Lifesafety Power FPO75-D8E1 75W Multi-Output Power Supply

Overview

The FPO75-D8E1 is a 75W regulated power supply designed to distribute auxiliary power across networked security systems requiring redundant or independent feeds to door locks, sensors, and peripheral devices. Eight independently fused outputs provide circuit protection at the source, eliminating cascade failures if a single load shorts. The unit accepts both 12VDC and 24VDC configurations (6A per output at 12V, 3A per output at 24V), making it compatible with mixed-voltage installations common in larger access control and integrated security deployments.

Compatibility

The FPO75-D8E1 integrates with security control panels, NVRs, and access management systems requiring distributed auxiliary power. Verify input voltage requirements and total load calculation before ordering—75W total budget means you cannot simultaneously run all eight outputs at maximum current. Typical use: door strike feeds, sensor power, relay circuits, and indicator lights in cabinet-mounted installations.

Installation Notes

Mount in a standard equipment enclosure with adequate ventilation. Each of the eight outputs is fused independently—document breaker positions during commissioning. Confirm input source voltage (check your control panel's power output rating) before wiring. Do not exceed 75W aggregate load across all outputs; oversizing leads to nuisance fuse trips under peak demand.