Lifesafety Power FPO75-C4D8PE4M 75W Power Supply
Overview
The FPO75-C4D8PE4M is a 75W single voltage (120VAC input) power supply purpose-built for access control, lock, and surveillance equipment requiring reliable 24VDC distribution. It delivers 4 relay-controlled lock outputs plus 8 additional auxiliary circuits — the split architecture lets you manage different zones or device groups independently without a separate control layer. Typical deployments: small-to-medium security systems needing managed power and relay switching for electric strikes, mag locks, and auxiliary sensors without programmable logic.
Compatibility
This supply works with any 24VDC access control reader, electric lock, or surveillance auxiliary device rated for 75W total draw. Common integrations include Honeywell Vista panels, Hikvision NVRs with relay trigger inputs, and standard exit devices requiring 24VDC and relay-switched control. Verify your end-device voltage specification — this unit is 120VAC input only; 24VDC output. If your system requires 12VDC or mixed voltages, a different model will be needed.
Installation Notes
120VAC input requires standard building power or UPS backup — no PoE or low-voltage riser available here. The 4 relay outputs are potential-free (dry contacts) and support NO/NC wiring; size conductors according to lock coil inrush current (typically 24VDC solenoid locks draw 0.5–2A at strike). Ensure adequate conduit routing for the 8 auxiliary output circuits to avoid cross-talk with analog sensor lines. Mount in a secure enclosure or rack — this is a panel supply, not a field unit.
