Lifesafety Power · FPO75-B100C4PD8E4V

Lifesafety Power FPO75-B100C4PD8E4V FPO75-B100C4PD8E4V

75-watt enclosed power supply designed for distributed IP camera and access control deployments where centralized PoE or auxiliary 12V power

• 75W enclosed supply supports distributed IP camera and access control power loads.
• Fits wall-mount, DIN-rail, or cabinet installations for flexible deployment.
• Distributed sourcing reduces voltage drop on long cable runs and isolates circuit loads.

Lifesafety Power · FPO75-B100C4PD8PE1

Lifesafety Power FPO75-B100C4PD8PE1 75W Dvps 4 Lock Control Out

75W distributed power supply built for door access control installations where you need simultaneous lock control across four doors plus auxiliary

• 75W DVPS powers four independent lock circuits at up to 2.5A each.
• Eight auxiliary outputs support readers, REX buttons, and alert devices.
• UL Class 2 power-limited design eliminates conduit requirements in most jurisdictions.

Lifesafety Power · FPO75-B100C4PD8PE2M

Lifesafety Power FPO75-B100C4PD8PE2M FPO75-B100C4PD8PE2M

75-watt regulated power supply designed for access control, door lock, and security device integration in commercial facilities

• Delivers 75W of regulated 24VDC power for access control and door lock loads.
• Single-enclosure design consolidates multi-peripheral power distribution, reducing cabinet clutter.
• Sized for commercial access control systems; upgrade to 120W+ models for higher-load installs.

Lifesafety Power · FPO75-B100C4PD8PE2M/T4-A

Lifesafety Power FPO75-B100C4PD8PE2M/T4-A 4DR E2M 75W 2A/12V

Compact 75W power supply designed for access control, surveillance, and gate operator installations where simultaneous 12VDC and 24VDC distribution

• Dual isolated outputs (12VDC/2A and 24VDC/2A) eliminate separate supplies in mixed-voltage panels.
• Four dry-contact relay outputs supervise and switch access-controlled circuits independently.
• Eight auxiliary terminals support direct 12V/24V rail wiring across cameras, locks, and REX devices.

Lifesafety Power · FPO75-B100C4PD8PE4

Lifesafety Power FPO75-B100C4PD8PE4 Four Door Access Control

Four-door access control power distribution unit designed to supply and manage power to door strike mechanisms, mag locks, and related access control

• Four independent supervised outputs detect open-circuit or short-circuit faults per door.
• Supports 12VDC or 24VDC output selection to match mag locks or door strike hardware.
• Centralizes power distribution for up to four doors, reducing panel-side wiring complexity.

Lifesafety Power · FPO75-B100C4PD8PE4M

Lifesafety Power FPO75-B100C4PD8PE4M FPO75-B100C4PD8PE4M

75W access control power supply designed for Mercury-based lock and door control systems

• 75W supply delivers dual regulated 12V/2A and 24V/2A outputs simultaneously.
• Four dedicated Class 2 lock outputs plus eight auxiliary outputs in one enclosure.
• Compact E4M enclosure (14"H × 12"W × 4.5"D) fits wall-mount or rack installs.

Lifesafety Power · FPO75-B100C4PE1M

Lifesafety Power FPO75-B100C4PE1M FPO75-B100C4PE1M

75W dedicated power supply built to feed dual-voltage lock circuits in access control and entry security installations

• Delivers 2A @ 12V and 2A @ 24V simultaneously from a single 75W supply.
• Four Class 2 lock outputs support electric locks, strikes, and relay loads.
• E1M-rated enclosure fits wall or 19-inch rack mount in MDF or mechanical rooms.

Lifesafety Power · FPO75-B100C4PE1M/T2-A

Lifesafety Power FPO75-B100C4PE1M/T2-A 75W Dual Voltage 120 VAC

75W dual voltage power supply rated for 120 VAC input, designed to distribute power and control signal switching across access control and

• 75W capacity supports up to 4 relay lock outputs for multi-door access deployments.
• 120 VAC input integrates directly into standard commercial mains on a dedicated 15A circuit.
• Centralized relay switching reduces wiring complexity across 4–8 access points per unit.

Lifesafety Power · FPO75-B100C8D8E2-3SL1

Lifesafety Power FPO75-B100C8D8E2-3SL1 6DR Dv E2 75W 8 Lock and 8

75W regulated power supply designed to drive access control systems with integrated electronic lock supervision

• Dual 12VDC/24VDC outputs support mixed-voltage readers and maglocks on one supply.
• 8 lock supervision channels enable real-time electromagnetic lock status monitoring.
• 3 included Salto mounting plates accelerate commissioning on multi-door Salto deployments.

Lifesafety Power · FPO75-B100C8D8E2M

Lifesafety Power FPO75-B100C8D8E2M 75W Dual Voltage 120 VAC 8 Re

75W dual voltage (120 VAC) power supply designed for commercial surveillance, access control, and security integration installations

• 75W dual-voltage output supports mixed 12VDC/24VDC loads across multi-zone deployments.
• Eight relay outputs switch door strikes and mag-locks from a single centralized supply.
• Eight auxiliary outputs connect sensors and indicators without additional distribution hardware.

Lifesafety Power · FPO75-B100D8E4P

Lifesafety Power FPO75-B100D8E4P FPO75-B100D8E4P

75W regulated power supply designed for distributed IP security deployments

• 75W regulated output supports multi-device loads without cascading power loss.
• Filtered DC output reduces noise-induced jitter in video and prevents reader resets.
• Cabinet or wall-mount design suits controlled-environment installs in access control racks.

Lifesafety Power · FPO75-B100E1

Lifesafety Power FPO75-B100E1 Dvps Fpo/B100 Combination Up To A 2

75W dual-output power supply housed in an E1 enclosure, delivering up to 2A at 12V and 2A at 24V in the same unit

• Dual-rail 12V and 24V DC outputs eliminate separate supply runs in mixed systems.
• 75W total capacity supports up to 2A per rail for concurrent multi-device loads.
• E1 enclosure suits flush or panel mounting in racks, closets, or wall installs.

Lifesafety Power · FPO75-B100E1M

Lifesafety Power FPO75-B100E1M FPO75-B100E1M

75-watt regulated power supply designed for security integrators deploying networked video surveillance and access control systems

• Delivers 75W of regulated DC output to keep cameras, switches, and controllers stable.
• Designed for commercial and industrial security deployments requiring clean, protected power.
• Mount in a ventilated enclosure; verify load budget and wire gauge before installation.

Lifesafety Power · FPO75-C4D8PE2M

Lifesafety Power FPO75-C4D8PE2M 75W Single Voltage 120 VAC 4 Rel

75W single-voltage power supply rated for 120 VAC input, designed to feed access control systems, electric locks, and auxiliary surveillance

• 75W single-voltage supply consolidates power for multi-door access control deployments.
• 4 relay outputs switch mag locks, door strikes, or auxiliary devices from one unit.
• 8 auxiliary outputs support readers, sensors, and indicators on 120 VAC mains input.

Lifesafety Power · FPO75-C4D8PE4M

Lifesafety Power FPO75-C4D8PE4M 75W Single Voltage 120 VAC 4 Rel

75W single voltage (120VAC input) power supply purpose-built for access control, lock, and surveillance equipment requiring reliable 24VDC

• 75W 24VDC output powers electric strikes, mag locks, and auxiliary sensors.
• 4 dry-contact relay outputs (NO/NC) enable independent zone switching per lock.
• 8 auxiliary circuits allow separate device groups without an added control layer.

Lifesafety Power · FPO75-C4D8PE4M/T4-A

Lifesafety Power FPO75-C4D8PE4M/T4-A FPO75-C4D8PE4M/T4-A

75-watt uninterruptible power supply designed to maintain continuity in networked security systems during mains failure

Lifesafety Power · FPO75-C4E1-DM2

Lifesafety Power FPO75-C4E1-DM2 75W Single Voltage 120 VAC 4 Rel

75W single voltage power supply rated for 120VAC input, delivering regulated DC output with four relay-switched lock outputs — the core power and

• 75W regulated output powers mag locks, strikes, and REX devices across 4 doors.
• Four individually supervised relay outputs prevent cross-load faults in multi-door deployments.
• 120VAC hardwired input suits dedicated-circuit electrical closet installations.

Lifesafety Power · FPO75-C4E1M

Lifesafety Power FPO75-C4E1M FPO75-C4E1M

75W managed power distribution unit designed for security installations requiring supervised, monitored output circuits

• Four independent supervised outputs isolate faults without disrupting remaining circuits.
• 75W capacity delivers regulated 12VDC or 24VDC across mixed access control and camera loads.
• Integrated battery backup supports continuity during brief outages on 120 VAC input systems.

Lifesafety Power · FPO75-C4PE1

Lifesafety Power FPO75-C4PE1 FPO75-C4PE1

75W Class 2 power supply designed to deliver supervised DC power to access control systems, electric strike locks, door holders, and other security

• Four independent 2.5A Class 2 outputs let you supervise one lock circuit per door.
• Selectable 12VDC/6A or 24VDC/3A output suits most electric strike and mag-lock loads.
• NEMA 1 E1 enclosure mounts directly in control rooms or secure equipment cabinets.

Lifesafety Power · FPO75-C4PE2M

Lifesafety Power FPO75-C4PE2M QUICK GUIDE Mercury Backplat

Reference guide document designed for integrators deploying Lifesafety Power equipment with Mercury Backplate architecture

• Consolidates wiring diagrams and specs to accelerate Mercury Backplate deployments.
• Covers voltage, amperage, battery backup, and supervision signaling in one reference.
• Keep on-site for faster troubleshooting of Lifesafety Power access control systems.

Lifesafety Power · FPO75-C8D8E1

Lifesafety Power FPO75-C8D8E1 8 Lock 8 Auxiliary Outputs Fused

75W cabinet-mount power distribution unit designed to provision and supervise multiple low-voltage security devices from a central location

• Eight independently fused 3A auxiliary outputs prevent a single fault from dropping the panel.
• Supports 12VDC or 24VDC topologies, covering standard strikes, mag locks, and card readers.
• 75W cabinet-mount form factor fits single-building or multi-zone access control deployments.

Lifesafety Power · FPO75-C8E2

Lifesafety Power FPO75-C8E2 FPO75-C8E2

12VDC power supply designed to support surveillance camera installations and access control systems requiring distributed 12-volt power delivery

• Delivers 12VDC output to support analog and IP cameras plus access control loads.
• Multi-output design centralizes power distribution, reducing field wiring complexity.
• Compatible with 110–240VAC input, simplifying deployment across regional installations.

Lifesafety Power · FPO75-C8E2M

Lifesafety Power FPO75-C8E2M Power Suppy board 75W 6A/12Vor 3A/2

75W power distribution module designed to supply regulated 12V and 24V outputs to networked security and life-safety equipment

• Delivers 75W at 6A/12VDC or 3A/24VDC to match mixed-voltage load requirements.
• Board-level format enables compact integration into custom enclosures or retrofit cabinets.
• Dual-voltage output reduces the need for separate supplies in camera and access control deployments.

Lifesafety Power · FPO75-C8PE1

Lifesafety Power FPO75-C8PE1 8 lock outputs class 2 power limited

75W class 2 power-limited supply designed to feed multiple electromagnetic or solenoid locks in distributed door-control installations

• 8 independent 2.5A lock outputs eliminate per-output fusing under Class 2 rating.
• Selectable 12V/6A or 24V/3A output supports maglocks and solenoid strikes in one unit.
• 75W wall-mount supply fits retrofit and new-build access control cabinets on 120V AC.

Lifesafety Power · FPO75-D8E1

Lifesafety Power FPO75-D8E1 8 Aux Outputs 6A/12V Or 3A/24VFUSED @

75W regulated power supply designed to distribute auxiliary power across networked security systems requiring redundant or independent feeds to door

• Eight independently fused outputs prevent cascade failures when a single load shorts.
• Supports 6A per output at 12V or 3A per output at 24V for mixed-voltage deployments.
• 75W regulated budget powers door strikes, sensors, and relay circuits from one cabinet unit.

Lifesafety Power · FPO75-D8E1-2SL1

Lifesafety Power FPO75-D8E1-2SL1 4DR Sv E1 75W 8 Aux Outputs Two

75W distributed power supply designed for hardwired access control installations where field-mounted 12V and 24V power distribution is required

• Dual-voltage output (12VDC/6A or 24VDC/3A) matches most door controllers and locks.
• Eight auxiliary outputs distribute power to multiple devices from one 75W enclosure.
• Two integrated Salto plates simplify field mounting for Salto-compatible deployments.

Lifesafety Power · FPO75-D8E1M

Lifesafety Power FPO75-D8E1M FPO75-D8E1M

75W centralized power supply designed to consolidate AC-to-DC conversion and battery backup for distributed IP security cameras and access control

• 75W capacity across 8 independent outputs simplifies multi-camera power distribution.
• Integrated battery backup maintains cameras and access control during AC mains loss.
• Single centralized supply reduces wiring runs and cuts installation labor vs. per-device adapters.

Lifesafety Power · FPO75-D8E1R

Lifesafety Power FPO75-D8E1R 6A/12V OR 3A/24V 8 AUX OUTPUTSE1 RED

75W Class 2 power-limited supply designed to feed multiple auxiliary devices in surveillance and access control installations

• Delivers 6A/12V or 3A/24V at 75W to power up to eight auxiliary devices.
• Each of the eight outputs is individually fused at 2.5A, isolating faults per zone.
• E1-rated red enclosure meets fire-alarm and life-safety code marking requirements.

Lifesafety Power · FPO75-D8E2

Lifesafety Power FPO75-D8E2 FPO75-D8E2

75-watt supervised power supply designed to centralize power distribution for security and access control systems

• Eight supervised outputs let one unit power cameras, locks, and readers from a single point.
• 75 W total budget distributes across multiple devices without overloading a single feeder line.
• Integrated battery charger enables backup hold-up for door locks and alarms during mains failure.

Lifesafety Power · FPO75-D8E2-4SL1

Lifesafety Power FPO75-D8E2-4SL1 8DR Sv E2 75W 8 Aux Outputs Four

75W distributed power supply designed to feed multiple door locks, readers, and ancillary devices in access control systems

• 75W output delivers 6A@12V or 3A@24V to power locks, readers, and ancillary devices.
• Eight isolated auxiliary outputs limit fault blast radius — one shorted circuit won't drop the full zone.
• Integrates with Salto electronic lock systems and Wiegand or IP-based reader infrastructures.

Lifesafety Power · FPO75-D8E2M

Lifesafety Power FPO75-D8E2M FPO75-D8E2M

Compact, wall-mounted uninterruptible power supply (UPS) designed to maintain power to critical security equipment during AC mains failure

• 75W UPS capacity sustains access control readers, locks, and intercoms during AC failure.
• Compact wall-mount form factor fits tight ceiling and wall cavities in small-to-medium installs.
• Battery backup operation maintains power continuity for light-duty surveillance equipment on-site.

Lifesafety Power · FPO75-D8E4M

Lifesafety Power FPO75-D8E4M FPO75-D8E4M

75W redundant power supply designed to eliminate single points of failure in distributed security installations

• 75W redundant supply eliminates single points of failure in distributed security installs.
• Dual independent AC input channels auto-switch on failure without dropping the connected load.
• Fits access control and surveillance power distribution architectures requiring redundancy.

Lifesafety Power · FPO75-D8E4P

Lifesafety Power FPO75-D8E4P FPO75-D8E4P

75-watt supervised power supply engineered for access control, alarm signaling, and distributed security loads where output monitoring and battery

• 8 supervised outputs detect open circuits and load faults, alerting the control panel instantly.
• 75W capacity supports multiple card readers, electric locks, or siren circuits from one unit.
• Battery backup ready — maintains door lock power during AC loss without additional hardware.

Lifesafety Power · FPO75-D8E4S

Lifesafety Power FPO75-D8E4S FPO75-D8E4S

75-watt regulated power supply designed to support distributed security infrastructure deployments

• 75W total output powers cameras, readers, locks, and aux devices from one supply.
• Multiple independent output channels let you balance load distribution across circuits.
• Centralized sourcing eliminates per-endpoint adapters, simplifying conduit runs.

Lifesafety Power · FPO75-D8PE1

Lifesafety Power FPO75-D8PE1 FPO75-D8PE1

75W Class 2 auxiliary power supply designed to feed multiple low-voltage devices from a single source

• 8 independent Class 2 outputs, each fused at 2.5A, prevent cascade failures.
• 75W capacity delivers 6A at 12VDC or 3A at 24VDC from a single supply point.
• E1 enclosure suits indoor control rooms, closets, and equipment cabinet installs.

Lifesafety Power · FPO75-D8PE2VM/P

Lifesafety Power FPO75-D8PE2VM/P FPO75-D8PE2VM/P

12VDC/24VDC auxiliary power distribution enclosure designed to serve as a secondary power feed for surveillance system peripherals — card readers

• Delivers 6A at 12VDC or 3A at 24VDC across eight Class II power-limited outputs.
• 20"H × 16"W × 4.5"D enclosure mounts in standard electrical closets or cabinets.
• Centralizes auxiliary power for card readers, electric locks, and sensor loops.