499$81.00 $80.99 Save $0.01 -
Save $1,774.01
Kantech KTES-US Telephone Entry System 250 Tenants
Telephone entry for 250–3,000 tenants without per-unit hardware
- Telephone entry system for up to 250 tenants
- Tenants answer calls on existing phone lines to admit
- Proximity + keypad + Wiegand for credentialed entry
Free shipping over $499$4,859.00 $3,084.99 Save $1,774.01 -
Save $111.01
Kantech KTP/103SN Vandal-Resistant Keypad
26-bit Wiegand keypad built for outdoor high-security access points
- Vandal-resistant keypad for high-security entries
- 26-bit Wiegand output for enterprise panel integration
- Outdoor-rated construction resists tampering and impact
Free shipping over $499$535.00 $423.99 Save $111.01 -
Save $459.01
Kantech LCIN10082278BIPSBLNNJ26D 8MP Wall Camera
8MP wall camera with PoE power and 850nm night vision for 24/7 surveillance
- 64-door capacity from a single Aperio wireless controller
- NFC and BLE credentials via mobile phone authentication
- Reduces wired reader runs across multi-floor deployments
Free shipping over $499$2,200.00 $1,740.99 Save $459.01 -
Save $0.92
Add to Cart The item has been addedKantech MFP-2KDYE MIFARE Plus 2K Printable Smart Card
Dual-interface MIFARE Plus 2K smart card with full-color printing
- MIFARE Plus 2K printable smart card, AES-128 encryption
- Dye-sublimation printable surface for badge branding
- Tamper-resistant memory blocks credential duplication
Free shipping over $499$8.91 $7.99 Save $0.92 -
Save $1.82
Kantech MFP-2KDYE-COM Dye Sublimation Composite Card 40/60
Dye-sublimation composite card with 40/60 polyester blend for fade-resistant credentials
- Dye-sub composite card with 40/60 polyester blend
- Extended fade and moisture resistance vs pure PVC
- Multi-tech credential platform: DESFire, MIFARE, HID, NFC
Free shipping over $499$9.81 $7.99 Save $1.82 -
Save $4.17
Add to Cart The item has been addedKantech MFP-2KKEY ioSmart MIFARE Plus 2K Keytag
Encrypted keytag credential for Kantech ioSmart access control
- MIFARE Plus 2K keytag, 2,048 bytes user memory
- Stores multi-site facility access permissions
- Single credential serves multi-site deployments
Free shipping over $499$12.16 $7.99 Save $4.17 -
Save $2.92
Add to Cart The item has been addedKantech MFP-2KSHL ioSmart Clamshell Card
MIFARE Plus 2K clamshell card for Kantech ioSmart access control
- MIFARE Plus 2K clamshell card with AES-256 encryption
- Anti-cloning cryptography for high-security facilities
- Hinged plastic shell protects embedded antenna
Free shipping over $499$8.91 $5.99 Save $2.92 -
Save $9.01
Add to Cart The item has been addedKantech MFP-2KWLS2 ioSmart 2-Button Wireless Transmitter
Wireless 2-button transmitter for ioSmart access control without hardwire
- ioSmart 2-button handheld wireless transmitter
- Wireless credential for vehicles, gates, and remote entry
- Pairs with Kantech ioSmart wireless readers
In stock · Ships same business day Free shipping over $499$45.00 $35.99 Save $9.01 -
Save $9.01
Add to Cart The item has been addedKantech MFP-2KWLS4 ioSmart 2-Button Wireless Transmitter
2-button wireless transmitter for ioSmart access control without hardwired infrastructure
- ioSmart 2-button wireless transmitter for handheld access
- Wireless credential for parking gates and remote entry
- Pairs with Kantech ioSmart wireless readers
In stock · Ships same business day Free shipping over $499$45.00 $35.99 Save $9.01 -
Save $9.01
Kantech MFP-4KKEY2-BK ioSmart Keytag Black
ioSmart keytag with 4K Mifare Plus EV2 for enterprise access control
- ioSmart keytag with Mifare Plus EV2 4K secure encryption
- Multi-technology credential for legacy + modern reader systems
- Compact black keytag form factor
Free shipping over $499$20.00 $10.99 Save $9.01 -
Save $9.01
Kantech MFP-4KKEY3-BK ioSmart Keytag
Mifare Plus EV2 4K keytag with black leather housing for ioSmart access control
- ioSmart keytag credential with MIFARE + NFC + 125 kHz Prox
- AES-128 encrypted multi-tech for high-security access
- Compact keytag form factor for fobs and visitor passes
Free shipping over $499$20.00 $10.99 Save $9.01 -
Save $2.01
Kantech MFP-4KTAG ioSmart Self-Adhesive RFID Tag
Self-adhesive RFID tag with 4K memory and Mifare Plus Ev2 security
- ioSmart self-adhesive RFID tag with Mifare Plus EV2 security
- 4K memory for credential + visitor + asset tracking workflows
- Adhesive backing for badge-less or asset-tagging applications
Free shipping over $499$8.00 $5.99 Save $2.01 -
Save $2.01
Kantech MFP-4KWBL-BK ioSmart WristBand Mifare Plus EV2 4K
Encrypted 4K wristband credential for Kantech ioSmart access control
- MIFARE Plus EV2 4K wristband with AES-128 encryption
- 195mm elastomer band fits adult and child wrists
- FIPS 140-2 grade cryptography blocks cloning
Free shipping over $499$10.00 $7.99 Save $2.01 -
Save $2.01
Kantech MFP-4KWBL-DB ioSmart WristBand Credential
Dark blue wristband credential with Mifare Plus EV2 4K for ioSmart systems
- Waterproof wristband credential for ioSmart access control systems
- Tamper-evident design for visitor and event credentialing
- Compatible with Kantech ioSmart readers for secure entry
Free shipping over $499$10.00 $7.99 Save $2.01 -
Save $2.01
Kantech MFP-4KWBS-DB ioSmart Mifare Plus Wristband
Mifare Plus EV2 4K wristband for access control & employee badging
- MIFARE Plus EV2 4K wristband, 180mm dark blue
- Compatible with Kantech ioSmart access control
- Medium size fits most adult wrists comfortably
Free shipping over $499$10.00 $7.99 Save $2.01 -
Save $5.01
Kantech Multi-Technology Reader Spacer Black
Precision mounting spacer for Kantech multi-technology readers
- Multi-tech reader spacer supports all Kantech credentials
- DESFire, iCLASS, MIFARE, HID, NFC, 125kHz prox
- Single spacer works across all P345 reader variants
Free shipping over $499$28.00 $22.99 Save $5.01 -
Save $118.01
Kantech NCC-CAB-G2 Embedded Network Communications Controller
Gen 2 network controller for 20-door multi-facility access control
- Gen 2 embedded TCP/IP controller — no serial gateway PC
- 20-door capacity for mid-size commercial deployments
- 12VDC powered with RS-485 backhaul to legacy panels
Free shipping over $499$380.00 $261.99 Save $118.01 -
Save $0.95
Add to Cart The item has been addedKantech P10SHL ioProx Standard Clamshell Access Card
26-bit Wiegand clamshell card for Kantech ioProx systems
- ioProx clamshell card with hinged plastic protection
- Shields magnetic stripe and proximity element from wear
- Reduced replacement cycle in high-turnover environments
Free shipping over $499$3.94 $2.99 Save $0.95 -
Save $195.01
Kantech P225KPW26 ioProx Mullion Reader with Keypad
Mullion-mount reader with keypad and 26-bit Wiegand output
- ioProx mullion reader with integrated PIN keypad
- 26-bit Wiegand output for broad panel compatibility
- Compact mullion mount fits narrow door frames
Free shipping over $499$694.00 $498.99 Save $195.01 -
Save $184.01
Kantech P225KPXSF ioProx Mullion Reader with Keypad
ioProx mullion reader with keypad for glass door dual authentication
- ioProx XSF mullion reader with integrated PIN keypad
- Native Kantech K-Series integration without gateway
- 0.2 lb low-profile mullion mount for narrow frames
Free shipping over $499$650.00 $465.99 Save $184.01 -
Save $84.01
Add to Cart The item has been addedKantech P225W26 ioProx Mullion Reader
26-bit Wiegand mullion reader for door-frame proximity access
- ioProx mullion reader with 26-bit Wiegand output
- Compact 4.5 x 1.75 in profile fits narrow frames
- Direct integration with Kantech KT-series panels
Free shipping over $499$298.00 $213.99 Save $84.01 -
Save $60.01
Kantech P225W26OEM ioProx Reader Module
Compact ioProx reader module with 26-bit Wiegand for OEM integration
- ioProx reader module with 26-bit Wiegand output
- OEM module for integration into custom enclosures
- 14VDC operation with Kantech KSF format reading
Free shipping over $499$215.00 $154.99 Save $60.01 -
Save $81.01
Add to Cart The item has been addedKantech P225XSF ioProx Mullion Reader
ioProx reader sized for mullion mount in tight door frames
- ioProx mullion-mount reader for Kantech access deployments
- Compact form factor for door-frame and mullion installs
- Native ioProx for clean Kantech integration
Free shipping over $499$288.00 $206.99 Save $81.01 -
Save $61.01
Kantech P225XSFOEM ioProx Reader Module
Compact ioProx reader module for OEM embedded access control
- ioProx XSF format reader module for Kantech control panels
- Wiegand output for compatibility with most access platforms
- Compact OEM form factor for integration into custom enclosures
Free shipping over $499$217.00 $155.99 Save $61.01 -
Save $1.19
Kantech P30DMG ioProx Card with Magstripe
Dual-tech proximity + magstripe card for mixed-generation access control
- ioProx card with high-coercivity magstripe encoded
- 26-bit Wiegand contactless output for door readers
- Dual-tech card reduces credential stock complexity
Free shipping over $499$10.18 $8.99 Save $1.19 -
Save $195.01
Kantech P325KPW26 ioProx Single Gang Reader Keypad
Dual-auth reader + keypad in single gang form for 26-bit Wiegand systems
- ioProx single-gang reader with integrated keypad
- 26-bit Wiegand output for broad panel compatibility
- Card + PIN dual-mode authentication in one device
Free shipping over $499$694.00 $498.99 Save $195.01 -
Save $1.39
Add to Cart The item has been addedKantech P40KEY ioProx 26-bit Wiegand Keytag
Passive 26-bit Wiegand keytag for Kantech ioProx access control
- ioProx 26-bit Wiegand passive RFID keytag
- No batteries — electromagnetic induction powers reads
- Compact keychain form factor for daily carry
Free shipping over $499$8.38 $6.99 Save $1.39 -
Save $0.61
Kantech P50TAG ioProx Self-Adhesive Round Tag
Self-adhesive round proximity tag for ioProx and 26-bit Wiegand systems
- ioProx self-adhesive round tag for badges and assets
- 26-bit Wiegand format for broad reader compatibility
- Sticks directly to ID materials — no mounting hardware
Free shipping over $499$4.60 $3.99 Save $0.61 -
Save $273.01
Kantech P600 ioProx Long Range Proximity Reader
Long-range ioProx reader with 8MP imaging for enterprise access control
- ioProx long-range proximity reader with extended detection
- Dual format output: XSF and 26-bit Wiegand selectable
- Compatible with KT-400, KT-500, KT-900, and Wiegand panels
Free shipping over $499$970.00 $696.99 Save $273.01 -
Save $291.01
Kantech Paper Index Illuminated LED
LED-illuminated paper index for Kantech access control operator stations
- LED-illuminated paper index for low-light control rooms
- Printed tenant names and access levels at the panel
- 12VDC powered from KTES supply, no extra wiring
Free shipping over $499$1,035.00 $743.99 Save $291.01 -
Save $22.01
Kantech PB-EXIT Push Button with SPDT Switch
Non-illuminated push button with SPDT switch for manual door release
- Non-illuminated SPDT push button for door release
- Normally-open or normally-closed switching options
- Reduced power draw vs illuminated alternatives
Free shipping over $499$110.00 $87.99 Save $22.01 -
Save $183.01
Kantech SA-550 Stand-Alone Door Controller
Stand-alone 8-door controller with integrated proximity reader, no network needed
- Stand-alone door controller with integrated ioProx reader
- 1,000 user credential capacity for retail and warehouse sites
- No host PC required — credentials stored on device
Free shipping over $499$650.00 $466.99 Save $183.01 -
Save $0.56
Kantech SH-C1 ShadowProx Standard Clamshell Card
Standard clamshell proximity card for Kantech and HID systems
- ShadowProx standard clamshell card with KSF format
- Compatible with Kantech and HID proximity readers
- Durable hinged plastic for daily-use credential cards
Free shipping over $499$4.55 $3.99 Save $0.56 -
Save $1.09
Kantech SH-K1 ShadowProx Keytag
ShadowProx keytag credential for Kantech access control systems
- ShadowProx KSF keytag with proprietary Kantech encryption
- HID 4086X cross-compatibility for mixed-vendor sites
- Anti-cloning protection vs unencrypted 125kHz tags
Free shipping over $499$8.08 $6.99 Save $1.09 -
Save $2.09
Kantech ShadowProx Dye Sub Card KSF Blank Magstripe
Kantech KSF dye-sub card with blank magstripe for custom encoding
- ShadowProx dye-sub card with KSF format + blank magstripe
- Full-color fade-resistant photo printing
- Magstripe field ready for secondary encoding
Free shipping over $499$10.08 $7.99 Save $2.09
