Lifesafety Power FPO75-D8E1-2SL1 75W Multi-Output Access Control Power Supply

Overview

The FPO75-D8E1-2SL1 is a 75W distributed power supply designed for hardwired access control installations where field-mounted 12V and 24V power distribution is required downstream of the main panel. It outputs either 6 amps at 12VDC or 3 amps at 24VDC—dual-selectable to match your door controller, strike, or reader voltage—with eight auxiliary outputs to power multiple devices from a single enclosure. This form factor (14 × 12 × 4.5 inches) fits standard vertical rack or wall mounting in electrical rooms, closets, or equipment cabinets, reducing wiring runs and voltage drop across longer cable pulls to remote readers or electrified hardware.

Compatibility

The FPO75-D8E1-2SL1 integrates with hardwired door controller systems, electrified strike locks, magnetic locks, and readers that operate on 12V or 24V DC. It includes two Salto plates, supporting integration with Salto systems where plate mounting is required. The eight auxiliary outputs enable parallel distribution to multiple access control devices without additional relays or secondary supplies, provided total load does not exceed the 75W power budget.

Installation Notes

Enclosure dimensions are 14 × 12 × 4.5 inches. Select output voltage (12V or 24V) at installation based on your controller and lock voltage requirements; switching between modes requires internal reconfiguration. Verify total connected load against the 75W rating before final commissioning. The supply is intended for indoor or protected cabinet installation.